[PATCH v4 2/6] clk: samsung: Add support to register rate_table for PLL3xxx
Tomasz Figa
tomasz.figa at gmail.com
Wed Jun 12 17:25:57 EDT 2013
Hi Doug,
On Wednesday 12 of June 2013 13:43:37 Doug Anderson wrote:
> Yadwinder,
>
> On Mon, Jun 3, 2013 at 8:09 AM, Yadwinder Singh Brar
>
> <yadi.brar at samsung.com> wrote:
> > This patch defines a common rate_table which will contain recommended
> > p, m, s, k values for supported rates that needs to be changed for
> > changing corresponding PLL's rate.
> >
> > Reviewed-by: Doug Anderson <dianders at chromium.org>
> > Signed-off-by: Yadwinder Singh Brar <yadi.brar at samsung.com>
> > ---
> >
> > drivers/clk/samsung/clk-exynos4.c | 8 +++---
> > drivers/clk/samsung/clk-exynos5250.c | 14 ++++++------
> > drivers/clk/samsung/clk-pll.c | 22 +++++++++++++++++++-
> > drivers/clk/samsung/clk-pll.h | 35
> > ++++++++++++++++++++++++++++++++- 4 files changed, 64 insertions(+),
> > 15 deletions(-)
>
> Using something like patman
> <http://git.denx.de/?p=u-boot.git;a=blob;f=tools/patman/README;hb=refs/h
> eads/master> would really help here so you could get some version
> history. I see it in 0/6 but that's a bit of a pain...
>
> Did you and Tomasz ever come to an agreement about whether the fin
> freq needs to be specified with the PMSK values?
No, not really.
But since
a) there seems to be no input from hardware guys,
b) we want to have this series merged,
c) otherwise this patch looks good
I think for now we can keep support for single input rate.
However, I think it would be resonable to recalculate all the output rates
from PLL equation at registration stage anyway just to eliminate any typos
or other errors in setting table, otherwise you might end up with having
different rate set in the PLL and different assumed by the driver.
Best regards,
Tomasz
> > diff --git a/drivers/clk/samsung/clk-exynos4.c
> > b/drivers/clk/samsung/clk-exynos4.c index ba33bc6..e02a342 100644
> > --- a/drivers/clk/samsung/clk-exynos4.c
> > +++ b/drivers/clk/samsung/clk-exynos4.c
> > @@ -1028,13 +1028,13 @@ void __init exynos4_clk_init(struct
> > device_node *np, enum exynos4_soc exynos4_so>
> > reg_base + VPLL_CON0,
> > pll_4650c);
> >
> > } else {
> >
> > apll = samsung_clk_register_pll35xx("fout_apll",
> > "fin_pll",
> >
> > - reg_base + APLL_LOCK);
> > + reg_base + APLL_LOCK, NULL,
> > 0);
> >
> > mpll = samsung_clk_register_pll35xx("fout_mpll",
> > "fin_pll",
> >
> > - reg_base + E4X12_MPLL_LOCK);
> > + reg_base + E4X12_MPLL_LOCK,
> > NULL, 0);>
> > epll = samsung_clk_register_pll36xx("fout_epll",
> > "fin_pll",
> >
> > - reg_base + EPLL_LOCK);
> > + reg_base + EPLL_LOCK, NULL,
> > 0);
> >
> > vpll = samsung_clk_register_pll36xx("fout_vpll",
> > "fin_pll",
> >
> > - reg_base + VPLL_LOCK);
> > + reg_base + VPLL_LOCK, NULL,
> > 0);
> >
> > }
> >
> > samsung_clk_add_lookup(apll, fout_apll);
> >
> > diff --git a/drivers/clk/samsung/clk-exynos5250.c
> > b/drivers/clk/samsung/clk-exynos5250.c index 687b580..ddf10ca 100644
> > --- a/drivers/clk/samsung/clk-exynos5250.c
> > +++ b/drivers/clk/samsung/clk-exynos5250.c
> > @@ -491,19 +491,19 @@ void __init exynos5250_clk_init(struct
> > device_node *np)>
> > ext_clk_match);
> >
> > apll = samsung_clk_register_pll35xx("fout_apll", "fin_pll",
> >
> > - reg_base);
> > + reg_base, NULL, 0);
> >
> > mpll = samsung_clk_register_pll35xx("fout_mpll", "fin_pll",
> >
