[PATCH 4/5] pinctrl: dynamically alloc temp array when parsing dt pinconf options
Heiko Stübner
heiko at sntech.de
Fri Jun 14 11:43:55 EDT 2013
Allocating the temorary array in pinconf_generic_parse_dt_config on stack
might cause problems later on, when the number of options grows over time.
Therefore also allocate this array dynamically to be on the safe side.
Suggested-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
drivers/pinctrl/pinconf-generic.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index ea9da17..794dad7 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -182,7 +182,7 @@ int pinconf_generic_parse_dt_config(struct device_node *np,
unsigned long **configs,
unsigned int *nconfigs)
{
- unsigned long cfg[ARRAY_SIZE(dt_params)];
+ unsigned long *cfg;
unsigned int ncfg = 0;
int ret;
int i;
@@ -191,6 +191,11 @@ int pinconf_generic_parse_dt_config(struct device_node *np,
if (!np)
return -EINVAL;
+ /* allocate a temporary array big enough to hold one of each option */
+ cfg = kzalloc(sizeof(*cfg) * ARRAY_SIZE(dt_params), GFP_KERNEL);
+ if (!cfg)
+ return -ENOMEM;
+
for (i = 0; i < ARRAY_SIZE(dt_params); i++) {
struct pinconf_generic_dt_params *par = &dt_params[i];
ret = of_property_read_u32(np, par->property, &val);
@@ -208,11 +213,13 @@ int pinconf_generic_parse_dt_config(struct device_node *np,
ncfg++;
}
+ ret = 0;
+
/* no configs found at all */
if (ncfg == 0) {
*configs = NULL;
*nconfigs = 0;
- return 0;
+ goto out;
}
/*
@@ -220,11 +227,16 @@ int pinconf_generic_parse_dt_config(struct device_node *np,
* found properties.
*/
*configs = kzalloc(ncfg * sizeof(unsigned long), GFP_KERNEL);
- if (!*configs)
- return -ENOMEM;
+ if (!*configs) {
+ ret = -ENOMEM;
+ goto out;
+ }
- memcpy(*configs, &cfg, ncfg * sizeof(unsigned long));
+ memcpy(*configs, cfg, ncfg * sizeof(unsigned long));
*nconfigs = ncfg;
- return 0;
+
+out:
+ kfree(cfg);
+ return ret;
}
#endif
--
1.7.10.4
More information about the linux-arm-kernel
mailing list