[PATCH V5 2/5] clk: samsung: register audio subsystem clocks using common clock framework
Padma Venkat
padma.kvr at gmail.com
Wed Jun 12 01:35:53 EDT 2013
Hi Mike,
On Wed, Jun 12, 2013 at 3:43 AM, Mike Turquette <mturquette at linaro.org> wrote:
> Quoting Padmavathi Venna (2013-06-04 05:28:07)
>> Audio subsystem is introduced in s5pv210 and exynos platforms.
>> This has seperate clock controller which can control i2s0 and
>> pcm0 clocks. This patch registers the audio subsystem clocks
>> with the common clock framework on Exynos family.
>>
>> Signed-off-by: Padmavathi Venna <padma.v at samsung.com>
>> Reviewed-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
>
> This looks good to me. You have my Ack, or I can take this patch
> through clk-next. Let me know what works for you.
I have to rework for one small change in one of the patch in the set.
So I will do that and put your ack and will repost the patches. After
that you can take the patches through clk-next.
Thanks
Padma
>
> Regards,
> Mike
>
>> ---
>> .../devicetree/bindings/clock/clk-exynos-audss.txt | 64 ++++++++++
>> drivers/clk/samsung/Makefile | 1 +
>> drivers/clk/samsung/clk-exynos-audss.c | 133 ++++++++++++++++++++
>> include/dt-bindings/clk/exynos-audss-clk.h | 25 ++++
>> 4 files changed, 223 insertions(+), 0 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
>> create mode 100644 drivers/clk/samsung/clk-exynos-audss.c
>> create mode 100644 include/dt-bindings/clk/exynos-audss-clk.h
>>
>> diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
>> new file mode 100644
>> index 0000000..a120180
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
>> @@ -0,0 +1,64 @@
>> +* Samsung Audio Subsystem Clock Controller
>> +
>> +The Samsung Audio Subsystem clock controller generates and supplies clocks
>> +to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock
>> +binding described here is applicable to all SoC's in Exynos family.
>> +
>> +Required Properties:
>> +
>> +- compatible: should be one of the following:
>> + - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs.
>> + - "samsung,exynos5250-audss-clock" - controller compatible with all Exynos5 SoCs.
>> +
>> +- reg: physical base address and length of the controller's register set.
>> +
>> +- #clock-cells: should be 1.
>> +
>> +The following is the list of clocks generated by the controller. Each clock is
>> +assigned an identifier and client nodes use this identifier to specify the
>> +clock which they consume. Some of the clocks are available only on a particular
>> +Exynos4 SoC and this is specified where applicable.
>> +
>> +Provided clocks:
>> +
>> +Clock ID SoC (if specific)
>> +-----------------------------------------------
>> +
>> +mout_audss 0
>> +mout_i2s 1
>> +dout_srp 2
>> +dout_aud_bus 3
>> +dout_i2s 4
>> +srp_clk 5
>> +i2s_bus 6
>> +sclk_i2s 7
>> +pcm_bus 8
>> +sclk_pcm 9
>> +
>> +Example 1: An example of a clock controller node is listed below.
>> +
>> +clock_audss: audss-clock-controller at 3810000 {
>> + compatible = "samsung,exynos5250-audss-clock";
>> + reg = <0x03810000 0x0C>;
>> + #clock-cells = <1>;
>> +};
>> +
>> +Example 2: I2S controller node that consumes the clock generated by the clock
>> + controller. Refer to the standard clock bindings for information
>> + about 'clocks' and 'clock-names' property.
