[PATCH V9 1/4] pci: Add PCIe driver for Samsung Exynos

Sachin Kamat sachin.kamat at linaro.org
Fri Jun 21 00:10:48 EDT 2013


Hi Jingoo,

Some small corrections inline.

On 21 June 2013 08:51, Jingoo Han <jg1.han at samsung.com> wrote:
> Exynos5440 has a PCIe controller which can be used as Root Complex.
> This driver supports a PCIe controller as Root Complex mode.
>
> Signed-off-by: Surendranath Gurivireddy Balla <suren.reddy at samsung.com>
> Signed-off-by: Siva Reddy Kallam <siva.kallam at samsung.com>
> Signed-off-by: Jingoo Han <jg1.han at samsung.com>
> Acked-by: Arnd Bergmann <arnd at arndb.de>
> ---
>  .../devicetree/bindings/pci/designware-pcie.txt    |   73 ++
>  drivers/pci/host/Kconfig                           |    9 +
>  drivers/pci/host/Makefile                          |    1 +
>  drivers/pci/host/pci-designware.c                  | 1057 ++++++++++++++++++++
>  4 files changed, 1140 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/designware-pcie.txt
>  create mode 100644 drivers/pci/host/pci-designware.c
>
> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
> new file mode 100644
> index 0000000..e4681e6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
> @@ -0,0 +1,73 @@
> +* Synopsis Designware PCIe interface
> +
> +Required properties:
> +-compatible: should contain "snps,dw-pcie" to identify the
> +       core, plus an identifier for the specific instance, such
> +       as "samsung,exynos5440-pcie".
> +-reg: base addresses and lengths of the pcie conteroller,

s/conteroller/controller

> +       the phy controller, additional register for the phy controller.
> +- interrupts: interrupt values for level interrupt,
> +       pulse interrupt, special interrupt.
> +- clocks: from common clock binding: handle to pci clock.
> +- clock-names: from common clock binding: Shall be "pcie", "pcie_bus".

s/Shall be .../should be "pcie" and "pcie_bus".

[snip]

> +
> +MODULE_AUTHOR("Jingoo Han <jg1.han at samsung.com>");
> +MODULE_DESCRIPTION("Samsung PCIe host controller driver");
> +MODULE_LICENSE("GPLv2");

I think this should be "GPL v2"  (with a space between GPL and v2).


-- 
With warm regards,
Sachin



More information about the linux-arm-kernel mailing list