[RFC PATCH v3] dmabuf-sync: Introduce buffer synchronization framework
Inki Dae
inki.dae at samsung.com
Wed Jun 19 05:10:21 EDT 2013
This patch adds a buffer synchronization framework based on DMA BUF[1]
and reservation[2] to use dma-buf resource, and based on ww-mutexes[3]
for lock mechanism.
The purpose of this framework is to provide not only buffer access control
to CPU and DMA but also easy-to-use interfaces for device drivers and
potentially user application (not implemented for user applications, yet).
And this framework can be used for all dma devices using system memory as
dma buffer, especially for most ARM based SoCs.
Changelog v3:
- remove cache operation relevant codes and update document file.
Changelog v2:
- use atomic_add_unless to avoid potential bug.
- add a macro for checking valid access type.
- code clean.
The mechanism of this framework has the following steps,
1. Register dmabufs to a sync object - A task gets a new sync object and
can add one or more dmabufs that the task wants to access.
This registering should be performed when a device context or an event
context such as a page flip event is created or before CPU accesses a shared
buffer.
dma_buf_sync_get(a sync object, a dmabuf);
2. Lock a sync object - A task tries to lock all dmabufs added in its own
sync object. Basically, the lock mechanism uses ww-mutex[1] to avoid dead
lock issue and for race condition between CPU and CPU, CPU and DMA, and DMA
and DMA. Taking a lock means that others cannot access all locked dmabufs
until the task that locked the corresponding dmabufs, unlocks all the locked
dmabufs.
This locking should be performed before DMA or CPU accesses these dmabufs.
dma_buf_sync_lock(a sync object);
3. Unlock a sync object - The task unlocks all dmabufs added in its own sync
object. The unlock means that the DMA or CPU accesses to the dmabufs have
been completed so that others may access them.
This unlocking should be performed after DMA or CPU has completed accesses
to the dmabufs.
dma_buf_sync_unlock(a sync object);
4. Unregister one or all dmabufs from a sync object - A task unregisters
the given dmabufs from the sync object. This means that the task dosen't
want to lock the dmabufs.
The unregistering should be performed after DMA or CPU has completed
accesses to the dmabufs or when dma_buf_sync_lock() is failed.
dma_buf_sync_put(a sync object, a dmabuf);
dma_buf_sync_put_all(a sync object);
The described steps may be summarized as:
get -> lock -> CPU or DMA access to a buffer/s -> unlock -> put
This framework includes the following two features.
1. read (shared) and write (exclusive) locks - A task is required to declare
the access type when the task tries to register a dmabuf;
READ, WRITE, READ DMA, or WRITE DMA.
The below is example codes,
struct dmabuf_sync *sync;
sync = dmabuf_sync_init(NULL, "test sync");
dmabuf_sync_get(sync, dmabuf, DMA_BUF_ACCESS_R);
...
And the below can be used as access types:
DMA_BUF_ACCESS_R - CPU will access a buffer for read.
DMA_BUF_ACCESS_W - CPU will access a buffer for read or write.
DMA_BUF_ACCESS_DMA_R - DMA will access a buffer for read
DMA_BUF_ACCESS_DMA_W - DMA will access a buffer for read or
write.
2. Mandatory resource releasing - a task cannot hold a lock indefinitely.
A task may never try to unlock a buffer after taking a lock to the buffer.
In this case, a timer handler to the corresponding sync object is called
in five (default) seconds and then the timed-out buffer is unlocked by work
queue handler to avoid lockups and to enforce resources of the buffer.
The below is how to use:
1. Allocate and Initialize a sync object:
struct dmabuf_sync *sync;
sync = dmabuf_sync_init(NULL, "test sync");
...
2. Add a dmabuf to the sync object when setting up dma buffer relevant
registers:
dmabuf_sync_get(sync, dmabuf, DMA_BUF_ACCESS_READ);
...
3. Lock all dmabufs of the sync object before DMA or CPU accesses
the dmabufs:
dmabuf_sync_lock(sync);
...
