[PATCH] ARM: mm: cpu_fa526_do_idle: remove WFI

[Jonas Jensen]

As it was already suggested by Russell King and Arnd Bergmann ( https://lkml.org/lkml/2013/5/16/133 ), moxart and gemini seem to be the only platforms using CPU_FA526, and instead of pointing arm_pm_idle to an empty function from platform code, it makes sense to remove WFI code from the processor specific idle function.

Note: moxart boots and prints to UART without this patch, but input is broken.

Signed-off-by: Jonas Jensen <jonas.jensen at gmail.com>
---
 arch/arm/mm/proc-fa526.S |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
index d217e97..85280b1 100644
--- a/arch/arm/mm/proc-fa526.S
+++ b/arch/arm/mm/proc-fa526.S
@@ -81,9 +81,7 @@ ENDPROC(cpu_fa526_reset)
  */
 	.align	4
 ENTRY(cpu_fa526_do_idle)
-	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
-	mov	pc, lr
-
+	nop
 
 ENTRY(cpu_fa526_dcache_clean_area)
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-- 
1.7.2.5