[RFC PATCH 1/5] phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs

Sylwester Nawrocki s.nawrocki at samsung.com
Fri Jun 14 13:45:47 EDT 2013


Add a PHY provider driver for the Samsung S5P/Exynos SoC MIPI CSI-2
receiver and MIPI DSI transmitter DPHYs.

Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
 .../bindings/phy/exynos-video-mipi-phy.txt         |   16 ++
 drivers/phy/Kconfig                                |   10 ++
 drivers/phy/Makefile                               |    3 +-
 drivers/phy/exynos_video_mipi_phy.c                |  166 ++++++++++++++++++++
 4 files changed, 194 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/phy/exynos-video-mipi-phy.txt
 create mode 100644 drivers/phy/exynos_video_mipi_phy.c

diff --git a/Documentation/devicetree/bindings/phy/exynos-video-mipi-phy.txt b/Documentation/devicetree/bindings/phy/exynos-video-mipi-phy.txt
new file mode 100644
index 0000000..32311c89
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/exynos-video-mipi-phy.txt
@@ -0,0 +1,16 @@
+Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY
+-------------------------------------------------
+
+Required properties:
+- compatible : "samsung,<soc_name>-video-phy", currently most SoCs can claim
+  compatibility with the S5PV210 MIPI CSIS/DSIM PHY and thus should use
+  "samsung,s5pv210-video-phy";
+- reg : offset and length of the MIPI DPHY register set;
+- #phy-cells : from the generic phy bindings, must be 1;
+
+For "samsung,s5pv210-video-phy" compatible DPHYs the second cell in the PHY
+specifier identifies the DPHY and its meaning is as follows:
+  0 - MIPI CSIS 0,
+  1 - MIPI DSIM 0,
+  2 - MIPI CSIS 1,
+  3 - MIPI DSIM 1.
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 0764a54..d234e99 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -11,3 +11,13 @@ menuconfig GENERIC_PHY
 	  devices present in the kernel. This layer will have the generic
 	  API by which phy drivers can create PHY using the phy framework and
 	  phy users can obtain reference to the PHY.
+
+if GENERIC_PHY
+
+config EXYNOS_VIDEO_MIPI_PHY
+	bool "S5P/EXYNOS MIPI CSI-2/DSI PHY driver"
+	depends on OF
+	help
+	  Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung
+	  S5P and EXYNOS SoCs.
+endif
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 9e9560f..b16f2c1 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -2,4 +2,5 @@
 # Makefile for the phy drivers.
 #
 