>> +
>> +i2s0: i2s at 03830000 {
>> + compatible = "samsung,i2s-v5";
>> + reg = <0x03830000 0x100>;
>> + dmas = <&pdma0 10
>> + &pdma0 9
>> + &pdma0 8>;
>> + dma-names = "tx", "rx", "tx-sec";
>> + clocks = <&clock_audss EXYNOS_I2S_BUS>,
>> + <&clock_audss EXYNOS_I2S_BUS>,
>> + <&clock_audss EXYNOS_SCLK_I2S>,
>> + <&clock_audss EXYNOS_MOUT_AUDSS>,
>> + <&clock_audss EXYNOS_MOUT_I2S>;
>> + clock-names = "iis", "i2s_opclk0", "i2s_opclk1",
>> + "mout_audss", "mout_i2s";
>> +};
>> diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
>> index b7c232e..1876810 100644
>> --- a/drivers/clk/samsung/Makefile
>> +++ b/drivers/clk/samsung/Makefile
>> @@ -6,3 +6,4 @@ obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o
>> obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o
>> obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
>> obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
>> +obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o
>> diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c
>> new file mode 100644
>> index 0000000..9b1bbd5
>> --- /dev/null
>> +++ b/drivers/clk/samsung/clk-exynos-audss.c
>> @@ -0,0 +1,133 @@
>> +/*
>> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
>> + * Author: Padmavathi Venna <padma.v at samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * Common Clock Framework support for Audio Subsystem Clock Controller.
>> +*/
>> +
>> +#include <linux/clkdev.h>
>> +#include <linux/io.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/of_address.h>
>> +#include <linux/syscore_ops.h>
>> +
>> +#include <dt-bindings/clk/exynos-audss-clk.h>
>> +
>> +static DEFINE_SPINLOCK(lock);
>> +static struct clk **clk_table;
>> +static void __iomem *reg_base;
>> +static struct clk_onecell_data clk_data;
>> +
>> +#define ASS_CLK_SRC 0x0
>> +#define ASS_CLK_DIV 0x4
>> +#define ASS_CLK_GATE 0x8
>> +
>> +static unsigned long reg_save[][2] = {
>> + {ASS_CLK_SRC, 0},
>> + {ASS_CLK_DIV, 0},
>> + {ASS_CLK_GATE, 0},
>> +};
>> +
>> +/* list of all parent clock list */
>> +static const char *mout_audss_p[] = { "fin_pll", "fout_epll" };
>> +static const char *mout_i2s_p[] = { "mout_audss", "cdclk0", "sclk_audio0" };
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int exynos_audss_clk_suspend(void)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < ARRAY_SIZE(reg_save); i++)
>> + reg_save[i][1] = readl(reg_base + reg_save[i][0]);
>> +
>> + return 0;
>> +}
>> +
>> +static void exynos_audss_clk_resume(void)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < ARRAY_SIZE(reg_save); i++)
>> + writel(reg_save[i][1], reg_base + reg_save[i][0]);
>> +}
>> +
>> +static struct syscore_ops exynos_audss_clk_syscore_ops = {
>> + .suspend = exynos_audss_clk_suspend,
>> + .resume = exynos_audss_clk_resume,
>> +};
>> +#endif /* CONFIG_PM_SLEEP */
>> +
>> +/* register exynos_audss clocks */
>> +void __init exynos_audss_clk_init(struct device_node *np)
>> +{
>> + reg_base = of_iomap(np, 0);
>> + if (!reg_base) {
>> + pr_err("%s: failed to map audss registers\n", __func__);
>> + return;
>> + }
>> +
>> + clk_table = kzalloc(sizeof(struct clk *) * EXYNOS_AUDSS_MAX_CLKS,
>> + GFP_KERNEL);
>> + if (!clk_table) {