4. Now CPU or DMA can access all dmabufs locked in step 3.
5. Unlock all dmabufs added in a sync object after DMA or CPU access
to these dmabufs is completed:
dmabuf_sync_unlock(sync);
And call the following functions to release all resources,
dmabuf_sync_put_all(sync);
dmabuf_sync_fini(sync);
You can refer to actual example codes:
https://git.kernel.org/cgit/linux/kernel/git/daeinki/drm-exynos.git/
commit/?h=dmabuf-sync&id=4030bdee9bab5841ad32faade528d04cc0c5fc94
https://git.kernel.org/cgit/linux/kernel/git/daeinki/drm-exynos.git/
commit/?h=dmabuf-sync&id=6ca548e9ea9e865592719ef6b1cde58366af9f5c
[1] http://lwn.net/Articles/470339/
[2] http://lwn.net/Articles/532616/
[3] https://patchwork.kernel.org/patch/2625361/
Signed-off-by: Inki Dae <inki.dae at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
Documentation/dma-buf-sync.txt | 199 ++++++++++++++++
drivers/base/Kconfig | 7 +
drivers/base/Makefile | 1 +
drivers/base/dmabuf-sync.c | 501 ++++++++++++++++++++++++++++++++++++++++
include/linux/dma-buf.h | 14 ++
include/linux/dmabuf-sync.h | 115 +++++++++
include/linux/reservation.h | 7 +
7 files changed, 844 insertions(+), 0 deletions(-)
create mode 100644 Documentation/dma-buf-sync.txt
create mode 100644 drivers/base/dmabuf-sync.c
create mode 100644 include/linux/dmabuf-sync.h
diff --git a/Documentation/dma-buf-sync.txt b/Documentation/dma-buf-sync.txt
new file mode 100644
index 0000000..134de7b
--- /dev/null
+++ b/Documentation/dma-buf-sync.txt
@@ -0,0 +1,199 @@
+ DMA Buffer Synchronization Framework
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ Inki Dae
+ <inki dot dae at samsung dot com>
+ <daeinki at gmail dot com>
+
+This document is a guide for device-driver writers describing the DMA buffer
+synchronization API. This document also describes how to use the API to
+use buffer synchronization mechanism between DMA and DMA, CPU and DMA, and
+CPU and CPU.
+
+The DMA Buffer synchronization API provides buffer synchronization mechanism;
+i.e., buffer access control to CPU and DMA, and easy-to-use interfaces for
+device drivers and potentially user application (not implemented for user
+applications, yet). And this API can be used for all dma devices using system
+memory as dma buffer, especially for most ARM based SoCs.
+
+
+Motivation
+----------
+
+Buffer synchronization issue between DMA and DMA:
+ Sharing a buffer, a device cannot be aware of when the other device
+ will access the shared buffer: a device may access a buffer containing
+ wrong data if the device accesses the shared buffer while another
+ device is still accessing the shared buffer.
+ Therefore, a user process should have waited for the completion of DMA
+ access by another device before a device tries to access the shared
+ buffer.
+
+Buffer synchronization issue between CPU and DMA:
+ A user process should consider that when having to send a buffer, filled
+ by CPU, to a device driver for the device driver to access the buffer as
+ a input buffer while CPU and DMA are sharing the buffer.
+ This means that the user process needs to understand how the device
+ driver is worked. Hence, the conventional mechanism not only makes
+ user application complicated but also incurs performance overhead.
+
+Buffer synchronization issue between CPU and CPU:
+ In case that two processes share one buffer; shared with DMA also,
+ they may need some mechanism to allow process B to access the shared
+ buffer after the completion of CPU access by process A.
+ Therefore, process B should have waited for the completion of CPU access
+ by process A using the mechanism before trying to access the shared
+ buffer.
+
+What is the best way to solve these buffer synchronization issues?
+ We may need a common object that a device driver and a user process
+ notify the common object of when they try to access a shared buffer.
+ That way we could decide when we have to allow or not to allow for CPU
+ or DMA to access the shared buffer through the common object.
+ If so, what could become the common object? Right, that's a dma-buf[1].
+ Now we have already been using the dma-buf to share one buffer with
+ other drivers.
+
+
+Basic concept
+-------------
+
+The mechanism of this framework has the following steps,
+ 1. Register dmabufs to a sync object - A task gets a new sync object and
+ can add one or more dmabufs that the task wants to access.
+ This registering should be performed when a device context or an event
+ context such as a page flip event is created or before CPU accesses a shared
+ buffer.
+
+ dma_buf_sync_get(a sync object, a dmabuf);
+
+ 2. Lock a sync object - A task tries to lock all dmabufs added in its own
+ sync object. Basically, the lock mechanism uses ww-mutexes[2] to avoid dead
+ lock issue and for race condition between CPU and CPU, CPU and DMA, and DMA
+ and DMA. Taking a lock means that others cannot access all locked dmabufs
+ until the task that locked the corresponding dmabufs, unlocks all the locked
+ dmabufs.
+ This locking should be performed before DMA or CPU accesses these dmabufs.
+
+ dma_buf_sync_lock(a sync object);
+
+ 3. Unlock a sync object - The task unlocks all dmabufs added in its own sync
+ object. The unlock means that the DMA or CPU accesses to the dmabufs have
+ been completed so that others may access them.
+ This unlocking should be performed after DMA or CPU has completed accesses
+ to the dmabufs.
