[PATCH 00/28] Twenty eight patches big Exynos cleanup
Tomasz Figa
t.figa at samsung.com
Fri Jun 14 15:32:36 EDT 2013
Hi All,
As I promised, I am doing some spring (or rather summer) cleaning
of Exynos- and Samsung- related code.
This first part consists mostly of removing dead code remaining after
removal of ATAGS support for Exynos, but several patches cleans up
other things found by the way.
See particular patches for more detailed description.
On Exynos4210-based Trats board:
Tested-by: Tomasz Figa <t.figa at samsung.com>
Build tested every patch with s3c6400_defconfig, s5pv210_defconfig
and exynos_defconfig.
Tomasz Figa (28):
ARM: EXYNOS: Remove unused board files
ARM: EXYNOS: Make ARCH_EXYNOS select USE_OF
ARM: SAMSUNG: Introduce SAMSUNG_ATAGS Kconfig entry
ARM: EXYNOS: common: Remove legacy PMU initialization code
ARM: EXYNOS: common: Remove legacy EINT initialization code
ARM: EXYNOS: common: Remove legacy UART initialization code
ARM: EXYNOS: Remove legacy dev- and setup- files
ARM: EXYNOS: common: Remove legacy interrupt initialization code
ARM: EXYNOS: common: Remove legacy timer initialization code
ARM: EXYNOS: common: Remove platform device initialization
ARM: EXYNOS: common: Remove legacy mapping of chip ID block
ARM: EXYNOS: firmware: Remove check for device tree presence
ARM: EXYNOS: pm_domains: Remove legacy power domain registration code
ARM: SAMSUNG: Introduce GPIO_SAMSUNG Kconfig entry
ARM: EXYNOS: Provide compatibility stubs for PM code in pm-core.h
header
ARM: SAMSUNG: Compile s5p-irq-pm only with ATAGS support
ARM: EXYNOS: Decouple ARCH_EXYNOS from PLAT_S5P
ARM: SAMSUNG: pm: Include most of mach/ headers conditionally
ARM: EXYNOS: Do not select legacy Kconfig symbols any more
ARM: EXYNOS: Remove setup-i2c0.c
ARM: EXYNOS: Remove mach/gpio.h
ARM: EXYNOS: Remove mach/regs-gpio.h header
ARM: SAMSUNG: Make legacy MFC support code depend on SAMSUNG_ATAGS
ARM: EXYNOS: Select SPARSE_IRQ for Exynos
ARM: EXYNOS: Remove mach/irqs.h header
ARM: EXYNOS: Remove unused base addresses from mach/map.h header
ARM: EXYNOS: Remove CONFIG_SOC_EXYNOS4412
ARM: EXYNOS: Remove mach/regs-usb-phy.h header
arch/arm/Kconfig | 15 +-
arch/arm/Makefile | 1 +
arch/arm/mach-exynos/Kconfig | 14 +-
arch/arm/mach-exynos/Makefile | 6 -
arch/arm/mach-exynos/common.c | 472 +-------
arch/arm/mach-exynos/dev-audio.c | 254 ----
arch/arm/mach-exynos/dev-uart.c | 55 -
arch/arm/mach-exynos/firmware.c | 22 +-
arch/arm/mach-exynos/include/mach/gpio.h | 289 -----
arch/arm/mach-exynos/include/mach/irqs.h | 476 --------
arch/arm/mach-exynos/include/mach/map.h | 214 ----
arch/arm/mach-exynos/include/mach/pm-core.h | 5 +
arch/arm/mach-exynos/include/mach/regs-gpio.h | 40 -
arch/arm/mach-exynos/include/mach/regs-usb-phy.h | 74 --
arch/arm/mach-exynos/mach-armlex4210.c | 207 ----
arch/arm/mach-exynos/mach-nuri.c | 1388 ----------------------
arch/arm/mach-exynos/mach-origen.c | 823 -------------
