[PATCH 00/28] Twenty eight patches big Exynos cleanup
Kukjin Kim
kgene.kim at samsung.com
Fri Jun 14 22:30:52 EDT 2013
Tomasz Figa wrote:
>
> Hi All,
>
> As I promised, I am doing some spring (or rather summer) cleaning
> of Exynos- and Samsung- related code.
>
> This first part consists mostly of removing dead code remaining after
> removal of ATAGS support for Exynos, but several patches cleans up
> other things found by the way.
>
> See particular patches for more detailed description.
>
> On Exynos4210-based Trats board:
> Tested-by: Tomasz Figa <t.figa at samsung.com>
>
> Build tested every patch with s3c6400_defconfig, s5pv210_defconfig
> and exynos_defconfig.
>
> Tomasz Figa (28):
> ARM: EXYNOS: Remove unused board files
> ARM: EXYNOS: Make ARCH_EXYNOS select USE_OF
> ARM: SAMSUNG: Introduce SAMSUNG_ATAGS Kconfig entry
> ARM: EXYNOS: common: Remove legacy PMU initialization code
> ARM: EXYNOS: common: Remove legacy EINT initialization code
> ARM: EXYNOS: common: Remove legacy UART initialization code
> ARM: EXYNOS: Remove legacy dev- and setup- files
> ARM: EXYNOS: common: Remove legacy interrupt initialization code
> ARM: EXYNOS: common: Remove legacy timer initialization code
> ARM: EXYNOS: common: Remove platform device initialization
> ARM: EXYNOS: common: Remove legacy mapping of chip ID block
> ARM: EXYNOS: firmware: Remove check for device tree presence
> ARM: EXYNOS: pm_domains: Remove legacy power domain registration code
> ARM: SAMSUNG: Introduce GPIO_SAMSUNG Kconfig entry
> ARM: EXYNOS: Provide compatibility stubs for PM code in pm-core.h
> header
> ARM: SAMSUNG: Compile s5p-irq-pm only with ATAGS support
> ARM: EXYNOS: Decouple ARCH_EXYNOS from PLAT_S5P
> ARM: SAMSUNG: pm: Include most of mach/ headers conditionally
> ARM: EXYNOS: Do not select legacy Kconfig symbols any more
> ARM: EXYNOS: Remove setup-i2c0.c
> ARM: EXYNOS: Remove mach/gpio.h
> ARM: EXYNOS: Remove mach/regs-gpio.h header
> ARM: SAMSUNG: Make legacy MFC support code depend on SAMSUNG_ATAGS
> ARM: EXYNOS: Select SPARSE_IRQ for Exynos
> ARM: EXYNOS: Remove mach/irqs.h header
> ARM: EXYNOS: Remove unused base addresses from mach/map.h header
> ARM: EXYNOS: Remove CONFIG_SOC_EXYNOS4412
> ARM: EXYNOS: Remove mach/regs-usb-phy.h header
>
> arch/arm/Kconfig | 15 +-
> arch/arm/Makefile | 1 +
> arch/arm/mach-exynos/Kconfig | 14 +-
> arch/arm/mach-exynos/Makefile | 6 -
> arch/arm/mach-exynos/common.c | 472 +-------
> arch/arm/mach-exynos/dev-audio.c | 254 ----
> arch/arm/mach-exynos/dev-uart.c | 55 -
> arch/arm/mach-exynos/firmware.c | 22 +-
> arch/arm/mach-exynos/include/mach/gpio.h | 289 -----
> arch/arm/mach-exynos/include/mach/irqs.h | 476 --------
> arch/arm/mach-exynos/include/mach/map.h | 214 ----
> arch/arm/mach-exynos/include/mach/pm-core.h | 5 +
> arch/arm/mach-exynos/include/mach/regs-gpio.h | 40 -
> arch/arm/mach-exynos/include/mach/regs-usb-phy.h | 74 --
> arch/arm/mach-exynos/mach-armlex4210.c | 207 ----
> arch/arm/mach-exynos/mach-nuri.c | 1388
---------------------
> -
> arch/arm/mach-exynos/mach-origen.c | 823 -------------