>> + pr_err("%s: could not allocate clk lookup table\n", __func__);
>> + return;
>> + }
>> +
>> + clk_data.clks = clk_table;
>> + clk_data.clk_num = EXYNOS_AUDSS_MAX_CLKS;
>> + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
>> +
>> + clk_table[EXYNOS_MOUT_AUDSS] = clk_register_mux(NULL, "mout_audss",
>> + mout_audss_p, ARRAY_SIZE(mout_audss_p), 0,
>> + reg_base + ASS_CLK_SRC, 0, 1, 0, &lock);
>> +
>> + clk_table[EXYNOS_MOUT_I2S] = clk_register_mux(NULL, "mout_i2s",
>> + mout_i2s_p, ARRAY_SIZE(mout_i2s_p), 0,
>> + reg_base + ASS_CLK_SRC, 2, 2, 0, &lock);
>> +
>> + clk_table[EXYNOS_DOUT_SRP] = clk_register_divider(NULL, "dout_srp",
>> + "mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4,
>> + 0, &lock);
>> +
>> + clk_table[EXYNOS_DOUT_AUD_BUS] = clk_register_divider(NULL,
>> + "dout_aud_bus", "dout_srp", 0,
>> + reg_base + ASS_CLK_DIV, 4, 4, 0, &lock);
>> +
>> + clk_table[EXYNOS_DOUT_I2S] = clk_register_divider(NULL, "dout_i2s",
>> + "mout_i2s", 0, reg_base + ASS_CLK_DIV, 8, 4, 0,
>> + &lock);
>> +
>> + clk_table[EXYNOS_SRP_CLK] = clk_register_gate(NULL, "srp_clk",
>> + "dout_srp", CLK_SET_RATE_PARENT,
>> + reg_base + ASS_CLK_GATE, 0, 0, &lock);
>> +
>> + clk_table[EXYNOS_I2S_BUS] = clk_register_gate(NULL, "i2s_bus",
>> + "dout_aud_bus", CLK_SET_RATE_PARENT,
>> + reg_base + ASS_CLK_GATE, 2, 0, &lock);
>> +
>> + clk_table[EXYNOS_SCLK_I2S] = clk_register_gate(NULL, "sclk_i2s",
>> + "dout_i2s", CLK_SET_RATE_PARENT,
>> + reg_base + ASS_CLK_GATE, 3, 0, &lock);
>> +
>> + clk_table[EXYNOS_PCM_BUS] = clk_register_gate(NULL, "pcm_bus",
>> + "sclk_pcm", CLK_SET_RATE_PARENT,
>> + reg_base + ASS_CLK_GATE, 4, 0, &lock);
>> +
>> + clk_table[EXYNOS_SCLK_PCM] = clk_register_gate(NULL, "sclk_pcm",
>> + "div_pcm0", CLK_SET_RATE_PARENT,
>> + reg_base + ASS_CLK_GATE, 5, 0, &lock);
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> + register_syscore_ops(&exynos_audss_clk_syscore_ops);
>> +#endif
>> +
>> + pr_info("Exynos: Audss: clock setup completed\n");
>> +}
>> +CLK_OF_DECLARE(exynos4210_audss_clk, "samsung,exynos4210-audss-clock",
>> + exynos_audss_clk_init);
>> +CLK_OF_DECLARE(exynos5250_audss_clk, "samsung,exynos5250-audss-clock",
>> + exynos_audss_clk_init);
>> diff --git a/include/dt-bindings/clk/exynos-audss-clk.h b/include/dt-bindings/clk/exynos-audss-clk.h
>> new file mode 100644
>> index 0000000..8279f42
>> --- /dev/null
>> +++ b/include/dt-bindings/clk/exynos-audss-clk.h
>> @@ -0,0 +1,25 @@
>> +/*
>> + * This header provides constants for Samsung audio subsystem
>> + * clock controller.
>> + *
>> + * The constants defined in this header are being used in dts
>> + * and exynos audss driver.
>> + */
>> +
>> +#ifndef _DT_BINDINGS_CLK_EXYNOS_AUDSS_H
>> +#define _DT_BINDINGS_CLK_EXYNOS_AUDSS_H
>> +
>> +#define EXYNOS_MOUT_AUDSS 0
>> +#define EXYNOS_MOUT_I2S 1
>> +#define EXYNOS_DOUT_SRP 2
>> +#define EXYNOS_DOUT_AUD_BUS 3
>> +#define EXYNOS_DOUT_I2S 4
>> +#define EXYNOS_SRP_CLK 5
>> +#define EXYNOS_I2S_BUS 6
>> +#define EXYNOS_SCLK_I2S 7
>> +#define EXYNOS_PCM_BUS 8
>> +#define EXYNOS_SCLK_PCM 9
>> +
>> +#define EXYNOS_AUDSS_MAX_CLKS 10
>> +
>> +#endif
>> --
>> 1.7.4.4
More information about the linux-arm-kernel
mailing list