-obj-$(CONFIG_GENERIC_PHY)	+= phy-core.o
+obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
+obj-$(CONFIG_EXYNOS_VIDEO_MIPI_PHY)	+= exynos_video_mipi_phy.o
diff --git a/drivers/phy/exynos_video_mipi_phy.c b/drivers/phy/exynos_video_mipi_phy.c
new file mode 100644
index 0000000..8d4976f
--- /dev/null
+++ b/drivers/phy/exynos_video_mipi_phy.c
@@ -0,0 +1,166 @@
+/*
+ * Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Sylwester Nawrocki <s.nawrocki at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+/* MIPI_PHYn_CONTROL register bit definitions */
+#define EXYNOS_MIPI_PHY_ENABLE		(1 << 0)
+#define EXYNOS_MIPI_PHY_SRESETN		(1 << 1)
+#define EXYNOS_MIPI_PHY_MRESETN		(1 << 2)
+#define EXYNOS_MIPI_PHY_RESET_MASK	(3 << 1)
+
+#define EXYNOS_MAX_VIDEO_PHYS		4
+
+struct exynos_video_phy {
+	spinlock_t slock;
+	struct phy *phys[EXYNOS_MAX_VIDEO_PHYS];
+	void __iomem *regs;
+};
+
+/*
+ * The @id argument specifies MIPI CSIS or DSIM PHY as follows:
+ *  0 - MIPI CSIS 0
+ *  1 - MIPI DSIM 0
+ *  2 - MIPI CSIS 1
+ *  3 - MIPI DSIM 1
+ */
+static int set_phy_state(struct exynos_video_phy *state,
+					unsigned int id, int on)
+{
+	void __iomem *addr = id < 2 ? state->regs : state->regs + 4;
+	unsigned long flags;
+	u32 reg, reset;
+
+	pr_debug("%s(): id: %d, on: %d, addr: %#x, base: %#x\n",
+		 __func__, id, on, (u32)addr, (u32)state->regs);
+
+	if (WARN_ON(id > EXYNOS_MAX_VIDEO_PHYS))
+		return -EINVAL;
+
+	if (id & 1)
+		reset = EXYNOS_MIPI_PHY_MRESETN;
+	else
+		reset = EXYNOS_MIPI_PHY_SRESETN;
+
+	spin_lock_irqsave(&state->slock, flags);
+
+	reg = readl(addr);
+	if (on)
+		reg |= reset;
+	else
+		reg &= ~reset;
+	writel(reg, addr);
+
+	if (on)
+		reg |= EXYNOS_MIPI_PHY_ENABLE;
+	else if (!(reg & EXYNOS_MIPI_PHY_RESET_MASK))
+		reg &= ~EXYNOS_MIPI_PHY_ENABLE;
+
+	writel(reg, addr);
+
+	spin_unlock_irqrestore(&state->slock, flags);
+	return 0;
+}
+
+static int exynos_video_phy_power_on(struct phy *phy)
+{
+	struct exynos_video_phy *state = dev_get_drvdata(&phy->dev);
+	return set_phy_state(state, phy->id, 1);
+}
+
+static int exynos_video_phy_power_off(struct phy *phy)
+{
+	struct exynos_video_phy *state = dev_get_drvdata(&phy->dev);
+	return set_phy_state(state, phy->id, 0);
+}
+
+static struct phy *exynos_video_phy_xlate(struct device *dev,
+					struct of_phandle_args *args)
+{
+	struct exynos_video_phy *state = dev_get_drvdata(dev);
+
+	if (WARN_ON(args->args[0] > EXYNOS_MAX_VIDEO_PHYS))
+		return NULL;
+
+	return state->phys[args->args[0]];
+}
+
+static struct phy_ops exynos_video_phy_ops = {
+	.power_on	= exynos_video_phy_power_on,
+	.power_off	= exynos_video_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int exynos_video_phy_probe(struct platform_device *pdev)
+{
+	struct exynos_video_phy *state;
+	struct device *dev = &pdev->dev;
+	struct resource res;
+	struct phy_provider *phy_provider;
+	int ret, i;
+
+	state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	ret = of_address_to_resource(dev->of_node, 0, &res);
+	if (ret < 0)
+		return ret;
+
+	state->regs = devm_ioremap_resource(dev, &res);
+	if (IS_ERR(state->regs))
+		return PTR_ERR(state->regs);
+
+	dev_set_drvdata(dev, state);
+
+	phy_provider = devm_of_phy_provider_register(dev, THIS_MODULE,
+					    exynos_video_phy_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	for (i = 0; i < EXYNOS_MAX_VIDEO_PHYS; i++) {
+		state->phys[i] = devm_phy_create(dev, i, &exynos_video_phy_ops,
+									state);
+		if (IS_ERR(state->phys[i])) {
+			dev_err(dev, "failed to create PHY %d\n", i);
+			return PTR_ERR(state->phys[i]);
+		}
+	}
+
+	return 0;
+}
+
+static const struct of_device_id exynos_video_phy_of_match[] = {
+	{ .compatible = "samsung,s5pv210-video-phy" },
+	{ },
+};
+
+static struct platform_driver exynos_video_phy_driver = {
+	.probe	= exynos_video_phy_probe,
+	.driver = {
+		.of_match_table	= exynos_video_phy_of_match,
+		.name  = "exynos-video-phy",
+		.owner = THIS_MODULE,
+	}
+};
+module_platform_driver(exynos_video_phy_driver);
+
+MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC MIPI CSI-2/DSI DPHY driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki at samsung.com>");
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list