[PATCH v2 3/4] ARM: davinci: da850: add GPIO DT entries

[Philip Avinash]

From: KV Sujith <sujithkv at ti.com>

Add DT entries for Davinci GPIO.

Signed-off-by: KV Sujith <sujithkv at ti.com>
Signed-off-by: Philip Avinash <avinashphilip at ti.com>
---
Changes since v1:
	- interrupts member defined as array and with interrupt flags

 arch/arm/boot/dts/da850.dtsi |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 3b66020..cd7b362 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -8,6 +8,7 @@
  * option) any later version.
  */
 #include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	arm {
@@ -126,6 +127,20 @@
 				>;
 			};
 		};
+		gpio: gpio at 1e26000 {
+			compatible = "ti,da830-gpio";
+			reg = <0x226000 0x1000>;
+			interrupts = <42 IRQ_TYPE_EDGE_BOTH
+				43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
+				45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
+				47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
+				49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
+			ngpio = <144>;
+			intc_irq_num = <101>;
+			gpio_unbanked = <0>;
+			status = "disabled";
+		};
 		serial0: serial at 1c42000 {
 			compatible = "ns16550a";
 			reg = <0x42000 0x100>;
-- 
1.7.9.5