[PATCH v2 3/5] mfd: twl4030-power: Start transition to DT

[Florian Vaussard]

Support for loading twl4030-power module via devicetree.
For now, when booting with a DT, only the poweroff callback
feature is supported through the ti,use_poweroff property.

Signed-off-by: Florian Vaussard <florian.vaussard at epfl.ch>
---
 .../devicetree/bindings/mfd/twl4030-power.txt      |   28 ++++++++++++
 drivers/mfd/twl4030-power.c                        |   45 ++++++++++++++++---
 2 files changed, 66 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/twl4030-power.txt

diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
new file mode 100644
index 0000000..8e15ec3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
@@ -0,0 +1,28 @@
+Texas Instruments TWL family (twl4030) reset and power management module
+
+The power management module inside the TWL family provides several facilities
+to control the power resources, including power scripts. For now, the
+binding only supports the complete shutdown of the system after poweroff.
+
+Required properties:
+- compatible : must be "ti,twl4030-power"
+
+Optional properties:
+- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
+		   SLEEP-to-OFF transition when the system poweroffs.
+
+Example:
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl at 48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_power: power {
+			compatible = "ti,twl4030-power";
+			ti,use_poweroff;
+		};
+	};
+};
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 8fa6c7b..9f59c94 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -28,6 +28,7 @@
 #include <linux/pm.h>
 #include <linux/i2c/twl.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <asm/mach-types.h>
 
@@ -540,12 +541,30 @@ void twl4030_power_off(void)
 		pr_err("TWL4030 Unable to power off\n");
 }
 
+static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata,
+					struct device_node *node)
+{
+	if (pdata && pdata->use_poweroff)
+		return true;
+
+	if (of_property_read_bool(node, "ti,use_poweroff"))
+		return true;
+
+	return false;
+}
+
 int twl4030_power_probe(struct platform_device *pdev)
 {
 	struct twl4030_power_data *pdata = pdev->dev.platform_data;
+	struct device_node *node = pdev->dev.of_node;
 	int err = 0;
 	u8 val;
 
+	if (!pdata && !node) {
+		dev_err(&pdev->dev, "Platform data is missing\n");
+		return -EINVAL;
+	}
+
 	err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
 			       TWL4030_PM_MASTER_PROTECT_KEY);
 	if (err)
@@ -556,15 +575,18 @@ int twl4030_power_probe(struct platform_device *pdev)
 	if (err)
 		goto unlock;
 
-	err = twl4030_power_configure_scripts(pdata);
-	if (err)
-		goto load;
-	err = twl4030_power_configure_resources(pdata);
-	if (err)
-		goto resource;
+	if (pdata) {
+		/* TODO: convert to device tree */
+		err = twl4030_power_configure_scripts(pdata);
+		if (err)
+			goto load;
+		err = twl4030_power_configure_resources(pdata);
+		if (err)
+			goto resource;
+	}
 
 	/* Board has to be wired properly to use this feature */
-	if (pdata->use_poweroff && !pm_power_off) {
+	if (twl4030_power_use_poweroff(pdata, node) && !pm_power_off) {
 		/* Default for SEQ_OFFSYNC is set, lets ensure this */
 		err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val,
 				      TWL4030_PM_MASTER_CFG_P123_TRANSITION);
@@ -610,10 +632,19 @@ static int twl4030_power_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id twl4030_power_of_match[] = {
+	{.compatible = "ti,twl4030-power", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, twl4030_power_of_match);
+#endif
+
 static struct platform_driver twl4030_power_driver = {
 	.driver = {
 		.name	= "twl4030_power",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(twl4030_power_of_match),
 	},
 	.probe		= twl4030_power_probe,
 	.remove		= twl4030_power_remove,
-- 
1.7.5.4