[PATCH] ARM: EXYNOS: Fix incorrect usage of S5P_ARM_CORE1_* registers

Chander Kashyap chander.kashyap at linaro.org
Wed Jun 19 11:07:10 EDT 2013


On 19 June 2013 20:31, Tomasz Figa <t.figa at samsung.com> wrote:
> On Wednesday 19 of June 2013 20:26:50 Chander Kashyap wrote:
>> On 19 June 2013 19:58, Tomasz Figa <t.figa at samsung.com> wrote:
>> > On Wednesday 19 of June 2013 19:25:27 Chander Kashyap wrote:
>> >> On 19 June 2013 19:19, Tomasz Figa <t.figa at samsung.com> wrote:
>> >> > On Wednesday 19 of June 2013 14:24:17 Lorenzo Pieralisi wrote:
>> >> >> On Wed, Jun 19, 2013 at 01:50:57PM +0100, Tomasz Figa wrote:
>> >> >> > On Wednesday 19 of June 2013 17:39:21 Chander Kashyap wrote:
>> >> >> > > On 18 June 2013 23:29, Kukjin Kim <kgene.kim at samsung.com>
> wrote:
>> >> >> > > > On 06/19/13 02:45, Tomasz Figa wrote:
>> >> >> > > >> Ccing Arnd and Olof, because I forgot to add them to git
>> >> >> > > >> send-email...
>> >> >> > > >>
>> >> >> > > >> Sorry for the noise.
>> >> >> > > >>
>> >> >> > > >> On Tuesday 18 of June 2013 17:26:31 Tomasz Figa wrote:
>> >> >> > > >>> S5P_ARM_CORE1_* registers affect only core 1. To control
>> >> >> > > >>> further
>> >> >> > > >>> cores
>> >> >> > > >>> properly another registers must be used.
>> >> >> > > >>>
>> >> >> > > >>> This patch replaces S5P_ARM_CORE1_* register definitions
>> >> >> > > >>> with
>> >> >> > > >>> S5P_ARM_CORE_*(x) macro which return addresses of registers
>> >> >> > > >>> for
>> >> >> > > >>> specified core.
>> >> >> > > >>>
>> >> >> > > >>> This fixes CPU hotplug on quad core Exynos SoCs on which
>> >> >> > > >>> currently
>> >> >> > > >>> offlining CPUs 2 or 3 caused CPU 1 to be turned off.
>> >> >> > > >>
>> >> >> > > >> Obviously this doesn't happen currently because of the if
>> >> >> > > >> (cpu
>> >> >> > > >> ==
>> >> >> > > >> 1),
>> >> >> > > >> but>
>> >> >> > > >
>> >> >> > > > Yes, not happened...and just note exynos5440 doesn't support
>> >> >> > > > hotplug :)
>> >> >> > > > so this is available on exynos4412 and added 5420.
>> >> >> > > >
>> >> >> > > >> if logical cpu1 turned out not to be physical cpu1, then it
>> >> >> > > >> would
>> >> >> > > >> crash.
>> >> >> > > >>
>> >> >> > > >> Best regards,
>> >> >> > > >> Tomasz
>> >> >> > > >>
>> >> >> > > >>> In addition,
>> >> >> > > >>> bring-up of CPU 2 and 3 is fixed on boards where bootloader
>> >> >> > > >>> powers
>> >> >> > > >>> off
>> >> >> > > >>> secondary cores by default.
>> >> >> > > >
>> >> >> > > > I need to test on board about above...
>> >> >> > > >
>> >> >> > > >>> Cc: stable at vger.kernel.org
>> >> >> > > >>> Signed-off-by: Tomasz Figa<t.figa at samsung.com>
>> >> >> > > >>> Signed-off-by: Kyungmin Park<kyungmin.park at samsung.com>
>> >> >> > > >>> ---
>> >> >> > > >>>
>> >> >> > > >>>   arch/arm/mach-exynos/hotplug.c               |  9
>> >> >> > > >>>   +++++----
>> >> >> > > >>>   arch/arm/mach-exynos/include/mach/regs-pmu.h | 10
>> >> >> > > >>>   +++++++---
>> >> >> > > >>>   arch/arm/mach-exynos/platsmp.c               |  9
>> >> >> > > >>>   +++++----
>> >> >> > > >>>   3 files changed, 17 insertions(+), 11 deletions(-)
>> >> >> > > >>>
>> >> >> > > >>> diff --git a/arch/arm/mach-exynos/hotplug.c
>> >> >> > > >>> b/arch/arm/mach-exynos/hotplug.c index af90cfa..c089943
>> >> >> > > >>> 100644
>> >> >> > > >>> --- a/arch/arm/mach-exynos/hotplug.c
>> >> >> > > >>> +++ b/arch/arm/mach-exynos/hotplug.c
>> >> >> > > >>> @@ -93,10 +93,11 @@ static inline void
>> >> >> > > >>> cpu_leave_lowpower(void)
>> >> >> > > >>>
>> >> >> > > >>>   static inline void platform_do_lowpower(unsigned int cpu,
>> >> >> > > >>>   int
>> >> >> > > >>>
>> >> >> > > >>> *spurious) {
>> >> >> > > >>>
>> >> >> > > >>>         for (;;) {
>> >> >> > > >>>
>> >> >> > > >>> +               void __iomem *reg_base;
>> >> >> > > >>> +               unsigned int phys_cpu =
>> >> >> > > >>> cpu_logical_map(cpu);
>> >> >> > > >>>
>> >> >> > > >>> -               /* make cpu1 to be turned off at next WFI
>> >> >> > > >>> command
>> >> >> > > >>> */
>> >> >> > > >>> -               if (cpu == 1)
>> >> >> > > >>> -                       __raw_writel(0,
>> >> >> > > >>> S5P_ARM_CORE1_CONFIGURATION);
>> >> >> > > >>> +               reg_base =
>> >> >> > > >>> S5P_ARM_CORE_CONFIGURATION(phys_cpu);
>> >> >> > >
>> >> >> > > Tomasz,
>> >> >> > > This will break for non-zero, MPIDR value.  Say if MPIDR is 1
>> >> >> > > then
>> >> >> > > for