> arch/arm/mach-exynos/mach-smdk4x12.c | 396 ------
> arch/arm/mach-exynos/mach-smdkv310.c | 444 -------
> arch/arm/mach-exynos/mach-universal_c210.c | 1159
------------------
> arch/arm/mach-exynos/pm.c | 1 -
> arch/arm/mach-exynos/pm_domains.c | 94 +-
> arch/arm/mach-exynos/setup-fimc.c | 44 -
> arch/arm/mach-exynos/setup-fimd0.c | 43 -
> arch/arm/mach-exynos/setup-i2c0.c | 29 -
> arch/arm/mach-exynos/setup-i2c1.c | 23 -
> arch/arm/mach-exynos/setup-i2c2.c | 23 -
> arch/arm/mach-exynos/setup-i2c3.c | 23 -
> arch/arm/mach-exynos/setup-i2c4.c | 23 -
> arch/arm/mach-exynos/setup-i2c5.c | 23 -
> arch/arm/mach-exynos/setup-i2c6.c | 23 -
> arch/arm/mach-exynos/setup-i2c7.c | 23 -
> arch/arm/mach-exynos/setup-keypad.c | 36 -
> arch/arm/mach-exynos/setup-sdhci-gpio.c | 152 ---
> arch/arm/mach-exynos/setup-spi.c | 45 -
> arch/arm/mach-exynos/setup-usb-phy.c | 223 ----
> arch/arm/plat-samsung/Kconfig | 40 +-
> arch/arm/plat-samsung/Makefile | 11 +-
> arch/arm/plat-samsung/include/plat/cpu.h | 6 +-
> arch/arm/plat-samsung/include/plat/pm.h | 5 +
> arch/arm/plat-samsung/init.c | 8 +-
> arch/arm/plat-samsung/pm-gpio.c | 5 +-
> arch/arm/plat-samsung/pm.c | 8 +-
> arch/arm/plat-samsung/s5p-dev-mfc.c | 11 +-
> drivers/cpufreq/Kconfig.arm | 2 +-
> drivers/gpio/Kconfig | 7 +
> drivers/gpio/Makefile | 2 +-
> drivers/media/platform/exynos4-is/Kconfig | 2 +-
> drivers/thermal/exynos_thermal.c | 2 +-
> drivers/tty/serial/samsung.c | 3 +-
> 50 files changed, 115 insertions(+), 7179 deletions(-)
> delete mode 100644 arch/arm/mach-exynos/dev-audio.c
> delete mode 100644 arch/arm/mach-exynos/dev-uart.c
> delete mode 100644 arch/arm/mach-exynos/include/mach/gpio.h
> delete mode 100644 arch/arm/mach-exynos/include/mach/irqs.h
> delete mode 100644 arch/arm/mach-exynos/include/mach/regs-gpio.h
> delete mode 100644 arch/arm/mach-exynos/include/mach/regs-usb-phy.h
> delete mode 100644 arch/arm/mach-exynos/mach-armlex4210.c
> delete mode 100644 arch/arm/mach-exynos/mach-nuri.c
> delete mode 100644 arch/arm/mach-exynos/mach-origen.c
> delete mode 100644 arch/arm/mach-exynos/mach-smdk4x12.c
> delete mode 100644 arch/arm/mach-exynos/mach-smdkv310.c
> delete mode 100644 arch/arm/mach-exynos/mach-universal_c210.c
> delete mode 100644 arch/arm/mach-exynos/setup-fimc.c
> delete mode 100644 arch/arm/mach-exynos/setup-fimd0.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c0.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c1.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c2.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c3.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c4.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c5.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c6.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c7.c
> delete mode 100644 arch/arm/mach-exynos/setup-keypad.c
> delete mode 100644 arch/arm/mach-exynos/setup-sdhci-gpio.c
> delete mode 100644 arch/arm/mach-exynos/setup-spi.c
> delete mode 100644 arch/arm/mach-exynos/setup-usb-phy.c
>
> --
> 1.8.2.1
Basically, looks good. I'm looking at this series then let me take.
