[PATCH V6 3/3] ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC

Tomasz Figa t.figa at samsung.com
Thu Jun 20 05:36:20 EDT 2013


On Thursday 20 of June 2013 17:25:12 Jingoo Han wrote:
> On Thursday, June 20, 2013 5:04 PM, Tomasz Figa wrote:
> > Hi Jingoo,
> > 
> > On Thursday 20 of June 2013 16:12:24 Jingoo Han wrote:
> > > Exynos5440 has two PCIe controllers which can be used as root complex
> > > for PCIe interface.
> > > 
> > > Signed-off-by: Jingoo Han <jg1.han at samsung.com>
> > > ---
> > > 
> > >  arch/arm/boot/dts/exynos5440-ssdk5440.dts |    8 ++++++
> > >  arch/arm/boot/dts/exynos5440.dtsi         |   40
> > > 
> > > ++++++++++++++++++++++++++++- 2 files changed, 47 insertions(+), 1
> > > deletion(-)
> > > 
> > > diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
> > > b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index f32cd77..3d93804
> > > 100644
> > > --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
> > > +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
> > > @@ -65,4 +65,12 @@
> > > 
> > >  			clock-frequency = <50000000>;
> > >  		
> > >  		};
> > >  	
> > >  	};
> > > 
> > > +
> > > +	pcie0 at 290000 {
> > > +		reset-gpio = <&pin_ctrl 5 0>;
> > > +	};
> > > +
> > > +	pcie1 at 2a0000 {
> > > +		reset-gpio = <&pin_ctrl 22 0>;
> > > +	};
> > > 
> > >  };
> > > 
> > > diff --git a/arch/arm/boot/dts/exynos5440.dtsi
> > > b/arch/arm/boot/dts/exynos5440.dtsi index 03d40c0..6295eda 100644
> > > --- a/arch/arm/boot/dts/exynos5440.dtsi
> > > +++ b/arch/arm/boot/dts/exynos5440.dtsi
> > > @@ -126,7 +126,7 @@
> > > 
> > >  		clock-names = "spi", "spi_busclk0";
> > >  	
> > >  	};
> > > 
> > > -	pinctrl {
> > > +	pin_ctrl: pinctrl {
> > > 
> > >  		compatible = "samsung,exynos5440-pinctrl";
> > >  		reg = <0xE0000 0x1000>;
> > >  		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
> > > 
> > > @@ -230,4 +230,42 @@
> > > 
> > >  		clocks = <&clock 24>;
> > >  		clock-names = "usbhost";
> > >  	
> > >  	};
> > 
> > I think this patch should be split into two:
> >  - patch adding just generlic PCIe nodes for Exynos5440,
> >  - patch adding label to the pinctrl node (which is a prerequisite) and
> > 
> > board-specific properties of PCIe nodes.
> 
> Do you mean the following?
> 
> 1. patch adding just generlic PCIe nodes for Exynos5440
>     [PATCH] ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
> 
> arch/arm/boot/dts/exynos5440.dtsi
> +
> +	pcie at 290000 {
> +		compatible = "samsung,exynos5440-pcie";
> +		reg = <0x290000 0x1000
> +			0x270000 0x1000
> +			0x271000 0x40>;
> +		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
> +		clocks = <&clock 28>, <&clock 27>;
> +		clock-names = "pcie", "pcie_bus";
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		device_type = "pci";
> +		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000   /*
> configuration space */ +			  0x81000000 0 0	  0x40001000 0 0x00010000  
> /* downstream I/O */ +			  0x82000000 0 0x40011000 0x40011000 0
> 0x1ffef000>; /* non-prefetchable memory */ +		#interrupt-cells = <1>;
> +		interrupt-map-mask = <0 0 0 0>;
> +		interrupt-map = <0x0 0 &gic 53>;
> +	};
> +
> +	pcie at 2a0000 {
> +		compatible = "samsung,exynos5440-pcie";
> +		reg = <0x2a0000 0x1000
> +			0x272000 0x1000
> +			0x271040 0x40>;
> +		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
> +		clocks = <&clock 29>, <&clock 27>;
> +		clock-names = "pcie", "pcie_bus";
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		device_type = "pci";
> +		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000   /*
> configuration space */ +			  0x81000000 0 0	  0x60001000 0 0x00010000  
> /* downstream I/O */ +			  0x82000000 0 0x60011000 0x60011000 0
> 0x1ffef000>; /* non-prefetchable memory */ +		#interrupt-cells = <1>;
> +		interrupt-map-mask = <0 0 0 0>;
> +		interrupt-map = <0x0 0 &gic 56>;
> +	};
> 
> 
> 
> 2. patch adding label to the pinctrl node (which is a prerequisite) and
>     board-specific properties of PCIe nodes.
>    [PATCH] ARM: dts: Add pcie controller node for exynos5440-ssdk5440
> 
> arch/arm/boot/dts/exynos5440-ssdk5440.dts
> +
> +	pcie0 at 290000 {
> +		reset-gpio = <&pin_ctrl 5 0>;
> +	};
> +
> +	pcie1 at 2a0000 {
> +		reset-gpio = <&pin_ctrl 22 0>;
> +	};
> 
> arch/arm/boot/dts/exynos5440.dtsi
> -	pinctrl {
> +	pin_ctrl: pinctrl {
> 