>> >> >> > > cpu0 phys_cpu value will be 0x100,
>> >> >> > > and address calculation will be   (S5P_ARM_CORE0_CONFIGURATION
>> >> >> > > +
>> >> >> > > ((0x101) * 0x80)), which is wrong.
>> >> >>
>> >> >> Honestly, I did not understand the reasoning above, please clarify.
>> >> >>
>> >> >> > Hmm, according to the code initializing __cpu_logical_map[] array
>> >> >> > this
>> >> >> > is not true.
>> >> >> >
>> >> >> > Here's the code:
>> >> >> >
>> >> >> > https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/
>> >> >> > tre
>> >> >> > e/a
>> >> >> > rch/arm/kernel/setup.c?id=refs/tags/next-20130619#n468
>> >> >> >
>> >> >> > and for used macros and bitmasks:
>> >> >> >
>> >> >> > https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/
>> >> >> > tre
>> >> >> > e/a
>> >> >> > rch/arm/include/asm/cputype.h?id=refs/tags/next-20130619#n45
>> >> >> >
>> >> >> > Now the structure of the MPIDR register:
>> >> >> >
>> >> >> > http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi03
>> >> >> > 88e
>> >> >> > /CI
>> >> >> > HEBGFG.html
>> >> >> >
>> >> >> > As you can see, the value read from the register in
>> >> >> > smp_setup_processor_id() is only the physical CPU ID, so I don't
>> >> >> > see
>> >> >> > any
>> >> >> > problem here.
>> >> >>
>> >> >> Define "physical CPU ID" :-)
>> >> >>
>> >> >> There is a problem here: the MPIDR is not an index, and the
>> >> >> cpu_logical_map is populated in arm_dt_init_cpu_maps in:
>> >> >>
>> >> >> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tre
>> >> >> e/a
>> >> >> rch /arm/kernel/devtree.c?id=refs/tags/v3.10-rc6
>> >> >>
>> >> >> with all affinity levels.
>> >> >
>> >> > OK. This is what I was missing. Thanks.
>> >> >
>> >> >> You need to perform a mapping between logical cpus and registers
>> >> >> offset,
>> >> >> you can't use the cpu_logical_map directly for that.
>> >> >
>> >> > Hmm, can't I just extract cluster ID and CPU ID from the MPIDR value
>> >> > and
>> >> > use them appropriately to calculate register offsets?
>> >>
>> >> That will create problem for multi-cluster systems. Say we have two
>> >> clusters then with clusterID 0 and 1. So phys-cpu will be 0x0/0x100,
>> >> 0x1/0x101 ans so on.
>> >
>> > I mean, calculate register offset based on two parameters - cluster ID
>> > and>
>> > CPU ID, like:
>> >         ...
>> >
>> >         u32 mpidr = cpu_logical_map(cpu);
>> >         u32 phys_cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
>> >
>> >         if (soc_is_exynosXXXX()) {
>> >
>> >                 u32 cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
>> >
>> >                 phys_cpu += EXYNOSXXXX_CPUS_PER_CLUSTER * cluster;
>> >
>> >         }
>> >
>> >         reg_base = S5P_ARM_CORE_CONFIGURATION(phys_cpu);
>> >         __raw_writel(0, reg_base);
>>
>> This does not seems to viable solution, as eg. clusterID for
>> exynos4210 is 0x9 and exynos 4412 is 0xa.
>
> We don't need to consider cluster ID for any SoC that has just one cluster.
> That's why there is the if (soc_is_exynosXXXX()) clause, where exynosXXXX
> is the SoC that we support and has more clusters.
>
>> But if we wass the cpu nodes
>> thru DT, the we can comfortably rely on the logical cpu number. Also
>> EXYNOSXXXX_CPUS_PER_CLUSTER can vary from cluster to cluster.
>
> There is nothing that prevents you from specifying the CPUs in DT in
> different order. Moreover, even if you specify them in correct order, there
> is nothing that prevents you from using any of the listed CPUs as boot CPU,
> which will get the logical ID of 0.
Ah Sorry I missed this point.
Then either pass the power register address thru dt or do the way you described.
Thanks
>
> Best regards,
> Tomasz
>
>> >         ...
>> >
>> > Best regards,
>> > Tomasz
>> >
>> >> > Best regards,
>> >> > Tomasz
>> >> >
>> >> >> Next accident waiting to happen is GIC code
>> >> >> (CONFIG_GIC_NON_BANKED),
>> >> >> where cpu_logical_map is used erroneously as an index.
>> >> >>
>> >> >> Lorenzo
>> >>
>> >> --
>> >> with warm regards,
>> >> Chander Kashyap
>> >> --
>> >> To unsubscribe from this list: send the line "unsubscribe
>> >> linux-samsung-soc" in the body of a message to
>> >> majordomo at vger.kernel.org
>> >> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>> --
>> with warm regards,
>> Chander Kashyap
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html



--
with warm regards,
Chander Kashyap



More information about the linux-arm-kernel mailing list