[PATCH 14/15] ARM: shmobile: Remove AP4EVB board support
Simon Horman
horms at verge.net.au
Thu Jun 13 21:02:54 EDT 2013
On Thu, Jun 13, 2013 at 09:36:51PM +0200, Guennadi Liakhovetski wrote:
> Hi Simon
>
> On Thu, 13 Jun 2013, Simon Horman wrote:
>
> > From: Magnus Damm <damm at opensource.se>
> >
> > Remove board support for the sh7372 based AP4EVB board
> >
> > The sh7372 SoC support code is still kept around since it
> > is in use by the Mackerel board which is basically a more
> > recent board where the design is based on AP4EVB.
> >
> > Signed-off-by: Magnus Damm <damm at opensource.se>
> > Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
>
> It would be a pity if this patch gets pulled now. We're still discussing
> with Magnus, I believe. My opinion is, that this board is a good testing
> platform for V4L2. It is the only board in the mainline, using the CSI2
> interface, present on multiple Renesas SoCs, including r8a73a4 (APE6), and
> (probably, not 100% sure) sh73a0 (AG5), and the IMX074 camera sensor, not
> present on any other platform. If this board is removed, supporting both
> CSI2 and IMX074 will become difficult. Besides, AP4EVB is used as an
> example in my V4L2 clock / async probing patch series:
>
> http://www.mail-archive.com/linux-media@vger.kernel.org/msg63174.html
>
> If still possible, would be good to delay removing this board until we
> complete our discussion.
Does the board still work with the rest of this series applied?
>
> Thanks
> Guennadi
>
> > ---
> > arch/arm/configs/ap4evb_defconfig | 56 -
> > arch/arm/mach-shmobile/Kconfig | 21 -
> > arch/arm/mach-shmobile/Makefile | 1 -
> > arch/arm/mach-shmobile/Makefile.boot | 1 -
> > arch/arm/mach-shmobile/board-ap4evb.c | 1310 --------------------
> > .../arm/mach-shmobile/include/mach/head-ap4evb.txt | 93 --
> > arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h | 29 -
> > arch/arm/mach-shmobile/include/mach/mmc.h | 4 +-
> > arch/arm/mach-shmobile/include/mach/zboot.h | 6 +-
> > 9 files changed, 2 insertions(+), 1519 deletions(-)
> > delete mode 100644 arch/arm/configs/ap4evb_defconfig
> > delete mode 100644 arch/arm/mach-shmobile/board-ap4evb.c
> > delete mode 100644 arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
> > delete mode 100644 arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h
> >
> > diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig
> > deleted file mode 100644
> > index 66894f7..0000000
> > --- a/arch/arm/configs/ap4evb_defconfig
> > +++ /dev/null
> > @@ -1,56 +0,0 @@
> > -CONFIG_EXPERIMENTAL=y
> > -CONFIG_SYSVIPC=y
> > -CONFIG_IKCONFIG=y
> > -CONFIG_IKCONFIG_PROC=y
> > -CONFIG_LOG_BUF_SHIFT=16
> > -CONFIG_BLK_DEV_INITRD=y
> > -CONFIG_SLAB=y
> > -# CONFIG_BLK_DEV_BSG is not set
> > -# CONFIG_IOSCHED_DEADLINE is not set
> > -# CONFIG_IOSCHED_CFQ is not set
> > -CONFIG_ARCH_SHMOBILE=y
> > -CONFIG_ARCH_SH7372=y
> > -CONFIG_MACH_AP4EVB=y
> > -CONFIG_AEABI=y
> > -# CONFIG_OABI_COMPAT is not set
> > -CONFIG_ZBOOT_ROM_TEXT=0x0
> > -CONFIG_ZBOOT_ROM_BSS=0x0
> > -CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200"
> > -CONFIG_KEXEC=y
> > -CONFIG_PM=y
> > -# CONFIG_SUSPEND is not set
> > -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> > -# CONFIG_FIRMWARE_IN_KERNEL is not set
> > -CONFIG_MTD=y
> > -CONFIG_MTD_CONCAT=y
> > -CONFIG_MTD_PARTITIONS=y
> > -CONFIG_MTD_CHAR=y
> > -CONFIG_MTD_BLOCK=y
> > -CONFIG_MTD_CFI=y
> > -CONFIG_MTD_CFI_INTELEXT=y
> > -CONFIG_MTD_PHYSMAP=y
> > -CONFIG_MTD_NAND=y
> > -# CONFIG_BLK_DEV is not set
> > -# CONFIG_MISC_DEVICES is not set
> > -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> > -# CONFIG_INPUT_KEYBOARD is not set
> > -# CONFIG_INPUT_MOUSE is not set
> > -# CONFIG_SERIO is not set
> > -CONFIG_SERIAL_SH_SCI=y
> > -CONFIG_SERIAL_SH_SCI_NR_UARTS=8
> > -CONFIG_SERIAL_SH_SCI_CONSOLE=y
> > -# CONFIG_LEGACY_PTYS is not set
> > -# CONFIG_HW_RANDOM is not set
> > -# CONFIG_HWMON is not set
> > -# CONFIG_VGA_CONSOLE is not set
> > -# CONFIG_HID_SUPPORT is not set
> > -# CONFIG_USB_SUPPORT is not set
> > -# CONFIG_DNOTIFY is not set
> > -CONFIG_TMPFS=y
> > -# CONFIG_MISC_FILESYSTEMS is not set
> > -CONFIG_MAGIC_SYSRQ=y
> > -CONFIG_DEBUG_KERNEL=y
> > -# CONFIG_DETECT_SOFTLOCKUP is not set
> > -# CONFIG_RCU_CPU_STALL_DETECTOR is not set
> > -# CONFIG_FTRACE is not set
> > -# CONFIG_CRC32 is not set
> > diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
> > index 747f68a..ae1a530 100644
> > --- a/arch/arm/mach-shmobile/Kconfig
> > +++ b/arch/arm/mach-shmobile/Kconfig
> > @@ -69,27 +69,6 @@ config ARCH_EMEV2
> >
> > comment "SH-Mobile Board Type"
> >
> > -config MACH_AP4EVB
> > - bool "AP4EVB board"
> > - depends on ARCH_SH7372
> > - select ARCH_REQUIRE_GPIOLIB
> > - select REGULATOR_FIXED_VOLTAGE if REGULATOR
> > - select SH_LCD_MIPI_DSI
> > - select SND_SOC_AK4642 if SND_SIMPLE_CARD
> > -
> > -choice
> > - prompt "AP4EVB LCD panel selection"
> > - default AP4EVB_QHD
> > - depends on MACH_AP4EVB
> > -
> > -config AP4EVB_QHD
> > - bool "MIPI-DSI QHD (960x540)"
> > -
> > -config AP4EVB_WVGA
> > - bool "Parallel WVGA (800x480)"
> > -
> > -endchoice
> > -
> > config MACH_AG5EVM
> > bool "AG5EVM board"
> > depends on ARCH_SH73A0
> > diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
> > index 068f1da..aae28f3 100644
> > --- a/arch/arm/mach-shmobile/Makefile
> > +++ b/arch/arm/mach-shmobile/Makefile
> > @@ -35,7 +35,6 @@ obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o
> > obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o
> >
> > # Board objects
> > -obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o
> > obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o
> > obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
> > obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
> > diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
> > index 6b147ea..3030673 100644
> > --- a/arch/arm/mach-shmobile/Makefile.boot
> > +++ b/arch/arm/mach-shmobile/Makefile.boot
> > @@ -1,7 +1,6 @@
> > # per-board load address for uImage
> > loadaddr-y :=
> > loadaddr-$(CONFIG_MACH_AG5EVM) += 0x40008000
> > -loadaddr-$(CONFIG_MACH_AP4EVB) += 0x40008000
> > loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
> > loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
> > loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
> > diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
> > deleted file mode 100644
> > index 297bf5e..0000000
> > --- a/arch/arm/mach-shmobile/board-ap4evb.c
> > +++ /dev/null
> > @@ -1,1310 +0,0 @@
> > -/*
> > - * AP4EVB board support
> > - *
> > - * Copyright (C) 2010 Magnus Damm
> > - * Copyright (C) 2008 Yoshihiro Shimoda
> > - *
> > - * This program is free software; you can redistribute it and/or modify
> > - * it under the terms of the GNU General Public License as published by
> > - * the Free Software Foundation; version 2 of the License.