+
+ dma_buf_sync_unlock(a sync object);
+
+ 4. Unregister one or all dmabufs from a sync object - A task unregisters
+ the given dmabufs from the sync object. This means that the task dosen't
+ want to lock the dmabufs.
+ The unregistering should be performed after DMA or CPU has completed
+ accesses to the dmabufs or when dma_buf_sync_lock() is failed.
+
+ dma_buf_sync_put(a sync object, a dmabuf);
+ dma_buf_sync_put_all(a sync object);
+
+ The described steps may be summarized as:
+ get -> lock -> CPU or DMA access to a buffer/s -> unlock -> put
+
+This framework includes the following two features.
+ 1. read (shared) and write (exclusive) locks - A task is required to declare
+ the access type when the task tries to register a dmabuf;
+ READ, WRITE, READ DMA, or WRITE DMA.
+
+ The below is example codes,
+ struct dmabuf_sync *sync;
+
+ sync = dmabuf_sync_init(NULL, "test sync");
+
+ dmabuf_sync_get(sync, dmabuf, DMA_BUF_ACCESS_R);
+ ...
+
+ 2. Mandatory resource releasing - a task cannot hold a lock indefinitely.
+ A task may never try to unlock a buffer after taking a lock to the buffer.
+ In this case, a timer handler to the corresponding sync object is called
+ in five (default) seconds and then the timed-out buffer is unlocked by work
+ queue handler to avoid lockups and to enforce resources of the buffer.
+
+
+Access types
+------------
+
+DMA_BUF_ACCESS_R - CPU will access a buffer for read.
+DMA_BUF_ACCESS_W - CPU will access a buffer for read or write.
+DMA_BUF_ACCESS_DMA_R - DMA will access a buffer for read
+DMA_BUF_ACCESS_DMA_W - DMA will access a buffer for read or write.
+
+
+API set
+-------
+
+bool is_dmabuf_sync_supported(void)
+ - Check if dmabuf sync is supported or not.
+
+struct dmabuf_sync *dmabuf_sync_init(void *priv, const char *name)
+ - Allocate and initialize a new sync object. The caller can get a new
+ sync object for buffer synchronization. priv is used to set caller's
+ private data and name is the name of sync object.
+
+void dmabuf_sync_fini(struct dmabuf_sync *sync)
+ - Release all resources to the sync object.
+
+int dmabuf_sync_get(struct dmabuf_sync *sync, void *sync_buf,
+ unsigned int type)
+ - Add a dmabuf to a sync object. The caller can group multiple dmabufs
+ by calling this function several times. Internally, this function also
+ takes a reference to a dmabuf.
+
+void dmabuf_sync_put(struct dmabuf_sync *sync, struct dma_buf *dmabuf)
+ - Remove a given dmabuf from a sync object. Internally, this function
+ also release every reference to the given dmabuf.
+
+void dmabuf_sync_put_all(struct dmabuf_sync *sync)
+ - Remove all dmabufs added in a sync object. Internally, this function
+ also release every reference to the dmabufs of the sync object.
+
+int dmabuf_sync_lock(struct dmabuf_sync *sync)
+ - Lock all dmabufs added in a sync object. The caller should call this
+ function prior to CPU or DMA access to the dmabufs so that others can
+ not access the dmabufs. Internally, this function avoids dead lock
+ issue with ww-mutexes.
+
+int dmabuf_sync_unlock(struct dmabuf_sync *sync)
+ - Unlock all dmabufs added in a sync object. The caller should call
+ this function after CPU or DMA access to the dmabufs is completed so
+ that others can access the dmabufs.
+
+
+Tutorial
+--------
+
+1. Allocate and Initialize a sync object:
+ struct dmabuf_sync *sync;
+
+ sync = dmabuf_sync_init(NULL, "test sync");
+ ...
+
+2. Add a dmabuf to the sync object when setting up dma buffer relevant registers:
+ dmabuf_sync_get(sync, dmabuf, DMA_BUF_ACCESS_READ);
+ ...
+
+3. Lock all dmabufs of the sync object before DMA or CPU accesses the dmabufs:
+ dmabuf_sync_lock(sync);
+ ...
+
+4. Now CPU or DMA can access all dmabufs locked in step 3.
+
+5. Unlock all dmabufs added in a sync object after DMA or CPU access to these
+ dmabufs is completed:
+ dmabuf_sync_unlock(sync);
+
+ And call the following functions to release all resources,
+ dmabuf_sync_put_all(sync);
+ dmabuf_sync_fini(sync);
+
+
+References:
+[1] http://lwn.net/Articles/470339/
+[2] https://patchwork.kernel.org/patch/2625361/
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 5ccf182..54a1d5a 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -212,6 +212,13 @@ config FENCE_TRACE
lockup related problems for dma-buffers shared across multiple
devices.