> > - reg_base + 0x4000);
> > + reg_base + 0x4000, NULL, 0);
> >
> > bpll = samsung_clk_register_pll35xx("fout_bpll", "fin_pll",
> >
> > - reg_base + 0x20010);
> > + reg_base + 0x20010, NULL, 0);
> >
> > gpll = samsung_clk_register_pll35xx("fout_gpll", "fin_pll",
> >
> > - reg_base + 0x10050);
> > + reg_base + 0x10050, NULL, 0);
> >
> > cpll = samsung_clk_register_pll35xx("fout_cpll", "fin_pll",
> >
> > - reg_base + 0x10020);
> > + reg_base + 0x10020, NULL, 0);
> >
> > epll = samsung_clk_register_pll36xx("fout_epll", "fin_pll",
> >
> > - reg_base + 0x10030);
> > + reg_base + 0x10030, NULL, 0);
> >
> > vpll = samsung_clk_register_pll36xx("fout_vpll",
> > "mout_vpllsrc",
> >
> > - reg_base + 0x10040);
> > + reg_base + 0x10040, NULL, 0);
> >
> > samsung_clk_register_fixed_rate(exynos5250_fixed_rate_clks,
> >
> > ARRAY_SIZE(exynos5250_fixed_rate_clks));
> >
> > diff --git a/drivers/clk/samsung/clk-pll.c
> > b/drivers/clk/samsung/clk-pll.c index a7d8ad9..cba73a4 100644
> > --- a/drivers/clk/samsung/clk-pll.c
> > +++ b/drivers/clk/samsung/clk-pll.c
> > @@ -16,6 +16,8 @@
> >
> > struct samsung_clk_pll {
> >
> > struct clk_hw hw;
> > const void __iomem *base;
> >
> > + const struct samsung_pll_rate_table *rate_table;
> > + unsigned int rate_count;
> >
> > };
> >
> > #define to_clk_pll(_hw) container_of(_hw, struct samsung_clk_pll, hw)
> >
> > @@ -62,7 +64,9 @@ static const struct clk_ops samsung_pll35xx_clk_ops
> > = {>
> > };
> >
> > struct clk * __init samsung_clk_register_pll35xx(const char *name,
> >
> > - const char *pname, const void __iomem *base)
> > + const char *pname, const void __iomem *base,
> > + const struct samsung_pll_rate_table
> > *rate_table, + const unsigned int rate_count)
> >
> > {
> >
> > struct samsung_clk_pll *pll;
> > struct clk *clk;
> >
> > @@ -80,6 +84,12 @@ struct clk * __init
> > samsung_clk_register_pll35xx(const char *name,>
> > init.parent_names = &pname;
> > init.num_parents = 1;
> >
> > + if (rate_table && rate_count) {
> > + pll->rate_count = rate_count;
> > + pll->rate_table = kmemdup(rate_table, rate_count *
> > + sizeof(struct samsung_pll_rate_table),
> > GFP_KERNEL); + }
> > +
> >
> > pll->hw.init = &init;
> > pll->base = base;
> >
> > @@ -137,7 +147,9 @@ static const struct clk_ops
> > samsung_pll36xx_clk_ops = {>
> > };
> >
> > struct clk * __init samsung_clk_register_pll36xx(const char *name,
> >
> > - const char *pname, const void __iomem *base)
> > + const char *pname, const void __iomem *base,
> > + const struct samsung_pll_rate_table
> > *rate_table, + const unsigned int rate_count)
> >
> > {
> >
> > struct samsung_clk_pll *pll;
> > struct clk *clk;
> >
> > @@ -155,6 +167,12 @@ struct clk * __init
> > samsung_clk_register_pll36xx(const char *name,>
> > init.parent_names = &pname;
> > init.num_parents = 1;
> >
> > + if (rate_table && rate_count) {
> > + pll->rate_count = rate_count;
> > + pll->rate_table = kmemdup(rate_table, rate_count *
> > + sizeof(struct samsung_pll_rate_table),
> > GFP_KERNEL);
> To me I'd rather see the tables left as "init", not "init_data" and
> avoid the strdup(). The small amount of waste from multiple tables
> doesn't seem worth the extra allocation.
>
> ...but I don't really care much either way.
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-samsung-soc" in the body of a message to
> majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list