> > - *
> > - * This program is distributed in the hope that it will be useful,
> > - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > - * GNU General Public License for more details.
> > - *
> > - * You should have received a copy of the GNU General Public License
> > - * along with this program; if not, write to the Free Software
> > - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> > - */
> > -#include <linux/clk.h>
> > -#include <linux/kernel.h>
> > -#include <linux/init.h>
> > -#include <linux/interrupt.h>
> > -#include <linux/irq.h>
> > -#include <linux/platform_device.h>
> > -#include <linux/delay.h>
> > -#include <linux/mfd/tmio.h>
> > -#include <linux/mmc/host.h>
> > -#include <linux/mmc/sh_mobile_sdhi.h>
> > -#include <linux/mtd/mtd.h>
> > -#include <linux/mtd/partitions.h>
> > -#include <linux/mtd/physmap.h>
> > -#include <linux/mmc/sh_mmcif.h>
> > -#include <linux/i2c.h>
> > -#include <linux/i2c/tsc2007.h>
> > -#include <linux/io.h>
> > -#include <linux/pinctrl/machine.h>
> > -#include <linux/regulator/fixed.h>
> > -#include <linux/regulator/machine.h>
> > -#include <linux/smsc911x.h>
> > -#include <linux/sh_intc.h>
> > -#include <linux/sh_clk.h>
> > -#include <linux/gpio.h>
> > -#include <linux/input.h>
> > -#include <linux/leds.h>
> > -#include <linux/input/sh_keysc.h>
> > -#include <linux/usb/r8a66597.h>
> > -#include <linux/pm_clock.h>
> > -#include <linux/dma-mapping.h>
> > -
> > -#include <media/sh_mobile_ceu.h>
> > -#include <media/sh_mobile_csi2.h>
> > -#include <media/soc_camera.h>
> > -
> > -#include <sound/sh_fsi.h>
> > -#include <sound/simple_card.h>
> > -
> > -#include <video/sh_mobile_hdmi.h>
> > -#include <video/sh_mobile_lcdc.h>
> > -#include <video/sh_mipi_dsi.h>
> > -
> > -#include <mach/common.h>
> > -#include <mach/irqs.h>
> > -#include <mach/sh7372.h>
> > -
> > -#include <asm/mach-types.h>
> > -#include <asm/mach/arch.h>
> > -#include <asm/setup.h>
> > -
> > -#include "sh-gpio.h"
> > -
> > -/*
> > - * Address Interface BusWidth note
> > - * ------------------------------------------------------------------
> > - * 0x0000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = ON
> > - * 0x0800_0000 user area -
> > - * 0x1000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = OFF
> > - * 0x1400_0000 Ether (LAN9220) 16bit
> > - * 0x1600_0000 user area - cannot use with NAND
> > - * 0x1800_0000 user area -
> > - * 0x1A00_0000 -
> > - * 0x4000_0000 LPDDR2-SDRAM (POP) 32bit
> > - */
> > -
> > -/*
> > - * NOR Flash ROM
> > - *
> > - * SW1 | SW2 | SW7 | NOR Flash ROM
> > - * bit1 | bit1 bit2 | bit1 | Memory allocation
> > - * ------+------------+------+------------------
> > - * OFF | ON OFF | ON | Area 0
> > - * OFF | ON OFF | OFF | Area 4
> > - */
> > -
> > -/*
> > - * NAND Flash ROM
> > - *
> > - * SW1 | SW2 | SW7 | NAND Flash ROM
> > - * bit1 | bit1 bit2 | bit2 | Memory allocation
> > - * ------+------------+------+------------------
> > - * OFF | ON OFF | ON | FCE 0
> > - * OFF | ON OFF | OFF | FCE 1
> > - */
> > -
> > -/*
> > - * SMSC 9220
> > - *
> > - * SW1 SMSC 9220
> > - * -----------------------
> > - * ON access disable
> > - * OFF access enable
> > - */
> > -
> > -/*
> > - * LCD / IRQ / KEYSC / IrDA
> > - *
> > - * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (QHD-TouchScreen)
> > - * LCD = 2nd LCDC (WVGA)
> > - *
> > - * | SW43 |
> > - * SW3 | ON | OFF |
> > - * -------------+-----------------------+---------------+
> > - * ON | KEY / IrDA | LCD |
> > - * OFF | KEY / IrDA / IRQ | IRQ |
> > - *
> > - *
> > - * QHD / WVGA display
> > - *
> > - * You can choice display type on menuconfig.
> > - * Then, check above dip-switch.
