[PATCH 27/28] ARM: EXYNOS: Remove CONFIG_SOC_EXYNOS4412

Sat Jun 15 10:06:25 EDT 2013

Tomasz,

On 14-06-2013 15:33, Tomasz Figa wrote:
> Exynos4212 and Exynos4412 SoCs differ only in number of ARM cores and
> there is no need to have separate Kconfig options for them, since they
> use the same code.
> 
> This patch removes CONFIG_SOC_EXYNOS4412, leaving CONFIG_SOC_EXYNOS4212
> as the one supporting both SoCs from this series.
> 
> Cc: "Rafael J. Wysocki" <rjw at sisk.pl>
> Cc: Viresh Kumar <viresh.kumar at linaro.org>
> Cc: Mauro Carvalho Chehab <mchehab at redhat.com>
> Cc: Zhang Rui <rui.zhang at intel.com>
> Cc: Eduardo Valentin <eduardo.valentin at ti.com>
> Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
> Cc: cpufreq at vger.kernel.org
> Cc: linux-pm at vger.kernel.org
> Cc: linux-media at vger.kernel.org
> Cc: linux-serial at vger.kernel.org
> Signed-off-by: Tomasz Figa <t.figa at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
>  arch/arm/mach-exynos/Kconfig              | 11 +----------
>  arch/arm/plat-samsung/include/plat/cpu.h  |  6 +-----
>  drivers/cpufreq/Kconfig.arm               |  2 +-
>  drivers/media/platform/exynos4-is/Kconfig |  2 +-
>  drivers/thermal/exynos_thermal.c          |  2 +-
>  drivers/tty/serial/samsung.c              |  3 +--
>  6 files changed, 6 insertions(+), 20 deletions(-)

Not for the matter of the change itself, but just for simplicity while
merging when the change is agreed to be good, it is recommended that you
split your changes in different smaller patches, specially because you
are touching several parts of the kernel that belong to different trees.
If one merges your change the way it is, it is likely to create merge
conflicts.

> 
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index 47d8d9e..fe75a65 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -46,7 +46,7 @@ config CPU_EXYNOS4210
>  	  Enable EXYNOS4210 CPU support
>  
>  config SOC_EXYNOS4212
> -	bool "SAMSUNG EXYNOS4212"
> +	bool "SAMSUNG EXYNOS4212/4412"
>  	default y
>  	depends on ARCH_EXYNOS4
>  	select PINCTRL_EXYNOS
> @@ -56,15 +56,6 @@ config SOC_EXYNOS4212
>  	help
>  	  Enable EXYNOS4212 SoC support
>  
> -config SOC_EXYNOS4412
> -	bool "SAMSUNG EXYNOS4412"
> -	default y
> -	depends on ARCH_EXYNOS4
> -	select PINCTRL_EXYNOS
> -	select SAMSUNG_DMADEV
> -	help
> -	  Enable EXYNOS4412 SoC support
> -
>  config SOC_EXYNOS5250
>  	bool "SAMSUNG EXYNOS5250"
>  	default y
> diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
> index 989fefe..87b03bb 100644
> --- a/arch/arm/plat-samsung/include/plat/cpu.h
> +++ b/arch/arm/plat-samsung/include/plat/cpu.h
> @@ -122,13 +122,9 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
>  
>  #if defined(CONFIG_SOC_EXYNOS4212)
>  # define soc_is_exynos4212()	is_samsung_exynos4212()
> -#else
> -# define soc_is_exynos4212()	0
> -#endif
> -
> -#if defined(CONFIG_SOC_EXYNOS4412)
>  # define soc_is_exynos4412()	is_samsung_exynos4412()
>  #else
> +# define soc_is_exynos4212()	0
>  # define soc_is_exynos4412()	0
>  #endif
>  
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index a924408..b214ad6 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -32,7 +32,7 @@ config ARM_EXYNOS4210_CPUFREQ
>  	  SoC (S5PV310 or S5PC210).
>  
>  config ARM_EXYNOS4X12_CPUFREQ
> -	def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
> +	def_bool SOC_EXYNOS4212
>  	help
>  	  This adds the CPUFreq driver for Samsung EXYNOS4X12
>  	  SoC (EXYNOS4212 or EXYNOS4412).
> diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
> index 6ff99b5..f483e11 100644
> --- a/drivers/media/platform/exynos4-is/Kconfig
> +++ b/drivers/media/platform/exynos4-is/Kconfig
> @@ -32,7 +32,7 @@ config VIDEO_S5P_MIPI_CSIS
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called s5p-csis.
>  
> -if SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250
> +if SOC_EXYNOS4212 || SOC_EXYNOS5250
>  
>  config VIDEO_EXYNOS_FIMC_LITE
>  	tristate "EXYNOS FIMC-LITE camera interface driver"
> diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
> index 788b1dd..f88a2ad 100644
> --- a/drivers/thermal/exynos_thermal.c
> +++ b/drivers/thermal/exynos_thermal.c
> @@ -817,7 +817,7 @@ static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
>  #define EXYNOS4210_TMU_DRV_DATA (NULL)
>  #endif
>  
> -#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
> +#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4212)
>  static struct exynos_tmu_platform_data const exynos_default_tmu_data = {
>  	.threshold_falling = 10,
>  	.trigger_levels[0] = 85,
> diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
> index 0c8a9fa..eeb8ecb 100644
> --- a/drivers/tty/serial/samsung.c
> +++ b/drivers/tty/serial/samsung.c
> @@ -1714,8 +1714,7 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
>  #endif
>  
>  #if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) || \
> -	defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) || \
> -	defined(CONFIG_SOC_EXYNOS5440)
> +	defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS5440)
>  static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
>  	.info = &(struct s3c24xx_uart_info) {
>  		.name		= "Samsung Exynos4 UART",
> 

-- 
You have got to be excited about what you are doing. (L. Lamport)

Eduardo Valentin

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 295 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130615/fd793c17/attachment.sig>