[PATCH 3/3] ARM: dts: OMAP3: Use MTD constants for OMAP3 boards

[Javier Martinez Canillas]

On 06/11/2013 04:48 PM, Florian Vaussard wrote:
> Use the MTD constants for NAND and OneNAND nodes used in OMAP3
> DTS.
> 
> Signed-off-by: Florian Vaussard <florian.vaussard at epfl.ch>
> ---
>  arch/arm/boot/dts/omap3-devkit8000.dts |   10 +++++-----
>  arch/arm/boot/dts/omap3-igep0020.dts   |   10 +++++-----
>  arch/arm/boot/dts/omap3-igep0030.dts   |   10 +++++-----
>  arch/arm/boot/dts/omap3430-sdp.dts     |   28 ++++++++++++++--------------
>  4 files changed, 29 insertions(+), 29 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
> index 5be71b1..08699cb 100644
> --- a/arch/arm/boot/dts/omap3-devkit8000.dts
> +++ b/arch/arm/boot/dts/omap3-devkit8000.dts
> @@ -143,27 +143,27 @@
>  
>  		x-loader at 0 {
>  			label = "X-Loader";
> -			reg = <0 0x80000>;
> +			reg = <(0 * SZ_128K) (4 * SZ_128K)>;
>  		};
>  
>  		bootloaders at 80000 {
>  			label = "U-Boot";
> -			reg = <0x80000 0x1e0000>;
> +			reg = <(4 * SZ_128K) (15 * SZ_128K)>;
>  		};
>  
>  		bootloaders_env at 260000 {
>  			label = "U-Boot Env";
> -			reg = <0x260000 0x20000>;
> +			reg = <(19 * SZ_128K) (1 * SZ_128K)>;
>  		};
>  
>  		kernel at 280000 {
>  			label = "Kernel";
> -			reg = <0x280000 0x400000>;
> +			reg = <(20 * SZ_128K) (32 * SZ_128K)>;
>  		};
>  
>  		filesystem at 680000 {
>  			label = "File System";
> -			reg = <0x680000 0xf980000>;
> +			reg = <(52 * SZ_128K) MTDPART_SIZ_FULL>;
>  		};
>  	};
>  };
> diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
> index e8c4828..3476b3c 100644
> --- a/arch/arm/boot/dts/omap3-igep0020.dts
> +++ b/arch/arm/boot/dts/omap3-igep0020.dts
> @@ -97,23 +97,23 @@
>  
>  		partition at 0 {
>  			label = "SPL";
> -			reg = <0 0x100000>;
> +			reg = <(0 * SZ_256K) (4 * SZ_256K)>;
>  		};
>  		partition at 0x80000 {
>  			label = "U-Boot";
> -			reg = <0x100000 0x180000>;
> +			reg = <(4 * SZ_256K) (6 * SZ_256K)>;
>  		};
>  		partition at 0x1c0000 {
>  			label = "Environment";
> -			reg = <0x280000 0x100000>;
> +			reg = <(10 * SZ_256K) (4 * SZ_256K)>;
>  		};
>  		partition at 0x280000 {
>  			label = "Kernel";
> -			reg = <0x380000 0x300000>;
> +			reg = <(14 * SZ_256K) (12 * SZ_256K)>;
>  		};
>  		partition at 0x780000 {
>  			label = "Filesystem";
> -			reg = <0x680000 0x1f980000>;
> +			reg = <(26 * SZ_256K) MTDPART_SIZ_FULL>;
>  		};
>  	};
>  
> diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
> index 644d053..e4f078c 100644
> --- a/arch/arm/boot/dts/omap3-igep0030.dts
> +++ b/arch/arm/boot/dts/omap3-igep0030.dts
> @@ -72,23 +72,23 @@
>  
>  		partition at 0 {
>  			label = "SPL";
> -			reg = <0 0x100000>;
> +			reg = <(0 * SZ_256K) (4 * SZ_256K)>;
>  		};
>  		partition at 0x80000 {
>  			label = "U-Boot";
> -			reg = <0x100000 0x180000>;
> +			reg = <(4 * SZ_256K) (6 * SZ_256K)>;
>  		};
>  		partition at 0x1c0000 {
>  			label = "Environment";
> -			reg = <0x280000 0x100000>;
> +			reg = <(10 * SZ_256K) (4 * SZ_256K)>;
>  		};
>  		partition at 0x280000 {
>  			label = "Kernel";
> -			reg = <0x380000 0x300000>;
> +			reg = <(14 * SZ_256K) (12 * SZ_256K)>;
>  		};
>  		partition at 0x780000 {
>  			label = "Filesystem";
> -			reg = <0x680000 0x1f980000>;
> +			reg = <(26 * SZ_256K) MTDPART_SIZ_FULL>;
>  		};
>  	};
>  };

Hi Florian,

I don't have access to my IGEP board so I can test it right now but the patch
looks good to me.

In fact I wanted to use MTDPART_SIZ_FULL when added the NAND nodes since not all
IGEP boards have 512MB flash but I didn't know that a value of 0 meant that.

So thanks a lot for doing this!

Acked-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>