> > - */
> > -
> > -/*
> > - * USB
> > - *
> > - * J7 : 1-2 MAX3355E VBUS
> > - * 2-3 DC 5.0V
> > - *
> > - * S39: bit2: off
> > - */
> > -
> > -/*
> > - * FSI/FSMI
> > - *
> > - * SW41 : ON : SH-Mobile AP4 Audio Mode
> > - * : OFF : Bluetooth Audio Mode
> > - *
> > - * it needs amixer settings for playing
> > - *
> > - * amixer set "Headphone Enable" on
> > - */
> > -
> > -/*
> > - * MMC0/SDHI1 (CN7)
> > - *
> > - * J22 : select card voltage
> > - * 1-2 pin : 1.8v
> > - * 2-3 pin : 3.3v
> > - *
> > - * SW1 | SW33
> > - * | bit1 | bit2 | bit3 | bit4
> > - * ------------+------+------+------+-------
> > - * MMC0 OFF | OFF | ON | ON | X
> > - * SDHI1 OFF | ON | X | OFF | ON
> > - *
> > - * voltage lebel
> > - * CN7 : 1.8v
> > - * CN12: 3.3v
> > - */
> > -
> > -/* Dummy supplies, where voltage doesn't matter */
> > -static struct regulator_consumer_supply fixed1v8_power_consumers[] =
> > -{
> > - /* J22 default position: 1.8V */
> > - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
> > - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
> > - REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
> > - REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
> > -};
> > -
> > -static struct regulator_consumer_supply fixed3v3_power_consumers[] =
> > -{
> > - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
> > - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
> > -};
> > -
> > -static struct regulator_consumer_supply dummy_supplies[] = {
> > - REGULATOR_SUPPLY("vddvario", "smsc911x"),
> > - REGULATOR_SUPPLY("vdd33a", "smsc911x"),
> > -};
> > -
> > -/* MTD */
> > -static struct mtd_partition nor_flash_partitions[] = {
> > - {
> > - .name = "loader",
> > - .offset = 0x00000000,
> > - .size = 512 * 1024,
> > - .mask_flags = MTD_WRITEABLE,
> > - },
> > - {
> > - .name = "bootenv",
> > - .offset = MTDPART_OFS_APPEND,
> > - .size = 512 * 1024,
> > - .mask_flags = MTD_WRITEABLE,
> > - },
> > - {
> > - .name = "kernel_ro",
> > - .offset = MTDPART_OFS_APPEND,
> > - .size = 8 * 1024 * 1024,
> > - .mask_flags = MTD_WRITEABLE,
> > - },
> > - {
> > - .name = "kernel",
> > - .offset = MTDPART_OFS_APPEND,
> > - .size = 8 * 1024 * 1024,
> > - },
> > - {
> > - .name = "data",
> > - .offset = MTDPART_OFS_APPEND,
> > - .size = MTDPART_SIZ_FULL,
> > - },
> > -};
> > -
> > -static struct physmap_flash_data nor_flash_data = {
> > - .width = 2,
> > - .parts = nor_flash_partitions,
> > - .nr_parts = ARRAY_SIZE(nor_flash_partitions),
> > -};
> > -
> > -static struct resource nor_flash_resources[] = {
> > - [0] = {
> > - .start = 0x20000000, /* CS0 shadow instead of regular CS0 */
> > - .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */
> > - .flags = IORESOURCE_MEM,
> > - }
> > -};
> > -
> > -static struct platform_device nor_flash_device = {
> > - .name = "physmap-flash",
> > - .dev = {
> > - .platform_data = &nor_flash_data,
> > - },
> > - .num_resources = ARRAY_SIZE(nor_flash_resources),
> > - .resource = nor_flash_resources,
> > -};
> > -
> > -/* SMSC 9220 */
> > -static struct resource smc911x_resources[] = {
> > - {
> > - .start = 0x14000000,
> > - .end = 0x16000000 - 1,
> > - .flags = IORESOURCE_MEM,
> > - }, {
> > - .start = evt2irq(0x02c0) /* IRQ6A */,
> > - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
> > - },
> > -};
> > -
> > -static struct smsc911x_platform_config smsc911x_info = {
> > - .flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
> > - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
> > - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
> > -};
> > -
> > -static struct platform_device smc911x_device = {
> > - .name = "smsc911x",
> > - .id = -1,
> > - .num_resources = ARRAY_SIZE(smc911x_resources),
> > - .resource = smc911x_resources,
> > - .dev = {
> > - .platform_data = &smsc911x_info,
> > - },
> > -};
> > -
> > -/*
> > - * The card detect pin of the top SD/MMC slot (CN7) is active low and is
> > - * connected to GPIO A22 of SH7372 (GPIO 41).
> > - */
> > -static int slot_cn7_get_cd(struct platform_device *pdev)
> > -{
> > - return !gpio_get_value(41);
> > -}
> > -/* MERAM */
> > -static struct sh_mobile_meram_info meram_info = {
> > - .addr_mode = SH_MOBILE_MERAM_MODE1,
> > -};
> > -
> > -static struct resource meram_resources[] = {
> > - [0] = {
> > - .name = "regs",
> > - .start = 0xe8000000,
> > - .end = 0xe807ffff,
> > - .flags = IORESOURCE_MEM,
> > - },
> > - [1] = {
> > - .name = "meram",
> > - .start = 0xe8080000,
> > - .end = 0xe81fffff,
> > - .flags = IORESOURCE_MEM,
> > - },
> > -};
> > -
> > -static struct platform_device meram_device = {
> > - .name = "sh_mobile_meram",
> > - .id = 0,
> > - .num_resources = ARRAY_SIZE(meram_resources),
> > - .resource = meram_resources,
> > - .dev = {
> > - .platform_data = &meram_info,
> > - },
> > -};
> > -
> > -/* SH_MMCIF */
> > -static struct resource sh_mmcif_resources[] = {
> > - [0] = {
> > - .name = "MMCIF",
> > - .start = 0xE6BD0000,
> > - .end = 0xE6BD00FF,
> > - .flags = IORESOURCE_MEM,
> > - },
> > - [1] = {
> > - /* MMC ERR */
> > - .start = evt2irq(0x1ac0),
> > - .flags = IORESOURCE_IRQ,
> > - },
> > - [2] = {
> > - /* MMC NOR */
> > - .start = evt2irq(0x1ae0),
> > - .flags = IORESOURCE_IRQ,
> > - },
> > -};
> > -
> > -static struct sh_mmcif_plat_data sh_mmcif_plat = {
> > - .sup_pclk = 0,
> > - .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
> > - .caps = MMC_CAP_4_BIT_DATA |
> > - MMC_CAP_8_BIT_DATA |
> > - MMC_CAP_NEEDS_POLL,
> > - .get_cd = slot_cn7_get_cd,
> > - .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
> > - .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
> > -};
> > -
> > -static struct platform_device sh_mmcif_device = {
> > - .name = "sh_mmcif",
> > - .id = 0,
> > - .dev = {
> > - .dma_mask = NULL,
> > - .coherent_dma_mask = 0xffffffff,
> > - .platform_data = &sh_mmcif_plat,
> > - },
> > - .num_resources = ARRAY_SIZE(sh_mmcif_resources),
> > - .resource = sh_mmcif_resources,
> > -};
> > -
> > -/* SDHI0 */
> > -static struct sh_mobile_sdhi_info sdhi0_info = {
> > - .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