+config DMABUF_SYNC
+ bool "DMABUF Synchronization Framework"
+ depends on DMA_SHARED_BUFFER
+ help
+ This option enables dmabuf sync framework for buffer synchronization between
+ DMA and DMA, CPU and DMA, and CPU and CPU.
+
config CMA
bool "Contiguous Memory Allocator"
depends on HAVE_DMA_CONTIGUOUS && HAVE_MEMBLOCK
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index 8a55cb9..599f6c90 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -11,6 +11,7 @@ obj-y += power/
obj-$(CONFIG_HAS_DMA) += dma-mapping.o
obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o
obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf.o fence.o reservation.o
+obj-$(CONFIG_DMABUF_SYNC) += dmabuf-sync.o
obj-$(CONFIG_ISA) += isa.o
obj-$(CONFIG_FW_LOADER) += firmware_class.o
obj-$(CONFIG_NUMA) += node.o
diff --git a/drivers/base/dmabuf-sync.c b/drivers/base/dmabuf-sync.c
new file mode 100644
index 0000000..7f3ac81
--- /dev/null
+++ b/drivers/base/dmabuf-sync.c
@@ -0,0 +1,501 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics Co.Ltd
+ * Authors:
+ * Inki Dae <inki.dae at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+
+#include <linux/dmabuf-sync.h>
+
+#define MAX_SYNC_TIMEOUT 5 /* Second. */
+
+int dmabuf_sync_enabled = 1;
+
+MODULE_PARM_DESC(enabled, "Check if dmabuf sync is supported or not");
+module_param_named(enabled, dmabuf_sync_enabled, int, 0444);
+
+static void dmabuf_sync_timeout_worker(struct work_struct *work)
+{
+ struct dmabuf_sync *sync = container_of(work, struct dmabuf_sync, work);
+ struct dmabuf_sync_object *sobj;
+
+ mutex_lock(&sync->lock);
+
+ list_for_each_entry(sobj, &sync->syncs, head) {
+ if (WARN_ON(!sobj->robj))
+ continue;
+
+ printk(KERN_WARNING "%s: timeout = 0x%x [type = %d, " \
+ "refcnt = %d, locked = %d]\n",
+ sync->name, (u32)sobj->dmabuf,
+ sobj->access_type,
+ atomic_read(&sobj->robj->shared_cnt),
+ sobj->robj->locked);
+
+ /* unlock only valid sync object. */
+ if (!sobj->robj->locked)
+ continue;
+
+ if (sobj->robj->shared &&
+ atomic_add_unless(&sobj->robj->shared_cnt, -1, 1))
+ continue;
+
+ ww_mutex_unlock(&sobj->robj->lock);
+
+ if (sobj->access_type & DMA_BUF_ACCESS_R)
+ printk(KERN_WARNING "%s: r-unlocked = 0x%x\n",
+ sync->name, (u32)sobj->dmabuf);
+ else
+ printk(KERN_WARNING "%s: w-unlocked = 0x%x\n",
+ sync->name, (u32)sobj->dmabuf);
+ }
+
+ sync->status = 0;
+ mutex_unlock(&sync->lock);
+
+ dmabuf_sync_put_all(sync);
+ dmabuf_sync_fini(sync);
+}
+
+static void dmabuf_sync_lock_timeout(unsigned long arg)
+{
+ struct dmabuf_sync *sync = (struct dmabuf_sync *)arg;
+
+ schedule_work(&sync->work);
+}
+
+static int dmabuf_sync_lock_objs(struct dmabuf_sync *sync,
+ struct ww_acquire_ctx *ctx)
+{
+ struct dmabuf_sync_object *contended_sobj = NULL;
+ struct dmabuf_sync_object *res_sobj = NULL;
+ struct dmabuf_sync_object *sobj = NULL;
+ int ret;
+
+ if (ctx)
+ ww_acquire_init(ctx, &reservation_ww_class);
+
+retry:
+ list_for_each_entry(sobj, &sync->syncs, head) {
+ if (WARN_ON(!sobj->robj))
+ continue;
+
+ /* Don't lock in case of read and read. */
+ if (sobj->robj->accessed_type & DMA_BUF_ACCESS_R &&
+ sobj->access_type & DMA_BUF_ACCESS_R) {
+ atomic_inc(&sobj->robj->shared_cnt);
+ sobj->robj->shared = true;
+ continue;
+ }
+
+ if (sobj == res_sobj) {
+ res_sobj = NULL;
+ continue;
+ }
+
+ ret = ww_mutex_lock(&sobj->robj->lock, ctx);
