[PATCH v6 0/8] Initial Device Tree support for S3C64xx
Tomasz Figa
tomasz.figa at gmail.com
Thu Jun 20 20:35:16 EDT 2013
This series adds Device Tree support for Samsung S3C64xx SoC series.
It fixes several problems preventing from booting an S3C64xx-based system
using Device Tree, adds all the infrastructure for Device Tree-based board
support, including mach-s3c64xx-dt and dts include files for S3C64xx SoCs,
and basic device tree source for FriendlyARM Mini6410 and SAMSUNG SMDK6410
boards.
Current support is somewhat limite, but should be fine as a start and
will be extended in future, hopefully with help of S3C64xx board
maintainers.
Depends on:
- [PATCH 0/7] Common Clock Framework support for Samsung S3C64xx
http://comments.gmane.org/gmane.linux.usb.general/87571
Changes since v5:
- Rebased onto current for-next branch of Kgene's tree,
- Added support for new Common Clock Framework based clock driver,
- Introduced hierarchical structure of device nodes (representing
physical AHB and APB buses),
- Bypassed most of legacy initialization when booting with DT,
- Used preprocessor macros in dts files to improve readabilty,
- Added support for SMDK6410 board.
Changes since v4:
- Rebased onto current for-next branch of Kgene's tree
- Added support for pinctrl (driver merged through pinctrl tree)
- Added labels to all nodes that can be overridden from board dts
- Modified board dts to use the &label syntax to reference device nodes
Changes since v3:
- Rebased onto current for-next branch of Kgene's tree
- Updated timer node for next version of samsung-time patches
- Replaced local s3c64xx_dt_init_irq with irqchip_init
Changes since v2:
- Updated timer node for next version of samsung-time patches
Changes since v1:
- Dropped two VIC-related patches that are no longer necessary
- Added Device Tree-based instantation of system timers
- Corrected VIC interrupt specifiers
- Adjusted CPU compatible values and dropped @id
Tomasz Figa (8):
ARM: common: vic: Parse interrupt and resume masks from device tree
ARM: s3c64xx: Bypass legacy initialization when booting with DT
gpio: samsung: Skip legacy GPIO registration if pinctrl-s3c64xx is
present
ARM: Add .init_platform() callback to machine descriptor
ARM: s3c64xx: Add board file for boot using Device Tree
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
ARM: dts: Add dts file for S3C6410-based Mini6410 board
ARM: dts: Add dts file for S3C6410-based SMDK6410 board
Documentation/devicetree/bindings/arm/vic.txt | 6 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/s3c6400.dtsi | 41 ++
arch/arm/boot/dts/s3c6410-mini6410.dts | 199 ++++++++
arch/arm/boot/dts/s3c6410-smdk6410.dts | 93 ++++
arch/arm/boot/dts/s3c6410.dtsi | 41 ++
arch/arm/boot/dts/s3c64xx-pinctrl.dtsi | 687 ++++++++++++++++++++++++++
arch/arm/boot/dts/s3c64xx.dtsi | 190 +++++++
arch/arm/include/asm/mach/arch.h | 1 +
arch/arm/kernel/irq.c | 3 +
arch/arm/mach-s3c64xx/Kconfig | 16 +
arch/arm/mach-s3c64xx/Makefile | 1 +
arch/arm/mach-s3c64xx/common.c | 12 +
arch/arm/mach-s3c64xx/dma.c | 9 +
arch/arm/mach-s3c64xx/irq-pm.c | 9 +
arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c | 83 ++++
arch/arm/mach-s3c64xx/s3c6400.c | 9 +
arch/arm/mach-s3c64xx/s3c6410.c | 9 +
arch/arm/plat-samsung/init.c | 12 +-
drivers/gpio/gpio-samsung.c | 3 +-
drivers/irqchip/irq-vic.c | 7 +-
21 files changed, 1430 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/boot/dts/s3c6400.dtsi
create mode 100644 arch/arm/boot/dts/s3c6410-mini6410.dts
create mode 100644 arch/arm/boot/dts/s3c6410-smdk6410.dts
create mode 100644 arch/arm/boot/dts/s3c6410.dtsi
create mode 100644 arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/s3c64xx.dtsi
create mode 100644 arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
--
1.8.2.1
More information about the linux-arm-kernel
mailing list