> > - .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
> > - .tmio_caps = MMC_CAP_SDIO_IRQ,
> > -};
> > -
> > -static struct resource sdhi0_resources[] = {
> > - [0] = {
> > - .name = "SDHI0",
> > - .start = 0xe6850000,
> > - .end = 0xe68500ff,
> > - .flags = IORESOURCE_MEM,
> > - },
> > - [1] = {
> > - .start = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */,
> > - .flags = IORESOURCE_IRQ,
> > - },
> > - [2] = {
> > - .start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
> > - .flags = IORESOURCE_IRQ,
> > - },
> > - [3] = {
> > - .start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
> > - .flags = IORESOURCE_IRQ,
> > - },
> > -};
> > -
> > -static struct platform_device sdhi0_device = {
> > - .name = "sh_mobile_sdhi",
> > - .num_resources = ARRAY_SIZE(sdhi0_resources),
> > - .resource = sdhi0_resources,
> > - .id = 0,
> > - .dev = {
> > - .platform_data = &sdhi0_info,
> > - },
> > -};
> > -
> > -/* SDHI1 */
> > -static struct sh_mobile_sdhi_info sdhi1_info = {
> > - .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
> > - .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
> > - .tmio_ocr_mask = MMC_VDD_165_195,
> > - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
> > - .tmio_caps = MMC_CAP_NEEDS_POLL | MMC_CAP_SDIO_IRQ,
> > - .get_cd = slot_cn7_get_cd,
> > -};
> > -
> > -static struct resource sdhi1_resources[] = {
> > - [0] = {
> > - .name = "SDHI1",
> > - .start = 0xe6860000,
> > - .end = 0xe68600ff,
> > - .flags = IORESOURCE_MEM,
> > - },
> > - [1] = {
> > - .start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */
> > - .flags = IORESOURCE_IRQ,
> > - },
> > - [2] = {
> > - .start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
> > - .flags = IORESOURCE_IRQ,
> > - },
> > - [3] = {
> > - .start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
> > - .flags = IORESOURCE_IRQ,
> > - },
> > -};
> > -
> > -static struct platform_device sdhi1_device = {
> > - .name = "sh_mobile_sdhi",
> > - .num_resources = ARRAY_SIZE(sdhi1_resources),
> > - .resource = sdhi1_resources,
> > - .id = 1,
> > - .dev = {
> > - .platform_data = &sdhi1_info,
> > - },
> > -};
> > -
> > -/* USB1 */
> > -static void usb1_host_port_power(int port, int power)
> > -{
> > - if (!power) /* only power-on supported for now */
> > - return;
> > -
> > - /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
> > - __raw_writew(__raw_readw(IOMEM(0xE68B0008)) | 0x600, IOMEM(0xE68B0008));
> > -}
> > -
> > -static struct r8a66597_platdata usb1_host_data = {
> > - .on_chip = 1,
> > - .port_power = usb1_host_port_power,
> > -};
> > -
> > -static struct resource usb1_host_resources[] = {
> > - [0] = {
> > - .name = "USBHS",
> > - .start = 0xE68B0000,
> > - .end = 0xE68B00E6 - 1,
> > - .flags = IORESOURCE_MEM,
> > - },
> > - [1] = {
> > - .start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
> > - .flags = IORESOURCE_IRQ,
> > - },
> > -};
> > -
> > -static struct platform_device usb1_host_device = {
> > - .name = "r8a66597_hcd",
> > - .id = 1,
> > - .dev = {
> > - .dma_mask = NULL, /* not use dma */
> > - .coherent_dma_mask = 0xffffffff,
> > - .platform_data = &usb1_host_data,
> > - },
> > - .num_resources = ARRAY_SIZE(usb1_host_resources),
> > - .resource = usb1_host_resources,
> > -};
> > -
> > -/*
> > - * QHD display
> > - */
> > -#ifdef CONFIG_AP4EVB_QHD
> > -
> > -/* KEYSC (Needs SW43 set to ON) */
> > -static struct sh_keysc_info keysc_info = {
> > - .mode = SH_KEYSC_MODE_1,
> > - .scan_timing = 3,
> > - .delay = 2500,
> > - .keycodes = {
> > - KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
> > - KEY_5, KEY_6, KEY_7, KEY_8, KEY_9,
> > - KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
> > - KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
> > - KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
> > - },
> > -};
> > -
> > -static struct resource keysc_resources[] = {
> > - [0] = {
> > - .name = "KEYSC",
> > - .start = 0xe61b0000,
> > - .end = 0xe61b0063,
> > - .flags = IORESOURCE_MEM,
> > - },
> > - [1] = {
> > - .start = evt2irq(0x0be0), /* KEYSC_KEY */
> > - .flags = IORESOURCE_IRQ,
> > - },
> > -};
> > -
> > -static struct platform_device keysc_device = {
> > - .name = "sh_keysc",
> > - .id = 0, /* "keysc0" clock */
> > - .num_resources = ARRAY_SIZE(keysc_resources),
> > - .resource = keysc_resources,
> > - .dev = {
> > - .platform_data = &keysc_info,
> > - },
> > -};
> > -
> > -/* MIPI-DSI */
> > -static int sh_mipi_set_dot_clock(struct platform_device *pdev,
> > - void __iomem *base,
> > - int enable)
> > -{
> > - struct clk *pck = clk_get(&pdev->dev, "dsip_clk");
> > -
> > - if (IS_ERR(pck))
> > - return PTR_ERR(pck);
> > -
> > - if (enable) {
> > - /*
> > - * DSIPCLK = 24MHz
> > - * D-PHY = DSIPCLK * ((0x6*2)+1) = 312MHz (see .phyctrl)
> > - * HsByteCLK = D-PHY/8 = 39MHz
> > - *
> > - * X * Y * FPS =
> > - * (544+72+600+16) * (961+8+8+2) * 30 = 36.1MHz
> > - */
> > - clk_set_rate(pck, clk_round_rate(pck, 24000000));
> > - clk_enable(pck);
> > - } else {
> > - clk_disable(pck);
> > - }
> > -
> > - clk_put(pck);
> > -
> > - return 0;
> > -}
> > -
> > -static struct resource mipidsi0_resources[] = {
> > - [0] = {
> > - .start = 0xffc60000,
> > - .end = 0xffc63073,
> > - .flags = IORESOURCE_MEM,
> > - },
> > - [1] = {
> > - .start = 0xffc68000,
> > - .end = 0xffc680ef,
> > - .flags = IORESOURCE_MEM,
> > - },
> > -};
> > -
> > -static struct sh_mipi_dsi_info mipidsi0_info = {
> > - .data_format = MIPI_RGB888,
> > - .channel = LCDC_CHAN_MAINLCD,
> > - .lane = 2,
> > - .vsynw_offset = 17,
> > - .phyctrl = 0x6 << 8,
> > - .flags = SH_MIPI_DSI_SYNC_PULSES_MODE |
> > - SH_MIPI_DSI_HSbyteCLK,
> > - .set_dot_clock = sh_mipi_set_dot_clock,
> > -};
> > -
> > -static struct platform_device mipidsi0_device = {
> > - .name = "sh-mipi-dsi",
> > - .num_resources = ARRAY_SIZE(mipidsi0_resources),
> > - .resource = mipidsi0_resources,
> > - .id = 0,
> > - .dev = {
> > - .platform_data = &mipidsi0_info,
> > - },
> > -};
> > -
> > -static struct platform_device *qhd_devices[] __initdata = {
> > - &mipidsi0_device,
> > - &keysc_device,
> > -};
> > -#endif /* CONFIG_AP4EVB_QHD */