+ if (ret < 0) {
+ contended_sobj = sobj;
+
+ if (ret == -EDEADLK)
+ printk(KERN_WARNING"%s: deadlock = 0x%x\n",
+ sync->name, (u32)sobj->dmabuf);
+ goto err;
+ }
+
+ sobj->robj->locked = true;
+ }
+
+ if (ctx)
+ ww_acquire_done(ctx);
+
+ init_timer(&sync->timer);
+
+ sync->timer.data = (unsigned long)sync;
+ sync->timer.function = dmabuf_sync_lock_timeout;
+ sync->timer.expires = jiffies + (HZ * MAX_SYNC_TIMEOUT);
+
+ add_timer(&sync->timer);
+
+ return 0;
+
+err:
+ list_for_each_entry_continue_reverse(sobj, &sync->syncs, head) {
+ /* Don't need to unlock in case of read and read. */
+ if (atomic_add_unless(&sobj->robj->shared_cnt, -1, 1))
+ continue;
+
+ ww_mutex_unlock(&sobj->robj->lock);
+ sobj->robj->locked = false;
+ }
+
+ if (res_sobj) {
+ if (!atomic_add_unless(&res_sobj->robj->shared_cnt, -1, 1)) {
+ ww_mutex_unlock(&res_sobj->robj->lock);
+ res_sobj->robj->locked = false;
+ }
+ }
+
+ if (ret == -EDEADLK) {
+ ww_mutex_lock_slow(&contended_sobj->robj->lock, ctx);
+ res_sobj = contended_sobj;
+
+ goto retry;
+ }
+
+ if (ctx)
+ ww_acquire_fini(ctx);
+
+ return ret;
+}
+
+static void dmabuf_sync_unlock_objs(struct dmabuf_sync *sync,
+ struct ww_acquire_ctx *ctx)
+{
+ struct dmabuf_sync_object *sobj;
+
+ if (list_empty(&sync->syncs))
+ return;
+
+ mutex_lock(&sync->lock);
+
+ list_for_each_entry(sobj, &sync->syncs, head) {
+ if (sobj->robj->shared) {
+ if (atomic_add_unless(&sobj->robj->shared_cnt, -1 , 1))
+ continue;
+
+ ww_mutex_unlock(&sobj->robj->lock);
+ sobj->robj->shared = false;
+ sobj->robj->locked = false;
+ } else {
+ ww_mutex_unlock(&sobj->robj->lock);
+ sobj->robj->locked = false;
+ }
+ }
+
+ mutex_unlock(&sync->lock);
+
+ if (ctx)
+ ww_acquire_fini(ctx);
+
+ del_timer(&sync->timer);
+}
+
+/**
+ * is_dmabuf_sync_supported - Check if dmabuf sync is supported or not.
+ */
+bool is_dmabuf_sync_supported(void)
+{
+ return dmabuf_sync_enabled == 1;
+}
+EXPORT_SYMBOL(is_dmabuf_sync_supported);
+
+/**
+ * dmabuf_sync_init - Allocate and initialize a dmabuf sync.
+ *
+ * @priv: A device private data.
+ * @name: A sync object name.
+ *
+ * This function should be called when a device context or an event
+ * context such as a page flip event is created. And the created
+ * dmabuf_sync object should be set to the context.
+ * The caller can get a new sync object for buffer synchronization
+ * through this function.
+ */
+struct dmabuf_sync *dmabuf_sync_init(void *priv, const char *name)
+{
+ struct dmabuf_sync *sync;
+
+ sync = kzalloc(sizeof(*sync), GFP_KERNEL);
+ if (!sync)
+ return ERR_PTR(-ENOMEM);
+
+ strncpy(sync->name, name, ARRAY_SIZE(sync->name) - 1);
+
+ sync->priv = priv;
+ INIT_LIST_HEAD(&sync->syncs);
+ mutex_init(&sync->lock);
+ INIT_WORK(&sync->work, dmabuf_sync_timeout_worker);
+
+ return sync;
+}
+EXPORT_SYMBOL(dmabuf_sync_init);
+
+/**
+ * dmabuf_sync_fini - Release a given dmabuf sync.
+ *
+ * @sync: An object to dmabuf_sync structure.
+ *
+ * This function should be called if some operation is failed after
+ * dmabuf_sync_init call to release relevant resources, and after
+ * dmabuf_sync_unlock function is called.
+ */
+void dmabuf_sync_fini(struct dmabuf_sync *sync)
+{
+ if (WARN_ON(!sync))
+ return;
+
+ kfree(sync);
+}
+EXPORT_SYMBOL(dmabuf_sync_fini);
+
+/*
+ * dmabuf_sync_get_obj - Add a given object to syncs list.
