[PATCH v5 3/7] clk: samsung: Add support to register rate_table for PLL3xxx
Yadwinder Singh Brar
yadi.brar at samsung.com
Sat Jun 8 13:34:18 EDT 2013
This patch defines a common rate_table which will contain recommended p, m, s,
k values for supported rates that needs to be changed for changing
corresponding PLL's rate.
Reviewed-by: Doug Anderson <dianders at chromium.org>
Signed-off-by: Yadwinder Singh Brar <yadi.brar at samsung.com>
---
drivers/clk/samsung/clk-exynos4.c | 8 ++++----
drivers/clk/samsung/clk-exynos5250.c | 14 +++++++-------
drivers/clk/samsung/clk-pll.c | 22 ++++++++++++++++++++--
drivers/clk/samsung/clk-pll.h | 27 +++++++++++++++++++++++++++
drivers/clk/samsung/clk.h | 14 +++++++++-----
5 files changed, 67 insertions(+), 18 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index ba25a1b..ceee66c 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -997,13 +997,13 @@ static __initdata struct of_device_id ext_clk_match[] = {
struct __initdata samsung_pll_clock exynos4_plls[nr_plls] = {
[apll] = PLL_A(pll_35xx, fout_apll, "fout_apll", "fin_pll", APLL_LOCK,
- APLL_CON0, "fout_apll"),
+ APLL_CON0, "fout_apll", NULL),
[mpll] = PLL_A(pll_35xx, fout_mpll, "fout_mpll", "fin_pll",
- E4X12_MPLL_LOCK, E4X12_MPLL_CON0, "fout_mpll"),
+ E4X12_MPLL_LOCK, E4X12_MPLL_CON0, "fout_mpll", NULL),
[epll] = PLL_A(pll_36xx, fout_epll, "fout_epll", "fin_pll", EPLL_LOCK,
- EPLL_CON0, "fout_epll"),
+ EPLL_CON0, "fout_epll", NULL),
[vpll] = PLL_A(pll_36xx, fout_vpll, "fout_vpll", "fin_pll", VPLL_LOCK,
- VPLL_CON0, "fout_vpll"),
+ VPLL_CON0, "fout_vpll", NULL),
};
/* register exynos4 clocks */
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index 0418cc1..a025269 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -491,19 +491,19 @@ static __initdata struct of_device_id ext_clk_match[] = {
struct __initdata samsung_pll_clock exynos5250_plls[nr_plls] = {
[apll] = PLL_A(pll_35xx, fout_apll, "fout_apll", "fin_pll", APLL_LOCK,
- APLL_CON0, "fout_apll"),
+ APLL_CON0, "fout_apll", NULL),
[mpll] = PLL_A(pll_35xx, fout_mpll, "fout_mpll", "fin_pll", MPLL_LOCK,
- MPLL_CON0, "fout_mpll"),
+ MPLL_CON0, "fout_mpll", NULL),
[bpll] = PLL(pll_35xx, fout_bpll, "fout_bpll", "fin_pll", BPLL_LOCK,
- BPLL_CON0),
+ BPLL_CON0, NULL),
[gpll] = PLL(pll_35xx, fout_gpll, "fout_gpll", "fin_pll", GPLL_LOCK,
- GPLL_CON0),
+ GPLL_CON0, NULL),
[cpll] = PLL(pll_35xx, fout_cpll, "fout_cpll", "fin_pll", CPLL_LOCK,
- CPLL_CON0),
+ CPLL_CON0, NULL),
[epll] = PLL(pll_36xx, fout_epll, "fout_epll", "fin_pll", EPLL_LOCK,
- EPLL_CON0),
+ EPLL_CON0, NULL),
[vpll] = PLL(pll_36xx, fout_vpll, "fout_vpll", "fin_pll", VPLL_LOCK,
- VPLL_CON0),
+ VPLL_CON0, NULL),
};
/* register exynox5250 clocks */
diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index b83900c..f753c5e 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -18,6 +18,8 @@ struct samsung_clk_pll {
void __iomem *lock_reg;
void __iomem *con_reg;
enum samsung_pll_type type;
+ unsigned int rate_count;
+ const struct samsung_pll_rate_table *rate_table;
};
#define to_clk_pll(_hw) container_of(_hw, struct samsung_clk_pll, hw)
@@ -350,7 +352,7 @@ void __init samsung_clk_register_pll(struct samsung_pll_clock *clk_list,
struct clk *clk;
struct clk_init_data init;