BTW, just note, happens build error with s5pc100_defconfig....
arch/arm/plat-samsung/pm-gpio.c: In function 'samsung_gpio_pm_1bit_save':
arch/arm/plat-samsung/pm-gpio.c:33:6: error: 'struct samsung_gpio_chip' has
no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:34:6: error: 'struct samsung_gpio_chip' has
no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c: In function 'samsung_gpio_pm_1bit_resume':
arch/arm/plat-samsung/pm-gpio.c:42:22: error: 'struct samsung_gpio_chip' has
no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:43:22: error: 'struct samsung_gpio_chip' has
no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c: At top level:
arch/arm/plat-samsung/pm-gpio.c:63:24: error: expected identifier or '('
before 'void'
arch/arm/plat-samsung/pm-gpio.c:63:24: error: expected ')' before numeric
constant
arch/arm/plat-samsung/pm-gpio.c: In function 'samsung_gpio_pm_2bit_save':
arch/arm/plat-samsung/pm-gpio.c:70:6: error: 'struct samsung_gpio_chip' has
no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:71:6: error: 'struct samsung_gpio_chip' has
no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:72:6: error: 'struct samsung_gpio_chip' has
no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c: In function 'samsung_gpio_pm_2bit_resume':
arch/arm/plat-samsung/pm-gpio.c:129:22: error: 'struct samsung_gpio_chip'
has no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:130:22: error: 'struct samsung_gpio_chip'
has no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:136:19: error: 'struct samsung_gpio_chip'
has no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c: At top level:
arch/arm/plat-samsung/pm-gpio.c:190:24: error: expected identifier or '('
before 'void'
arch/arm/plat-samsung/pm-gpio.c:190:24: error: expected ')' before numeric
constant
arch/arm/plat-samsung/pm-gpio.c: In function 'samsung_gpio_pm_4bit_save':
arch/arm/plat-samsung/pm-gpio.c:199:6: error: 'struct samsung_gpio_chip' has
no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:200:6: error: 'struct samsung_gpio_chip' has
no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:201:6: error: 'struct samsung_gpio_chip' has
no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:204:7: error: 'struct samsung_gpio_chip' has
no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c: In function 'samsung_gpio_pm_4bit_con':
arch/arm/plat-samsung/pm-gpio.c:250:22: error: 'struct samsung_gpio_chip'
has no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c: In function 'samsung_gpio_pm_4bit_resume':
arch/arm/plat-samsung/pm-gpio.c:266:22: error: 'struct samsung_gpio_chip'
has no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:281:19: error: 'struct samsung_gpio_chip'
has no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:282:19: error: 'struct samsung_gpio_chip'
has no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:284:20: error: 'struct samsung_gpio_chip'
has no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:286:19: error: 'struct samsung_gpio_chip'
has no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:287:19: error: 'struct samsung_gpio_chip'
has no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c: At top level:
arch/arm/plat-samsung/pm-gpio.c:302:24: error: expected identifier or '('
before 'void'
arch/arm/plat-samsung/pm-gpio.c:302:24: error: expected ')' before numeric
constant
arch/arm/plat-samsung/pm-gpio.c: In function 'samsung_pm_save_gpios':
arch/arm/plat-samsung/pm-gpio.c:342:3: error: 'struct samsung_gpio_chip' has
no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:342:3: error: 'struct samsung_gpio_chip' has
no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:342:3: error: 'struct samsung_gpio_chip' has
no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c:342:3: error: 'struct samsung_gpio_chip' has
no member named 'pm_save'
arch/arm/plat-samsung/pm-gpio.c: At top level:
arch/arm/plat-samsung/pm-gpio.c:31:13: warning: 'samsung_gpio_pm_1bit_save'
defined but not used [-Wunused-function]
arch/arm/plat-samsung/pm-gpio.c:37:13: warning:
'samsung_gpio_pm_1bit_resume' defined but not used [-Wunused-function]
arch/arm/plat-samsung/pm-gpio.c:68:13: warning: 'samsung_gpio_pm_2bit_save'
defined but not used [-Wunused-function]
arch/arm/plat-samsung/pm-gpio.c:124:13: warning:
'samsung_gpio_pm_2bit_resume' defined but not used [-Wunused-function]
arch/arm/plat-samsung/pm-gpio.c:197:13: warning: 'samsung_gpio_pm_4bit_save'
defined but not used [-Wunused-function]
arch/arm/plat-samsung/pm-gpio.c:261:13: warning:
'samsung_gpio_pm_4bit_resume' defined but not used [-Wunused-function]
make[2]: *** [arch/arm/plat-samsung/pm-gpio.o] Error 1
make[2]: *** Waiting for unfinished jobs....
- Kukjin
More information about the linux-arm-kernel
mailing list