+ *
+ * @sync: An object to dmabuf_sync structure.
+ * @dmabuf: An object to dma_buf structure.
+ * @type: A access type to a dma buf.
+ * The DMA_BUF_ACCESS_R means that this dmabuf could be accessed by
+ * others for read access. On the other hand, the DMA_BUF_ACCESS_W
+ * means that this dmabuf couldn't be accessed by others but would be
+ * accessed by caller's dma exclusively. And the DMA_BUF_ACCESS_DMA can be
+ * combined.
+ *
+ * This function creates and initializes a new dmabuf sync object and it adds
+ * the dmabuf sync object to syncs list to track and manage all dmabufs.
+ */
+static int dmabuf_sync_get_obj(struct dmabuf_sync *sync, struct dma_buf *dmabuf,
+ unsigned int type)
+{
+ struct dmabuf_sync_object *sobj;
+
+ if (!dmabuf->resv) {
+ WARN_ON(1);
+ return -EFAULT;
+ }
+
+ if (!IS_VALID_DMA_BUF_ACCESS_TYPE(type))
+ return -EINVAL;
+
+ if ((type & DMA_BUF_ACCESS_RW) == DMA_BUF_ACCESS_RW)
+ type &= ~DMA_BUF_ACCESS_R;
+
+ sobj = kzalloc(sizeof(*sobj), GFP_KERNEL);
+ if (!sobj) {
+ WARN_ON(1);
+ return -ENOMEM;
+ }
+
+ sobj->dmabuf = dmabuf;
+ sobj->robj = dmabuf->resv;
+
+ mutex_lock(&sync->lock);
+ list_add_tail(&sobj->head, &sync->syncs);
+ mutex_unlock(&sync->lock);
+
+ get_dma_buf(dmabuf);
+
+ sobj->access_type = type;
+
+ return 0;
+}
+
+/*
+ * dmabuf_sync_put_obj - Release a given sync object.
+ *
+ * @sync: An object to dmabuf_sync structure.
+ *
+ * This function should be called if some operation is failed after
+ * dmabuf_sync_get_obj call to release a given sync object.
+ */
+static void dmabuf_sync_put_obj(struct dmabuf_sync *sync,
+ struct dma_buf *dmabuf)
+{
+ struct dmabuf_sync_object *sobj;
+
+ mutex_lock(&sync->lock);
+
+ list_for_each_entry(sobj, &sync->syncs, head) {
+ if (sobj->dmabuf != dmabuf)
+ continue;
+
+ dma_buf_put(sobj->dmabuf);
+
+ list_del_init(&sobj->head);
+ kfree(sobj);
+ break;
+ }
+
+ if (list_empty(&sync->syncs))
+ sync->status = 0;
+
+ mutex_unlock(&sync->lock);
+}
+
+/*
+ * dmabuf_sync_put_objs - Release all sync objects of dmabuf_sync.
+ *
+ * @sync: An object to dmabuf_sync structure.
+ *
+ * This function should be called if some operation is failed after
+ * dmabuf_sync_get_obj call to release all sync objects.
+ */
+static void dmabuf_sync_put_objs(struct dmabuf_sync *sync)
+{
+ struct dmabuf_sync_object *sobj, *next;
+
+ mutex_lock(&sync->lock);
+
+ list_for_each_entry_safe(sobj, next, &sync->syncs, head) {
+ dma_buf_put(sobj->dmabuf);
+
+ list_del_init(&sobj->head);
+ kfree(sobj);
+ }
+
+ mutex_unlock(&sync->lock);
+
+ sync->status = 0;
+}
+
+/**
+ * dmabuf_sync_lock - lock all dmabufs added to syncs list.
+ *
+ * @sync: An object to dmabuf_sync structure.
+ *
+ * The caller should call this function prior to CPU or DMA access to
+ * the dmabufs so that others can not access the dmabufs.
+ * Internally, this function avoids dead lock issue with ww-mutex.
+ */
+int dmabuf_sync_lock(struct dmabuf_sync *sync)
+{
+ int ret;
+
+ if (!sync) {
+ WARN_ON(1);
+ return -EFAULT;
+ }
+
+ if (list_empty(&sync->syncs))
+ return -EINVAL;
+
+ if (sync->status != DMABUF_SYNC_GOT)
+ return -EINVAL;
+
+ ret = dmabuf_sync_lock_objs(sync, &sync->ctx);
+ if (ret < 0) {
+ WARN_ON(1);
+ return ret;
+ }
+
+ sync->status = DMABUF_SYNC_LOCKED;
+
+ return ret;
+}
+EXPORT_SYMBOL(dmabuf_sync_lock);
+
+/**
+ * dmabuf_sync_unlock - unlock all objects added to syncs list.