> > -
> > -/* LCDC0 */
> > -static const struct fb_videomode ap4evb_lcdc_modes[] = {
> > - {
> > -#ifdef CONFIG_AP4EVB_QHD
> > - .name = "R63302(QHD)",
> > - .xres = 544,
> > - .yres = 961,
> > - .left_margin = 72,
> > - .right_margin = 600,
> > - .hsync_len = 16,
> > - .upper_margin = 8,
> > - .lower_margin = 8,
> > - .vsync_len = 2,
> > - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
> > -#else
> > - .name = "WVGA Panel",
> > - .xres = 800,
> > - .yres = 480,
> > - .left_margin = 220,
> > - .right_margin = 110,
> > - .hsync_len = 70,
> > - .upper_margin = 20,
> > - .lower_margin = 5,
> > - .vsync_len = 5,
> > - .sync = 0,
> > -#endif
> > - },
> > -};
> > -
> > -static const struct sh_mobile_meram_cfg lcd_meram_cfg = {
> > - .icb[0] = {
> > - .meram_size = 0x40,
> > - },
> > - .icb[1] = {
> > - .meram_size = 0x40,
> > - },
> > -};
> > -
> > -static struct sh_mobile_lcdc_info lcdc_info = {
> > - .meram_dev = &meram_info,
> > - .ch[0] = {
> > - .chan = LCDC_CHAN_MAINLCD,
> > - .fourcc = V4L2_PIX_FMT_RGB565,
> > - .lcd_modes = ap4evb_lcdc_modes,
> > - .num_modes = ARRAY_SIZE(ap4evb_lcdc_modes),
> > - .meram_cfg = &lcd_meram_cfg,
> > -#ifdef CONFIG_AP4EVB_QHD
> > - .tx_dev = &mipidsi0_device,
> > -#endif
> > - }
> > -};
> > -
> > -static struct resource lcdc_resources[] = {
> > - [0] = {
> > - .name = "LCDC",
> > - .start = 0xfe940000, /* P4-only space */
> > - .end = 0xfe943fff,
> > - .flags = IORESOURCE_MEM,
> > - },
> > - [1] = {
> > - .start = intcs_evt2irq(0x580),
> > - .flags = IORESOURCE_IRQ,
> > - },
> > -};
> > -
> > -static struct platform_device lcdc_device = {
> > - .name = "sh_mobile_lcdc_fb",
> > - .num_resources = ARRAY_SIZE(lcdc_resources),
> > - .resource = lcdc_resources,
> > - .dev = {
> > - .platform_data = &lcdc_info,
> > - .coherent_dma_mask = ~0,
> > - },
> > -};
> > -
> > -/* FSI */
> > -#define IRQ_FSI evt2irq(0x1840)
> > -static struct sh_fsi_platform_info fsi_info = {
> > - .port_b = {
> > - .flags = SH_FSI_CLK_CPG |
> > - SH_FSI_FMT_SPDIF,
> > - },
> > -};
> > -
> > -static struct resource fsi_resources[] = {
> > - [0] = {
> > - .name = "FSI",
> > - .start = 0xFE3C0000,
> > - .end = 0xFE3C0400 - 1,
> > - .flags = IORESOURCE_MEM,
> > - },
> > - [1] = {
> > - .start = IRQ_FSI,
> > - .flags = IORESOURCE_IRQ,
> > - },
> > -};
> > -
> > -static struct platform_device fsi_device = {
> > - .name = "sh_fsi2",
> > - .id = -1,
> > - .num_resources = ARRAY_SIZE(fsi_resources),
> > - .resource = fsi_resources,
> > - .dev = {
> > - .platform_data = &fsi_info,
> > - },
> > -};
> > -
> > -static struct asoc_simple_card_info fsi2_ak4643_info = {
> > - .name = "AK4643",
> > - .card = "FSI2A-AK4643",
> > - .codec = "ak4642-codec.0-0013",
> > - .platform = "sh_fsi2",
> > - .daifmt = SND_SOC_DAIFMT_LEFT_J,
> > - .cpu_dai = {
> > - .name = "fsia-dai",
> > - .fmt = SND_SOC_DAIFMT_CBS_CFS,
> > - },
> > - .codec_dai = {
> > - .name = "ak4642-hifi",
> > - .fmt = SND_SOC_DAIFMT_CBM_CFM,
> > - .sysclk = 11289600,
> > - },
> > -};
> > -
> > -static struct platform_device fsi_ak4643_device = {
> > - .name = "asoc-simple-card",
> > - .dev = {
> > - .platform_data = &fsi2_ak4643_info,
> > - },
> > -};
> > -
> > -/* LCDC1 */
> > -static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq,
> > - unsigned long *parent_freq);
> > -
> > -static struct sh_mobile_hdmi_info hdmi_info = {
> > - .flags = HDMI_SND_SRC_SPDIF,
> > - .clk_optimize_parent = ap4evb_clk_optimize,
> > -};
> > -
> > -static struct resource hdmi_resources[] = {
> > - [0] = {
> > - .name = "HDMI",
> > - .start = 0xe6be0000,
> > - .end = 0xe6be00ff,
> > - .flags = IORESOURCE_MEM,
> > - },
> > - [1] = {
> > - /* There's also an HDMI interrupt on INTCS @ 0x18e0 */
> > - .start = evt2irq(0x17e0),
> > - .flags = IORESOURCE_IRQ,
> > - },
> > -};
> > -
> > -static struct platform_device hdmi_device = {
> > - .name = "sh-mobile-hdmi",
> > - .num_resources = ARRAY_SIZE(hdmi_resources),
> > - .resource = hdmi_resources,
> > - .id = -1,
> > - .dev = {
> > - .platform_data = &hdmi_info,
> > - },
> > -};
> > -
> > -static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq,
> > - unsigned long *parent_freq)
> > -{
> > - struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
> > - long error;
> > -
> > - if (IS_ERR(hdmi_ick)) {
> > - int ret = PTR_ERR(hdmi_ick);
> > - pr_err("Cannot get HDMI ICK: %d\n", ret);
> > - return ret;
> > - }
> > -
> > - error = clk_round_parent(hdmi_ick, target, best_freq, parent_freq, 1, 64);
> > -
> > - clk_put(hdmi_ick);
> > -
> > - return error;
> > -}
> > -
> > -static const struct sh_mobile_meram_cfg hdmi_meram_cfg = {
> > - .icb[0] = {
> > - .meram_size = 0x100,
> > - },
> > - .icb[1] = {
> > - .meram_size = 0x100,
> > - },
> > -};
> > -
> > -static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = {
> > - .clock_source = LCDC_CLK_EXTERNAL,
> > - .meram_dev = &meram_info,
> > - .ch[0] = {
> > - .chan = LCDC_CHAN_MAINLCD,
> > - .fourcc = V4L2_PIX_FMT_RGB565,
> > - .interface_type = RGB24,
> > - .clock_divider = 1,
> > - .flags = LCDC_FLAGS_DWPOL,
> > - .meram_cfg = &hdmi_meram_cfg,
> > - .tx_dev = &hdmi_device,
> > - }
> > -};
> > -
> > -static struct resource lcdc1_resources[] = {
> > - [0] = {
> > - .name = "LCDC1",
> > - .start = 0xfe944000,
> > - .end = 0xfe947fff,
> > - .flags = IORESOURCE_MEM,
> > - },
> > - [1] = {
> > - .start = intcs_evt2irq(0x1780),
> > - .flags = IORESOURCE_IRQ,
> > - },
> > -};
> > -
> > -static struct platform_device lcdc1_device = {
> > - .name = "sh_mobile_lcdc_fb",
> > - .num_resources = ARRAY_SIZE(lcdc1_resources),
> > - .resource = lcdc1_resources,
> > - .id = 1,
> > - .dev = {
> > - .platform_data = &sh_mobile_lcdc1_info,
> > - .coherent_dma_mask = ~0,
> > - },
> > -};
> > -
> > -static struct asoc_simple_card_info fsi2_hdmi_info = {
> > - .name = "HDMI",
> > - .card = "FSI2B-HDMI",
> > - .codec = "sh-mobile-hdmi",
> > - .platform = "sh_fsi2",
> > - .cpu_dai = {
> > - .name = "fsib-dai",
> > - .fmt = SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF,
> > - },
> > - .codec_dai = {
> > - .name = "sh_mobile_hdmi-hifi",
> > - },
> > -};
> > -