Exactly.

> > > +
> > > +	pcie0 at 290000 {
> > 
> > Node naming looks incorrect here. The name should be as generic as
> > possible, without any hardware-specific IDs, e.g. pcie, not pcie0. The
> > @290000 suffix is enough to make the node unique.
> 
> I see. You are right.
> I will fix it.

Thanks.

Best regards,
Tomasz

> Best regards,
> Jingoo Han
> 
> > > +		compatible = "samsung,exynos5440-pcie";
> > > +		reg = <0x290000 0x1000
> > > +			0x270000 0x1000
> > > +			0x271000 0x40>;
> > > +		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
> > > +		clocks = <&clock 28>, <&clock 27>;
> > > +		clock-names = "pcie", "pcie_bus";
> > > +		#address-cells = <3>;
> > > +		#size-cells = <2>;
> > > +		device_type = "pci";
> > > +		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000
> > 
> > /*
> > 
> > > configuration space */ +			  0x81000000 0 0
> > 
> > 0x40001000 0 0x00010000
> > 
> > > /* downstream I/O */ +			  0x82000000 0 0x40011000
> > 
> > 0x40011000 0
> > 
> > > 0x1ffef000>; /* non-prefetchable memory */ +		#interrupt-cells =
> > 
> > <1>;
> > 
> > > +		interrupt-map-mask = <0 0 0 0>;
> > > +		interrupt-map = <0x0 0 &gic 53>;
> > > +	};
> > > +
> > > +	pcie1 at 2a0000 {
> > 
> > Same here.
> > 
> > Best regards,
> > Tomasz
> > 
> > > +		compatible = "samsung,exynos5440-pcie";
> > > +		reg = <0x2a0000 0x1000
> > > +			0x272000 0x1000
> > > +			0x271040 0x40>;
> > > +		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
> > > +		clocks = <&clock 29>, <&clock 27>;
> > > +		clock-names = "pcie", "pcie_bus";
> > > +		#address-cells = <3>;
> > > +		#size-cells = <2>;
> > > +		device_type = "pci";
> > > +		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000
> > 
> > /*
> > 
> > > configuration space */ +			  0x81000000 0 0
> > 
> > 0x60001000 0 0x00010000
> > 
> > > /* downstream I/O */ +			  0x82000000 0 0x60011000
> > 
> > 0x60011000 0
> > 
> > > 0x1ffef000>; /* non-prefetchable memory */ +		#interrupt-cells =
> > 
> > <1>;
> > 
> > > +		interrupt-map-mask = <0 0 0 0>;
> > > +		interrupt-map = <0x0 0 &gic 56>;
> > > +	};
> > > 
> > >  };
> 
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



More information about the linux-arm-kernel mailing list