+ *
+ * @sync: An object to dmabuf_sync structure.
+ *
+ * The caller should call this function after CPU or DMA access to
+ * the dmabufs is completed so that others can access the dmabufs.
+ */
+int dmabuf_sync_unlock(struct dmabuf_sync *sync)
+{
+ if (!sync) {
+ WARN_ON(1);
+ return -EFAULT;
+ }
+
+ /* If current dmabuf sync object wasn't reserved then just return. */
+ if (sync->status != DMABUF_SYNC_LOCKED)
+ return -EAGAIN;
+
+ dmabuf_sync_unlock_objs(sync, &sync->ctx);
+
+ return 0;
+}
+EXPORT_SYMBOL(dmabuf_sync_unlock);
+
+/**
+ * dmabuf_sync_get - initialize reservation entry and update
+ * dmabuf sync.
+ *
+ * @sync: An object to dmabuf_sync structure.
+ * @sync_buf: A dma_buf object pointer that we want to be synchronized
+ * with others.
+ *
+ * This function should be called after dmabuf_sync_init function is called.
+ * The caller can group multiple dmabufs by calling this function several
+ * times. Internally, this function also takes a reference to a dmabuf.
+ */
+int dmabuf_sync_get(struct dmabuf_sync *sync, void *sync_buf, unsigned int type)
+{
+ int ret;
+
+ if (!sync || !sync_buf) {
+ WARN_ON(1);
+ return -EFAULT;
+ }
+
+ ret = dmabuf_sync_get_obj(sync, sync_buf, type);
+ if (ret < 0) {
+ WARN_ON(1);
+ return ret;
+ }
+
+ sync->status = DMABUF_SYNC_GOT;
+
+ return 0;
+}
+EXPORT_SYMBOL(dmabuf_sync_get);
+
+/**
+ * dmabuf_sync_put - Release a given dmabuf.
+ *
+ * @sync: An object to dmabuf_sync structure.
+ * @dmabuf: An object to dma_buf structure.
+ *
+ * This function should be called if some operation is failed after
+ * dmabuf_sync_get function is called to release the dmabuf, or
+ * dmabuf_sync_unlock function is called.
+ */
+void dmabuf_sync_put(struct dmabuf_sync *sync, struct dma_buf *dmabuf)
+{
+ if (!sync || !dmabuf) {
+ WARN_ON(1);
+ return;
+ }
+
+ if (list_empty(&sync->syncs))
+ return;
+
+ dmabuf_sync_put_obj(sync, dmabuf);
+}
+EXPORT_SYMBOL(dmabuf_sync_put);
+
+/**
+ * dmabuf_sync_put_all - Release all sync objects
+ *
+ * @sync: An object to dmabuf_sync structure.
+ *
+ * This function should be called if some operation is failed after
+ * dmabuf_sync_get function is called to release all sync objects, or
+ * dmabuf_sync_unlock function is called.
+ */
+void dmabuf_sync_put_all(struct dmabuf_sync *sync)
+{
+ if (!sync) {
+ WARN_ON(1);
+ return;
+ }
+
+ if (list_empty(&sync->syncs))
+ return;
+
+ dmabuf_sync_put_objs(sync);
+}
+EXPORT_SYMBOL(dmabuf_sync_put_all);
diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h
index 34cfbac..ae0c87b 100644
--- a/include/linux/dma-buf.h
+++ b/include/linux/dma-buf.h
@@ -150,6 +150,20 @@ struct dma_buf_attachment {
void *priv;
};
+#define DMA_BUF_ACCESS_R 0x1
+#define DMA_BUF_ACCESS_W 0x2
+#define DMA_BUF_ACCESS_DMA 0x4
+#define DMA_BUF_ACCESS_RW (DMA_BUF_ACCESS_R | DMA_BUF_ACCESS_W)
+#define DMA_BUF_ACCESS_DMA_R (DMA_BUF_ACCESS_R | DMA_BUF_ACCESS_DMA)
+#define DMA_BUF_ACCESS_DMA_W (DMA_BUF_ACCESS_W | DMA_BUF_ACCESS_DMA)
+#define DMA_BUF_ACCESS_DMA_RW (DMA_BUF_ACCESS_DMA_R | DMA_BUF_ACCESS_DMA_W)
+#define IS_VALID_DMA_BUF_ACCESS_TYPE(t) (t == DMA_BUF_ACCESS_R || \
+ t == DMA_BUF_ACCESS_W || \
+ t == DMA_BUF_ACCESS_DMA_R || \
+ t == DMA_BUF_ACCESS_DMA_W || \
+ t == DMA_BUF_ACCESS_RW || \
+ t == DMA_BUF_ACCESS_DMA_RW)
+
/**
* get_dma_buf - convenience wrapper for get_file.
