OMAP4430 failure to boot

[Sricharan R]

On Wednesday 19 June 2013 02:50 PM, Sricharan R wrote:
> Hi Russell,
>
> On Wednesday 19 June 2013 02:06 PM, Russell King - ARM Linux wrote:
>> On Tue, Jun 18, 2013 at 11:43:07PM -0700, Tony Lindgren wrote:
>>> * Russell King - ARM Linux <linux at arm.linux.org.uk> [130618 11:40]:
>>>> So... the boot and build system last night managed to build its kernels
>>>> after I dropped a couple of patches from my kernel, but we've gone from
>>>> having both the 3430LDP and 4430SDP booting to only the 3430LDP.
>>>>
>>>> Something has broken 4430SDP during the last week, and so far I've no
>>>> idea what.  The 4430 seems to be utterly immune to any kind of debugging.
>>>> It:
>>>>
>>>> (a) doesn't produce any decompressor output because its part of the
>>>> multiplatform kernel.  This means I've no idea if the decompressor is
>>>> working or not.
>>>>
>>>> (b) doesn't produce any output from the kernel via the use of printch()
>>>> in the early assembly, nor via adding printascii() into printk().
>>>>
>>>> Will has tested v3.10-rc6, and that works.  Will tested v3.10-rc6 plus
>>>> arm-soc for-next, and got:
>>>>
>>>> 	Error: unrecognized/unsupported machine ID (r1 = 0x00000ae7).
>>> It's because it's DT only. I guess we could have some minimal generic
>>> file handling that machine ID to produce an error to avoid having
>>> to debug things?
>>>
>>> If you have arm-soc for-next, omap4 is now DT only. So you have to
>>> have CONFIG_ARM_APPENDED_DTB=y, CONFIG_ARM_ATAG_DTB_COMPAT=y and
>>> CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y and append the .dtb to
>>> zImage to boot. Or you can also update u-boot to pass the .dtb.
>>> There are more accurate instructions in arm-soc commit b42b9181.
>>>
>>> Moving omap4 to be DT only has been about 5900 lines of reduced data
>>> and code so far, so that's a good reason for doing it. Most things
>>> should work as earlier, except for the pandaboard EHCI is still missing
>>> a fix for adding a clock alias for the auxclk. If there are things not
>>> working, they should be quite easy to fix.
>> Right, so as I said I'm taking OMAP4 out of the build/boot test system,
>> which can't currently cope with jumping through the hoops to get DT to
>> work.
>>
>> And since no one tells me anything about where to get updated uboots from
>> for TI's boards, I'm not about to play boot loader roulette trying to
>> build my own.
>>
>  Regarding u-boot, the mainline[1] supports booting with DT.
>
>   bootm kernel_load_address - dt_blob_load_address
>  
>  [1] git://git.denx.de/u-boot.git
  Sorry, forget to mention the configs
  make omap4_panda and omap4_sdp respectively.

Regards,
 Sricharan