[PATCH v10 1/2] ARM: davinci: move private EDMA API to arm/common

Fernandes, Joel A joelagnel at ti.com
Mon Jun 17 13:55:42 EDT 2013


Hi Olof,

> -----Original Message-----
> From: Olof Johansson [mailto:olof at lixom.net]
> Sent: Monday, June 17, 2013 12:03 PM
> To: Nori, Sekhar
> Cc: Russell King; Vinod Koul; Chris Ball; Liam Girdwood; Mark Brown; Kevin
> Hilman; Matt Porter; Fernandes, Joel A; linux-arm-kernel at lists.infradead.org;
> davinci-linux-open-source at linux.davincidsp.com; linux-mmc at vger.kernel.org;
> alsa-devel at alsa-project.org; Arnd Bergmann
> Subject: Re: [PATCH v10 1/2] ARM: davinci: move private EDMA API to
> arm/common
> 
> On Mon, Jun 17, 2013 at 03:36:10PM +0530, Sekhar Nori wrote:
> > From: Matt Porter <mporter at ti.com>
> >
> > Move mach-davinci/dma.c to common/edma.c so it can be used by OMAP
> > (specifically AM33xx) as well.
> >
> > Signed-off-by: Matt Porter <mporter at ti.com>
> > Acked-by: Chris Ball <cjb at laptop.org> # davinci_mmc.c
> > [nsekhar at ti.com: dropped davinci sffsdr changes]
> > Signed-off-by: Sekhar Nori <nsekhar at ti.com>
> 
> Acked-by: Olof Johansson <olof at lixom.net>
> 
> Tiny nit below, no need to respin just for that.
> 
> I suppose we should take this through arm-soc.
> 
> > ---
> >  arch/arm/Kconfig                                   |    1 +
> >  arch/arm/common/Kconfig                            |    3 +
> >  arch/arm/common/Makefile                           |    1 +
> >  arch/arm/{mach-davinci/dma.c => common/edma.c}     |    2 +-
> >  arch/arm/mach-davinci/Makefile                     |    2 +-
> >  arch/arm/mach-davinci/board-tnetv107x-evm.c        |    2 +-
> >  arch/arm/mach-davinci/davinci.h                    |    2 +-
> >  arch/arm/mach-davinci/devices-tnetv107x.c          |    2 +-
> >  arch/arm/mach-davinci/devices.c                    |    6 +-
> >  arch/arm/mach-davinci/dm355.c                      |    2 +-
> >  arch/arm/mach-davinci/dm365.c                      |    2 +-
> >  arch/arm/mach-davinci/dm644x.c                     |    2 +-
> >  arch/arm/mach-davinci/dm646x.c                     |    2 +-
> >  arch/arm/mach-davinci/include/mach/da8xx.h         |    2 +-
> >  drivers/dma/edma.c                                 |    2 +-
> >  drivers/mmc/host/davinci_mmc.c                     |    1 +
> >  include/linux/mfd/davinci_voicecodec.h             |    3 +-
> >  .../mach => include/linux/platform_data}/edma.h    |   89 +-------------------
> >  include/linux/platform_data/spi-davinci.h          |    2 +-
> >  sound/soc/davinci/davinci-evm.c                    |    1 +
> >  sound/soc/davinci/davinci-pcm.c                    |    1 +
> >  sound/soc/davinci/davinci-pcm.h                    |    2 +-
> >  22 files changed, 29 insertions(+), 103 deletions(-)  rename
> > arch/arm/{mach-davinci/dma.c => common/edma.c} (99%)  rename
> > {arch/arm/mach-davinci/include/mach =>
> > include/linux/platform_data}/edma.h (59%)
> >
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index
> > 49d993c..b1c66a4 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -840,6 +840,7 @@ config ARCH_DAVINCI
> >  	select GENERIC_IRQ_CHIP
> >  	select HAVE_IDE
> >  	select NEED_MACH_GPIO_H
> > +	select TI_PRIV_EDMA
> 
> What does PRIV here mean? Privileged? Private? I think it can be shortened to
> TI_EDMA.
> 
 [Joel] TI_EDMA already exists. It is used to build drivers/dma/edma.
I have a patch that reuses the TI_EDMA option instead of the PRIV one . I will
include that In my v11 series for EDMA (v10 was just posted) . If its ok, let us
merge Sekhar's patch as-is, and then mine will get rid of the PRIV option
(among other things).

Thanks,
Joel



More information about the linux-arm-kernel mailing list