* @dmabuf: [in] pointer to dma_buf
diff --git a/include/linux/dmabuf-sync.h b/include/linux/dmabuf-sync.h
new file mode 100644
index 0000000..44c37de
--- /dev/null
+++ b/include/linux/dmabuf-sync.h
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics Co.Ltd
+ * Authors:
+ * Inki Dae <inki.dae at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/dma-buf.h>
+#include <linux/reservation.h>
+
+enum dmabuf_sync_status {
+ DMABUF_SYNC_GOT = 1,
+ DMABUF_SYNC_LOCKED,
+};
+
+/*
+ * A structure for dmabuf_sync_object.
+ *
+ * @head: A list head to be added to syncs list.
+ * @robj: A reservation_object object.
+ * @dma_buf: A dma_buf object.
+ * @access_type: Indicate how a current task tries to access
+ * a given buffer.
+ */
+struct dmabuf_sync_object {
+ struct list_head head;
+ struct reservation_object *robj;
+ struct dma_buf *dmabuf;
+ unsigned int access_type;
+};
+
+/*
+ * A structure for dmabuf_sync.
+ *
+ * @syncs: A list head to sync object and this is global to system.
+ * @list: A list entry used as committed list node
+ * @lock: A mutex lock to current sync object.
+ * @ctx: A current context for ww mutex.
+ * @work: A work struct to release resources at timeout.
+ * @priv: A private data.
+ * @name: A string to dmabuf sync owner.
+ * @timer: A timer list to avoid lockup and release resources.
+ * @status: Indicate current status (DMABUF_SYNC_GOT or DMABUF_SYNC_LOCKED).
+ */
+struct dmabuf_sync {
+ struct list_head syncs;
+ struct list_head list;
+ struct mutex lock;
+ struct ww_acquire_ctx ctx;
+ struct work_struct work;
+ void *priv;
+ char name[64];
+ struct timer_list timer;
+ unsigned int status;
+};
+
+#ifdef CONFIG_DMABUF_SYNC
+extern bool is_dmabuf_sync_supported(void);
+
+extern struct dmabuf_sync *dmabuf_sync_init(void *priv, const char *name);
+
+extern void dmabuf_sync_fini(struct dmabuf_sync *sync);
+
+extern int dmabuf_sync_lock(struct dmabuf_sync *sync);
+
+extern int dmabuf_sync_unlock(struct dmabuf_sync *sync);
+
+extern int dmabuf_sync_get(struct dmabuf_sync *sync, void *sync_buf,
+ unsigned int type);
+
+extern void dmabuf_sync_put(struct dmabuf_sync *sync, struct dma_buf *dmabuf);
+
+extern void dmabuf_sync_put_all(struct dmabuf_sync *sync);
+
+#else
+static inline bool is_dmabuf_sync_supported(void) { return false; }
+
+static inline struct dmabuf_sync *dmabuf_sync_init(void *priv,
+ const char *names)
+{
+ return ERR_PTR(0);
+}
+
+static inline void dmabuf_sync_fini(struct dmabuf_sync *sync) { }
+
+static inline int dmabuf_sync_lock(struct dmabuf_sync *sync)
+{
+ return 0;
+}
+
+static inline int dmabuf_sync_unlock(struct dmabuf_sync *sync)
+{
+ return 0;
+}
+
+static inline int dmabuf_sync_get(struct dmabuf_sync *sync,
+ void *sync_buf,
+ unsigned int type)
+{
+ return 0;
+}
+
+static inline void dmabuf_sync_put(struct dmabuf_sync *sync,
+ struct dma_buf *dmabuf) { }
+
+static inline void dmabuf_sync_put_all(struct dmabuf_sync *sync) { }
+
+#endif
diff --git a/include/linux/reservation.h b/include/linux/reservation.h
index 80050e2..4310192 100644
--- a/include/linux/reservation.h
+++ b/include/linux/reservation.h
@@ -50,6 +50,11 @@ struct reservation_object {
struct fence *fence_excl;
struct fence **fence_shared;
u32 fence_shared_count, fence_shared_max;
+
+ atomic_t shared_cnt;
+ unsigned int accessed_type;
+ unsigned int shared;
+ unsigned int locked;
};
static inline void
@@ -60,6 +65,8 @@ reservation_object_init(struct reservation_object *obj)
obj->fence_shared_count = obj->fence_shared_max = 0;
obj->fence_shared = NULL;
obj->fence_excl = NULL;
+
+ atomic_set(&obj->shared_cnt, 1);
}
static inline void
--
1.7.5.4
More information about the linux-arm-kernel
mailing list