arch/arm/mach-exynos/mach-smdk4x12.c | 396 ------
arch/arm/mach-exynos/mach-smdkv310.c | 444 -------
arch/arm/mach-exynos/mach-universal_c210.c | 1159 ------------------
arch/arm/mach-exynos/pm.c | 1 -
arch/arm/mach-exynos/pm_domains.c | 94 +-
arch/arm/mach-exynos/setup-fimc.c | 44 -
arch/arm/mach-exynos/setup-fimd0.c | 43 -
arch/arm/mach-exynos/setup-i2c0.c | 29 -
arch/arm/mach-exynos/setup-i2c1.c | 23 -
arch/arm/mach-exynos/setup-i2c2.c | 23 -
arch/arm/mach-exynos/setup-i2c3.c | 23 -
arch/arm/mach-exynos/setup-i2c4.c | 23 -
arch/arm/mach-exynos/setup-i2c5.c | 23 -
arch/arm/mach-exynos/setup-i2c6.c | 23 -
arch/arm/mach-exynos/setup-i2c7.c | 23 -
arch/arm/mach-exynos/setup-keypad.c | 36 -
arch/arm/mach-exynos/setup-sdhci-gpio.c | 152 ---
arch/arm/mach-exynos/setup-spi.c | 45 -
arch/arm/mach-exynos/setup-usb-phy.c | 223 ----
arch/arm/plat-samsung/Kconfig | 40 +-
arch/arm/plat-samsung/Makefile | 11 +-
arch/arm/plat-samsung/include/plat/cpu.h | 6 +-
arch/arm/plat-samsung/include/plat/pm.h | 5 +
arch/arm/plat-samsung/init.c | 8 +-
arch/arm/plat-samsung/pm-gpio.c | 5 +-
arch/arm/plat-samsung/pm.c | 8 +-
arch/arm/plat-samsung/s5p-dev-mfc.c | 11 +-
drivers/cpufreq/Kconfig.arm | 2 +-
drivers/gpio/Kconfig | 7 +
drivers/gpio/Makefile | 2 +-
drivers/media/platform/exynos4-is/Kconfig | 2 +-
drivers/thermal/exynos_thermal.c | 2 +-
drivers/tty/serial/samsung.c | 3 +-
50 files changed, 115 insertions(+), 7179 deletions(-)
delete mode 100644 arch/arm/mach-exynos/dev-audio.c
delete mode 100644 arch/arm/mach-exynos/dev-uart.c
delete mode 100644 arch/arm/mach-exynos/include/mach/gpio.h
delete mode 100644 arch/arm/mach-exynos/include/mach/irqs.h
delete mode 100644 arch/arm/mach-exynos/include/mach/regs-gpio.h
delete mode 100644 arch/arm/mach-exynos/include/mach/regs-usb-phy.h
delete mode 100644 arch/arm/mach-exynos/mach-armlex4210.c
delete mode 100644 arch/arm/mach-exynos/mach-nuri.c
delete mode 100644 arch/arm/mach-exynos/mach-origen.c
delete mode 100644 arch/arm/mach-exynos/mach-smdk4x12.c
delete mode 100644 arch/arm/mach-exynos/mach-smdkv310.c
delete mode 100644 arch/arm/mach-exynos/mach-universal_c210.c
delete mode 100644 arch/arm/mach-exynos/setup-fimc.c
delete mode 100644 arch/arm/mach-exynos/setup-fimd0.c
delete mode 100644 arch/arm/mach-exynos/setup-i2c0.c
delete mode 100644 arch/arm/mach-exynos/setup-i2c1.c
delete mode 100644 arch/arm/mach-exynos/setup-i2c2.c
delete mode 100644 arch/arm/mach-exynos/setup-i2c3.c
delete mode 100644 arch/arm/mach-exynos/setup-i2c4.c
delete mode 100644 arch/arm/mach-exynos/setup-i2c5.c
delete mode 100644 arch/arm/mach-exynos/setup-i2c6.c
delete mode 100644 arch/arm/mach-exynos/setup-i2c7.c
delete mode 100644 arch/arm/mach-exynos/setup-keypad.c
delete mode 100644 arch/arm/mach-exynos/setup-sdhci-gpio.c
delete mode 100644 arch/arm/mach-exynos/setup-spi.c
delete mode 100644 arch/arm/mach-exynos/setup-usb-phy.c
--
1.8.2.1
More information about the linux-arm-kernel
mailing list