> > -static struct platform_device fsi_hdmi_device = {
> > - .name = "asoc-simple-card",
> > - .id = 1,
> > - .dev = {
> > - .platform_data = &fsi2_hdmi_info,
> > - },
> > -};
> > -
> > -static struct gpio_led ap4evb_leds[] = {
> > - {
> > - .name = "led4",
> > - .gpio = 185,
> > - .default_state = LEDS_GPIO_DEFSTATE_ON,
> > - },
> > - {
> > - .name = "led2",
> > - .gpio = 186,
> > - .default_state = LEDS_GPIO_DEFSTATE_ON,
> > - },
> > - {
> > - .name = "led3",
> > - .gpio = 187,
> > - .default_state = LEDS_GPIO_DEFSTATE_ON,
> > - },
> > - {
> > - .name = "led1",
> > - .gpio = 188,
> > - .default_state = LEDS_GPIO_DEFSTATE_ON,
> > - }
> > -};
> > -
> > -static struct gpio_led_platform_data ap4evb_leds_pdata = {
> > - .num_leds = ARRAY_SIZE(ap4evb_leds),
> > - .leds = ap4evb_leds,
> > -};
> > -
> > -static struct platform_device leds_device = {
> > - .name = "leds-gpio",
> > - .id = 0,
> > - .dev = {
> > - .platform_data = &ap4evb_leds_pdata,
> > - },
> > -};
> > -
> > -static struct i2c_board_info imx074_info = {
> > - I2C_BOARD_INFO("imx074", 0x1a),
> > -};
> > -
> > -static struct soc_camera_link imx074_link = {
> > - .bus_id = 0,
> > - .board_info = &imx074_info,
> > - .i2c_adapter_id = 0,
> > - .module_name = "imx074",
> > -};
> > -
> > -static struct platform_device ap4evb_camera = {
> > - .name = "soc-camera-pdrv",
> > - .id = 0,
> > - .dev = {
> > - .platform_data = &imx074_link,
> > - },
> > -};
> > -
> > -static struct sh_csi2_client_config csi2_clients[] = {
> > - {
> > - .phy = SH_CSI2_PHY_MAIN,
> > - .lanes = 0, /* default: 2 lanes */
> > - .channel = 0,
> > - .pdev = &ap4evb_camera,
> > - },
> > -};
> > -
> > -static struct sh_csi2_pdata csi2_info = {
> > - .type = SH_CSI2C,
> > - .clients = csi2_clients,
> > - .num_clients = ARRAY_SIZE(csi2_clients),
> > - .flags = SH_CSI2_ECC | SH_CSI2_CRC,
> > -};
> > -
> > -static struct resource csi2_resources[] = {
> > - [0] = {
> > - .name = "CSI2",
> > - .start = 0xffc90000,
> > - .end = 0xffc90fff,
> > - .flags = IORESOURCE_MEM,
> > - },
> > - [1] = {
> > - .start = intcs_evt2irq(0x17a0),
> > - .flags = IORESOURCE_IRQ,
> > - },
> > -};
> > -
> > -static struct sh_mobile_ceu_companion csi2 = {
> > - .id = 0,
> > - .num_resources = ARRAY_SIZE(csi2_resources),
> > - .resource = csi2_resources,
> > - .platform_data = &csi2_info,
> > -};
> > -
> > -static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
> > - .flags = SH_CEU_FLAG_USE_8BIT_BUS,
> > - .max_width = 8188,
> > - .max_height = 8188,
> > - .csi2 = &csi2,
> > -};
> > -
> > -static struct resource ceu_resources[] = {
> > - [0] = {
> > - .name = "CEU",
> > - .start = 0xfe910000,
> > - .end = 0xfe91009f,
> > - .flags = IORESOURCE_MEM,
> > - },
> > - [1] = {
> > - .start = intcs_evt2irq(0x880),
> > - .flags = IORESOURCE_IRQ,
> > - },
> > - [2] = {
> > - /* place holder for contiguous memory */
> > - },
> > -};
> > -
> > -static struct platform_device ceu_device = {
> > - .name = "sh_mobile_ceu",
> > - .id = 0, /* "ceu0" clock */
> > - .num_resources = ARRAY_SIZE(ceu_resources),
> > - .resource = ceu_resources,
> > - .dev = {
> > - .platform_data = &sh_mobile_ceu_info,
> > - .coherent_dma_mask = 0xffffffff,
> > - },
> > -};
> > -
> > -static struct platform_device *ap4evb_devices[] __initdata = {
> > - &leds_device,
> > - &nor_flash_device,
> > - &smc911x_device,
> > - &sdhi0_device,
> > - &sdhi1_device,
> > - &usb1_host_device,
> > - &fsi_device,
> > - &fsi_ak4643_device,
> > - &fsi_hdmi_device,
> > - &sh_mmcif_device,
> > - &hdmi_device,
> > - &lcdc_device,
> > - &lcdc1_device,
> > - &ceu_device,
> > - &ap4evb_camera,
> > - &meram_device,
> > -};
> > -
> > -static void __init hdmi_init_pm_clock(void)
> > -{
> > - struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
> > - int ret;
> > - long rate;
> > -
> > - if (IS_ERR(hdmi_ick)) {
> > - ret = PTR_ERR(hdmi_ick);
> > - pr_err("Cannot get HDMI ICK: %d\n", ret);
> > - goto out;
> > - }
> > -
> > - ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
> > - if (ret < 0) {
> > - pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, sh7372_pllc2_clk.usecount);
> > - goto out;
> > - }
> > -
> > - pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&sh7372_pllc2_clk));
> > -
> > - rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
> > - if (rate < 0) {
> > - pr_err("Cannot get suitable rate: %ld\n", rate);
> > - ret = rate;
> > - goto out;
> > - }
> > -
> > - ret = clk_set_rate(&sh7372_pllc2_clk, rate);
> > - if (ret < 0) {
> > - pr_err("Cannot set rate %ld: %d\n", rate, ret);
> > - goto out;
> > - }
> > -
> > - pr_debug("PLLC2 set frequency %lu\n", rate);
> > -
> > - ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
> > - if (ret < 0)
> > - pr_err("Cannot set HDMI parent: %d\n", ret);
> > -
> > -out:
> > - if (!IS_ERR(hdmi_ick))
> > - clk_put(hdmi_ick);
> > -}
> > -
> > -/* TouchScreen */
> > -#ifdef CONFIG_AP4EVB_QHD
> > -# define GPIO_TSC_PORT 123
> > -#else /* WVGA */
> > -# define GPIO_TSC_PORT 40
> > -#endif
> > -
> > -#define IRQ28 evt2irq(0x3380) /* IRQ28A */
> > -#define IRQ7 evt2irq(0x02e0) /* IRQ7A */
> > -static int ts_get_pendown_state(void)
> > -{
> > - return !gpio_get_value(GPIO_TSC_PORT);
> > -}
> > -
> > -static int ts_init(void)
> > -{
> > - gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL);
> > -
> > - return 0;
> > -}
> > -
> > -static struct tsc2007_platform_data tsc2007_info = {
> > - .model = 2007,
> > - .x_plate_ohms = 180,
> > - .get_pendown_state = ts_get_pendown_state,
> > - .init_platform_hw = ts_init,
> > -};
> > -
> > -static struct i2c_board_info tsc_device = {
> > - I2C_BOARD_INFO("tsc2007", 0x48),
> > - .type = "tsc2007",
> > - .platform_data = &tsc2007_info,
> > - /*.irq is selected on ap4evb_init */
> > -};
> > -
> > -/* I2C */
> > -static struct i2c_board_info i2c0_devices[] = {
> > - {
> > - I2C_BOARD_INFO("ak4643", 0x13),
> > - },
> > -};
> > -
> > -static struct i2c_board_info i2c1_devices[] = {
> > - {
> > - I2C_BOARD_INFO("r2025sd", 0x32),
> > - },
> > -};
> > -
> > -
> > -static const struct pinctrl_map ap4evb_pinctrl_map[] = {
> > - /* CEU */
> > - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
> > - "ceu_clk_0", "ceu"),
> > - /* FSIA (AK4643) */
> > - PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
> > - "fsia_sclk_in", "fsia"),
> > - PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
> > - "fsia_data_in", "fsia"),
> > - PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
> > - "fsia_data_out", "fsia"),
> > - /* FSIB (HDMI) */
> > - PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372",
> > - "fsib_mclk_in", "fsib"),
> > - /* HDMI */
> > - PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-sh7372",
> > - "hdmi", "hdmi"),
> > - /* KEYSC */
> > - PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc", "pfc-sh7372",
> > - "keysc_in04_0", "keysc"),
> > - PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc", "pfc-sh7372",
> > - "keysc_out5", "keysc"),
> > -#ifndef CONFIG_AP4EVB_QHD
> > - /* LCDC */
> > - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
> > - "lcd_data18", "lcd"),
> > - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
> > - "lcd_sync", "lcd"),
> > -#endif
> > - /* MMCIF */
> > - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
> > - "mmc0_data8_0", "mmc0"),
> > - PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
> > - "mmc0_ctrl_0", "mmc0"),
> > - /* SCIFA0 */
> > - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-sh7372",
> > - "scifa0_data", "scifa0"),
> > - /* SDHI0 */
> > - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
> > - "sdhi0_data4", "sdhi0"),
> > - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
> > - "sdhi0_ctrl", "sdhi0"),
> > - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
> > - "sdhi0_cd", "sdhi0"),
> > - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
> > - "sdhi0_wp", "sdhi0"),
> > - /* SDHI1 */
> > - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
> > - "sdhi1_data4", "sdhi1"),
> > - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
> > - "sdhi1_ctrl", "sdhi1"),
> > - /* SMSC911X */
> > - PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
> > - "bsc_cs5a", "bsc"),
> > - PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
> > - "intc_irq6_0", "intc"),
> > - /* TSC2007 */
> > -#ifdef CONFIG_AP4EVB_QHD
> > - PIN_MAP_MUX_GROUP_DEFAULT("1-0048", "pfc-sh7372",
> > - "intc_irq28_0", "intc"),
> > -#else /* WVGA */
> > - PIN_MAP_MUX_GROUP_DEFAULT("1-0048", "pfc-sh7372",
> > - "intc_irq7_0", "intc"),
> > -#endif
> > - /* USBHS1 */
> > - PIN_MAP_MUX_GROUP_DEFAULT("r8a66597_hcd.1", "pfc-sh7372",
> > - "usb1_vbus", "usb1"),
> > - PIN_MAP_MUX_GROUP_DEFAULT("r8a66597_hcd.1", "pfc-sh7372",
> > - "usb1_otg_id_0", "usb1"),
> > - PIN_MAP_MUX_GROUP_DEFAULT("r8a66597_hcd.1", "pfc-sh7372",
> > - "usb1_otg_ctrl_0", "usb1"),
> > -};
> > -
> > -#define GPIO_PORT9CR IOMEM(0xE6051009)
> > -#define GPIO_PORT10CR IOMEM(0xE605100A)
> > -#define USCCR1 IOMEM(0xE6058144)
> > -static void __init ap4evb_init(void)
> > -{
> > - struct pm_domain_device domain_devices[] = {
> > - { "A4LC", &lcdc1_device, },
> > - { "A4LC", &lcdc_device, },
> > - { "A4MP", &fsi_device, },
> > - { "A3SP", &sh_mmcif_device, },
> > - { "A3SP", &sdhi0_device, },
> > - { "A3SP", &sdhi1_device, },
> > - { "A4R", &ceu_device, },
> > - };
> > - u32 srcr4;
> > - struct clk *clk;
> > -
> > - regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
> > - ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
> > - regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
> > - ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
> > - regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
> > -
> > - /* External clock source */
> > - clk_set_rate(&sh7372_dv_clki_clk, 27000000);
> > -
> > - pinctrl_register_mappings(ap4evb_pinctrl_map,
> > - ARRAY_SIZE(ap4evb_pinctrl_map));
> > - sh7372_pinmux_init();
> > -
> > - /* enable Debug switch (S6) */
> > - gpio_request_one(32, GPIOF_IN | GPIOF_EXPORT, NULL);
> > - gpio_request_one(33, GPIOF_IN | GPIOF_EXPORT, NULL);
> > - gpio_request_one(34, GPIOF_IN | GPIOF_EXPORT, NULL);
> > - gpio_request_one(35, GPIOF_IN | GPIOF_EXPORT, NULL);
> > -
> > - /* setup USB phy */
> > - __raw_writew(0x8a0a, IOMEM(0xE6058130)); /* USBCR4 */
> > -
> > - /* FSI2 port A (ak4643) */
> > - gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
> > -
> > - gpio_request(9, NULL);
> > - gpio_request(10, NULL);
> > - gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */
> > - gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
> > -
> > - /* card detect pin for MMC slot (CN7) */
> > - gpio_request_one(41, GPIOF_IN, NULL);
> > -
> > - /* FSI2 port B (HDMI) */
> > - __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
> > -
> > - /* set SPU2 clock to 119.6 MHz */
> > - clk = clk_get(NULL, "spu_clk");
> > - if (!IS_ERR(clk)) {
> > - clk_set_rate(clk, clk_round_rate(clk, 119600000));
> > - clk_put(clk);
> > - }
> > -
> > - /*
> > - * set irq priority, to avoid sound chopping
> > - * when NFS rootfs is used
> > - * FSI(3) > SMSC911X(2)
> > - */
> > - intc_set_priority(IRQ_FSI, 3);
> > -
> > - i2c_register_board_info(0, i2c0_devices,
> > - ARRAY_SIZE(i2c0_devices));
> > -
> > - i2c_register_board_info(1, i2c1_devices,
> > - ARRAY_SIZE(i2c1_devices));
> > -
> > -#ifdef CONFIG_AP4EVB_QHD
> > -
> > - /*
> > - * For QHD Panel (MIPI-DSI, CONFIG_AP4EVB_QHD=y) and
> > - * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON.
> > - */
> > -
> > - /* enable TouchScreen */
> > - irq_set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW);
> > -
> > - tsc_device.irq = IRQ28;
> > - i2c_register_board_info(1, &tsc_device, 1);
> > -
> > - /* LCDC0 */
> > - lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
> > - lcdc_info.ch[0].interface_type = RGB24;
> > - lcdc_info.ch[0].clock_divider = 1;
> > - lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL;
> > - lcdc_info.ch[0].panel_cfg.width = 44;
> > - lcdc_info.ch[0].panel_cfg.height = 79;
> > -
> > - platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices));
> > -
> > -#else
> > - /*
> > - * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and
> > - * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF.
