[PATCH 5/9] ARM: dtsi: imx6qdl-sabresd: add a fixed regulator for WM8962

[Nicolin Chen]

On Sabre SD, system controls WM8962 power by pulling up/down GPIO_4_10,
so add a regulator controled by GPIO_4_10 for WM8962.

Signed-off-by: Nicolin Chen <b42378 at freescale.com>
---
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index e21f6a8..13af158 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -26,6 +26,13 @@
 			gpio = <&gpio3 22 0>;
 			enable-active-high;
 		};
+
+		reg_audio: 8962_supply {
+			compatible = "regulator-fixed";
+			regulator-name = "8962-SUPPLY";
+			gpio = <&gpio4 10 0>;
+			enable-active-high;
+		};
 	};
 
 	gpio-keys {
-- 
1.7.1