struct samsung_pll_clock *list = clk_list;
- int cnt;
+ int cnt, len;
for (cnt = 0; cnt < nr_pll; cnt++, list++) {
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
@@ -365,6 +367,21 @@ void __init samsung_clk_register_pll(struct samsung_pll_clock *clk_list,
init.parent_names = &list->parent_name;
init.num_parents = 1;
+ if (list->rate_table) {
+ /* find count of rates in rate_table */
+ for (len = 0; list->rate_table[len].rate != 0; )
+ len++;
+
+ pll->rate_count = len;
+ pll->rate_table = kmemdup(list->rate_table,
+ list->rate_count *
+ sizeof(struct samsung_pll_rate_table),
+ GFP_KERNEL);
+ WARN(!pll->rate_table,
+ "%s: could not allocate rate table for %s\n",
+ __func__, list->name);
+ }
+
switch (list->type) {
case pll_35xx:
init.ops = &samsung_pll35xx_clk_ops;
@@ -392,10 +409,11 @@ void __init samsung_clk_register_pll(struct samsung_pll_clock *clk_list,
samsung_clk_add_lookup(clk, list->id);
- if (list->alias)
+ if (list->alias) {
if (clk_register_clkdev(clk, list->alias,
list->dev_name))
pr_err("%s: failed to register lookup for %s",
__func__, list->name);
+ }
}
}
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index 58810fe..fb42252 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -17,6 +17,33 @@ enum samsung_pll_type {
pll_36xx,
};
+#define PLL_35XX_RATE(_rate, _m, _p, _s) \
+ { \
+ .rate = (_rate), \
+ .mdiv = (_m), \
+ .pdiv = (_p), \
+ .sdiv = (_s), \
+ }
+
+#define PLL_36XX_RATE(_rate, _m, _p, _s, _k) \
+ { \
+ .rate = (_rate), \
+ .mdiv = (_m), \
+ .pdiv = (_p), \
+ .sdiv = (_s), \
+ .kdiv = (_k), \
+ }
+
+/* NOTE: Rate table should be kept sorted in descending order. */
+
+struct samsung_pll_rate_table {
+ unsigned int rate;
+ unsigned int pdiv;
+ unsigned int mdiv;
+ unsigned int sdiv;
+ unsigned int kdiv;
+};
+
enum pll45xx_type {
pll_4500,
pll_4502,
diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h
index 51f60ca..3e6501c 100644
--- a/drivers/clk/samsung/clk.h
+++ b/drivers/clk/samsung/clk.h
@@ -280,10 +280,13 @@ struct samsung_pll_clock {
const int con_offset;
const int lock_offset;
enum samsung_pll_type type;
+ const struct samsung_pll_rate_table *rate_table;
+ unsigned int rate_count;
const char *alias;
};
-#define __PLL(_typ, _id, _dname, _name, _pname, _flags, _lock, _con, _alias) \
+#define __PLL(_typ, _id, _dname, _name, _pname, _flags, _lock, _con, \
+ _rtable, _alias) \
{ \
.id = _id, \
.type = _typ, \
@@ -293,16 +296,17 @@ struct samsung_pll_clock {
.flags = CLK_GET_RATE_NOCACHE, \
.con_offset = _con, \
.lock_offset = _lock, \
+ .rate_table = _rtable, \
.alias = _alias, \
}
-#define PLL(_typ, _id, _name, _pname, _lock, _con) \
+#define PLL(_typ, _id, _name, _pname, _lock, _con, _rtable) \
__PLL(_typ, _id, NULL, _name, _pname, CLK_GET_RATE_NOCACHE, \
- _lock, _con, NULL)
+ _lock, _con, _rtable, _name)
-#define PLL_A(_typ, _id, _name, _pname, _lock, _con, _alias) \
+#define PLL_A(_typ, _id, _name, _pname, _lock, _con, _alias, _rtable) \
__PLL(_typ, _id, NULL, _name, _pname, CLK_GET_RATE_NOCACHE, \
- _lock, _con, _alias)
+ _lock, _con, _rtable, _alias)
extern void __init samsung_clk_init(struct device_node *np, void __iomem *base,
unsigned long nr_clks, unsigned long *rdump,
--
1.7.0.4
More information about the linux-arm-kernel
mailing list