> > - */
> > - gpio_request_one(189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */
> > - gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
> > -
> > - lcdc_info.clock_source = LCDC_CLK_BUS;
> > - lcdc_info.ch[0].interface_type = RGB18;
> > - lcdc_info.ch[0].clock_divider = 3;
> > - lcdc_info.ch[0].flags = 0;
> > - lcdc_info.ch[0].panel_cfg.width = 152;
> > - lcdc_info.ch[0].panel_cfg.height = 91;
> > -
> > - /* enable TouchScreen */
> > - irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
> > -
> > - tsc_device.irq = IRQ7;
> > - i2c_register_board_info(0, &tsc_device, 1);
> > -#endif /* CONFIG_AP4EVB_QHD */
> > -
> > - /* CEU */
> > -
> > - /*
> > - * TODO: reserve memory for V4L2 DMA buffers, when a suitable API
> > - * becomes available
> > - */
> > -
> > - /* MIPI-CSI stuff */
> > - clk = clk_get(NULL, "vck1_clk");
> > - if (!IS_ERR(clk)) {
> > - clk_set_rate(clk, clk_round_rate(clk, 13000000));
> > - clk_enable(clk);
> > - clk_put(clk);
> > - }
> > -
> > - sh7372_add_standard_devices();
> > -
> > - /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
> > -#define SRCR4 IOMEM(0xe61580bc)
> > - srcr4 = __raw_readl(SRCR4);
> > - __raw_writel(srcr4 | (1 << 13), SRCR4);
> > - udelay(50);
> > - __raw_writel(srcr4 & ~(1 << 13), SRCR4);
> > -
> > - platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
> > -
> > - rmobile_add_devices_to_domains(domain_devices,
> > - ARRAY_SIZE(domain_devices));
> > -
> > - hdmi_init_pm_clock();
> > - sh7372_pm_init();
> > - pm_clk_add(&fsi_device.dev, "spu2");
> > - pm_clk_add(&lcdc1_device.dev, "hdmi");
> > -}
> > -
> > -MACHINE_START(AP4EVB, "ap4evb")
> > - .map_io = sh7372_map_io,
> > - .init_early = sh7372_add_early_devices,
> > - .init_irq = sh7372_init_irq,
> > - .handle_irq = shmobile_handle_irq_intc,
> > - .init_machine = ap4evb_init,
> > - .init_late = sh7372_pm_init_late,
> > - .init_time = sh7372_earlytimer_init,
> > -MACHINE_END
> > diff --git a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
> > deleted file mode 100644
> > index 9f134df..0000000
> > --- a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
> > +++ /dev/null
> > @@ -1,93 +0,0 @@
> > -LIST "partner-jet-setup.txt"
> > -LIST "(C) Copyright 2010 Renesas Solutions Corp"
> > -LIST "Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>"
> > -
> > -LIST "RWT Setting"
> > -EW 0xE6020004, 0xA500
> > -EW 0xE6030004, 0xA500
> > -
> > -LIST "GPIO Setting"
> > -EB 0xE6051013, 0xA2
> > -
> > -LIST "CPG"
> > -ED 0xE61500C0, 0x00000002
> > -
> > -WAIT 1, 0xFE40009C
> > -
> > -LIST "FRQCR"
> > -ED 0xE6150000, 0x2D1305C3
> > -ED 0xE61500E0, 0x9E40358E
> > -ED 0xE6150004, 0x80331050
> > -
> > -WAIT 1, 0xFE40009C
> > -
> > -ED 0xE61500E4, 0x00002000
> > -
> > -WAIT 1, 0xFE40009C
> > -
> > -LIST "PLL"
> > -ED 0xE6150028, 0x00004000
> > -
> > -WAIT 1, 0xFE40009C
> > -
> > -ED 0xE615002C, 0x93000040
> > -
> > -WAIT 1, 0xFE40009C
> > -
> > -LIST "SUB/USBClk"
> > -ED 0xE6150080, 0x00000180
> > -
> > -LIST "BSC"
> > -ED 0xFEC10000, 0x00E0001B
> > -
> > -LIST "SBSC1"
> > -ED 0xFE400354, 0x01AD8000
> > -ED 0xFE400354, 0x01AD8001
> > -
> > -WAIT 5, 0xFE40009C
> > -
> > -ED 0xFE400008, 0xBCC90151
> > -ED 0xFE400040, 0x41774113
> > -ED 0xFE400044, 0x2712E229
> > -ED 0xFE400048, 0x20C18505
> > -ED 0xFE40004C, 0x00110209
> > -ED 0xFE400010, 0x00000087
> > -
> > -WAIT 30, 0xFE40009C
> > -
> > -ED 0xFE400084, 0x0000003F
> > -EB 0xFE500000, 0x00
> > -
> > -WAIT 5, 0xFE40009C
> > -
> > -ED 0xFE400084, 0x0000FF0A
> > -EB 0xFE500000, 0x00
> > -
> > -WAIT 1, 0xFE40009C
> > -
> > -ED 0xFE400084, 0x00002201
> > -EB 0xFE500000, 0x00
> > -ED 0xFE400084, 0x00000302
> > -EB 0xFE500000, 0x00
> > -EB 0xFE5C0000, 0x00
> > -ED 0xFE400008, 0xBCC90159
> > -ED 0xFE40008C, 0x88800004
> > -ED 0xFE400094, 0x00000004
> > -ED 0xFE400028, 0xA55A0032
> > -ED 0xFE40002C, 0xA55A000C
> > -ED 0xFE400020, 0xA55A2048
> > -ED 0xFE400008, 0xBCC90959
> > -
> > -LIST "Change CPGA setting"
> > -ED 0xE61500E0, 0x9E40352E
> > -ED 0xE6150004, 0x80331050
> > -
> > -WAIT 1, 0xFE40009C
> > -
> > -ED 0xFE400354, 0x01AD8002
> > -
> > -LIST "SCIF0 - Serial port for earlyprintk"
> > -EB 0xE6053098, 0xe1
> > -EW 0xE6C40000, 0x0000
> > -EB 0xE6C40004, 0x19
> > -EW 0xE6C40008, 0x0030
> > diff --git a/arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h b/arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h
> > deleted file mode 100644
> > index db59fdb..0000000
> > --- a/arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h
> > +++ /dev/null
> > @@ -1,29 +0,0 @@
> > -#ifndef MMC_AP4EB_H
> > -#define MMC_AP4EB_H
> > -
> > -#define PORT185CR (void __iomem *)0xe60520b9
> > -#define PORT186CR (void __iomem *)0xe60520ba
> > -#define PORT187CR (void __iomem *)0xe60520bb
> > -#define PORT188CR (void __iomem *)0xe60520bc
> > -
> > -#define PORTR191_160DR (void __iomem *)0xe6056014
> > -
> > -static inline void mmc_init_progress(void)
> > -{
> > - /* Initialise LEDS1-4
> > - * registers: PORT185CR-PORT188CR (LED1-LED4 Control)
> > - * value: 0x10 - enable output
> > - */
> > - __raw_writeb(0x10, PORT185CR);
> > - __raw_writeb(0x10, PORT186CR);
> > - __raw_writeb(0x10, PORT187CR);
> > - __raw_writeb(0x10, PORT188CR);
> > -}
> > -
> > -static inline void mmc_update_progress(int n)
> > -{
> > - __raw_writel((__raw_readl(PORTR191_160DR) & ~(0xf << 25)) |
> > - (1 << (25 + n)), PORTR191_160DR);
> > -}
> > -
> > -#endif /* MMC_AP4EB_H */
> > diff --git a/arch/arm/mach-shmobile/include/mach/mmc.h b/arch/arm/mach-shmobile/include/mach/mmc.h
> > index 21a59db..e979b8f 100644
> > --- a/arch/arm/mach-shmobile/include/mach/mmc.h
> > +++ b/arch/arm/mach-shmobile/include/mach/mmc.h
> > @@ -7,9 +7,7 @@
> > *
> > **************************************************/
> >
> > -#ifdef CONFIG_MACH_AP4EVB
> > -#include "mach/mmc-ap4eb.h"
> > -#elif defined(CONFIG_MACH_MACKEREL)
> > +#ifdef CONFIG_MACH_MACKEREL
> > #include "mach/mmc-mackerel.h"
> > #else
> > #error "unsupported board."
> > diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
> > index 308b5cf..f2d8744 100644
> > --- a/arch/arm/mach-shmobile/include/mach/zboot.h
> > +++ b/arch/arm/mach-shmobile/include/mach/zboot.h
> > @@ -10,11 +10,7 @@
> > *
> > **************************************************/
> >
> > -#ifdef CONFIG_MACH_AP4EVB
> > -#define MACH_TYPE MACH_TYPE_AP4EVB
> > -#define MEMORY_START 0x40000000
> > -#include "mach/head-ap4evb.txt"
> > -#elif defined(CONFIG_MACH_MACKEREL)
> > +#ifdef CONFIG_MACH_MACKEREL
> > #define MACH_TYPE MACH_TYPE_MACKEREL
> > #define MEMORY_START 0x40000000
> > #include "mach/head-mackerel.txt"
> > --
> > 1.8.2.1
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
> ---
> Guennadi Liakhovetski, Ph.D.
> Freelance Open-Source Software Developer
> http://www.open-technology.de/
>
More information about the linux-arm-kernel
mailing list