[PATCH v7 08/11] clk: samsung: Add set_rate() clk_ops for PLL35xx
Yadwinder Singh Brar
yadi.brar at samsung.com
Tue Jun 11 05:31:13 EDT 2013
This patch add set_rate() and round_rate() for PLL35xx
Reviewed-by: Doug Anderson <dianders at chromium.org>
Reviewed-by: Tomasz Figa <t.figa at samsung.com>
Signed-off-by: Yadwinder Singh Brar <yadi.brar at samsung.com>
---
drivers/clk/samsung/clk-pll.c | 105 ++++++++++++++++++++++++++++++++++++++++-
1 files changed, 104 insertions(+), 1 deletions(-)
diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index adc0659..b5c8b15 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -24,16 +24,51 @@ struct samsung_clk_pll {
#define to_clk_pll(_hw) container_of(_hw, struct samsung_clk_pll, hw)
+static const struct samsung_pll_rate_table *samsung_get_pll_settings(
+ struct samsung_clk_pll *pll, unsigned long rate)
+{
+ const struct samsung_pll_rate_table *rate_table = pll->rate_table;
+ int i;
+
+ for (i = 0; i < pll->rate_count; i++) {
+ if (rate == rate_table[i].rate)
+ return &rate_table[i];
+ }
+
+ return NULL;
+}
+
+static long samsung_pll_round_rate(struct clk_hw *hw,
+ unsigned long drate, unsigned long *prate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ const struct samsung_pll_rate_table *rate_table = pll->rate_table;
+ int i;
+
+ /* Assumming rate_table is in descending order */
+ for (i = 0; i < pll->rate_count; i++) {
+ if (drate >= rate_table[i].rate)
+ return rate_table[i].rate;
+ }
+
+ /* return minimum supported value */
+ return rate_table[i - 1].rate;
+}
+
/*
* PLL35xx Clock Type
*/
+/* Maximum lock time can be 270 * PDIV cycles */
+#define PLL35XX_LOCK_FACTOR (270)
#define PLL35XX_MDIV_MASK (0x3FF)
#define PLL35XX_PDIV_MASK (0x3F)
#define PLL35XX_SDIV_MASK (0x7)
+#define PLL35XX_LOCK_STAT_MASK (0x1)
#define PLL35XX_MDIV_SHIFT (16)
#define PLL35XX_PDIV_SHIFT (8)
#define PLL35XX_SDIV_SHIFT (0)
+#define PLL35XX_LOCK_STAT_SHIFT (29)
static unsigned long samsung_pll35xx_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
@@ -53,8 +88,73 @@ static unsigned long samsung_pll35xx_recalc_rate(struct clk_hw *hw,
return (unsigned long)fvco;
}
+static inline bool samsung_pll35xx_mp_change(
+ const struct samsung_pll_rate_table *rate, u32 pll_con)
+{
+ u32 old_mdiv, old_pdiv;
+
+ old_mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
+ old_pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
+
+ return (rate->mdiv != old_mdiv || rate->pdiv != old_pdiv);
+}
+
+static int samsung_pll35xx_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ const struct samsung_pll_rate_table *rate;
+ u32 tmp;
+
+ /* Get required rate settings from table */
+ rate = samsung_get_pll_settings(pll, drate);
+ if (!rate) {
+ pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+ drate, __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ tmp = __raw_readl(pll->con_reg);
+
+ if (!(samsung_pll35xx_mp_change(rate, tmp))) {
+ /* If only s change, change just s value only*/
+ tmp &= ~(PLL35XX_SDIV_MASK << PLL35XX_SDIV_SHIFT);
+ tmp |= rate->sdiv << PLL35XX_SDIV_SHIFT;
+ __raw_writel(tmp, pll->con_reg);
+
+ return 0;
+ }
+
+ /* Set PLL lock time. */
+ __raw_writel(rate->pdiv * PLL35XX_LOCK_FACTOR,
+ pll->lock_reg);
+
+ /* Change PLL PMS values */
+ tmp &= ~((PLL35XX_MDIV_MASK << PLL35XX_MDIV_SHIFT) |
+ (PLL35XX_PDIV_MASK << PLL35XX_PDIV_SHIFT) |
+ (PLL35XX_SDIV_MASK << PLL35XX_SDIV_SHIFT));
+ tmp |= (rate->mdiv << PLL35XX_MDIV_SHIFT) |
+ (rate->pdiv << PLL35XX_PDIV_SHIFT) |
+ (rate->sdiv << PLL35XX_SDIV_SHIFT);
+ __raw_writel(tmp, pll->con_reg);
+
+ /* wait_lock_time */
+ do {
+ cpu_relax();
+ tmp = __raw_readl(pll->con_reg);
+ } while (!(tmp & (PLL35XX_LOCK_STAT_MASK
+ << PLL35XX_LOCK_STAT_SHIFT)));
+ return 0;
+}
+
static const struct clk_ops samsung_pll35xx_clk_ops = {
.recalc_rate = samsung_pll35xx_recalc_rate,
+ .round_rate = samsung_pll_round_rate,
+ .set_rate = samsung_pll35xx_set_rate,
+};
+
+static const struct clk_ops samsung_pll35xx_clk_min_ops = {
+ .recalc_rate = samsung_pll35xx_recalc_rate,
};
/*
@@ -384,7 +484,10 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
/* clk_ops for 35xx and 2550 are similar */
case pll_35xx:
case pll_2550:
- init.ops = &samsung_pll35xx_clk_ops;
+ if (!pll->rate_table)
+ init.ops = &samsung_pll35xx_clk_min_ops;
+ else
+ init.ops = &samsung_pll35xx_clk_ops;
break;
/* clk_ops for 36xx and 2650 are similar */
case pll_36xx:
--
1.7.0.4
More information about the linux-arm-kernel
mailing list