[PATCH 20/33 v2] clk: ux500: Add Device Tree support for the PRCC Peripheral clock
Lee Jones
lee.jones at linaro.org
Tue Jun 11 07:51:40 EDT 2013
This patch enables clocks to be specified from Device Tree via phandles
to the "prcc-periph-clock" node.
Cc: Mike Turquette <mturquette at linaro.org>
Cc: Ulf Hansson <ulf.hansson at linaro.org>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c
index c8ebd19..ff02a26 100644
--- a/drivers/clk/ux500/u8500_clk.c
+++ b/drivers/clk/ux500/u8500_clk.c
@@ -15,10 +15,16 @@
#include <linux/platform_data/clk-ux500.h>
#include "clk.h"
+#define PRCC_NUM_PERIPH_CLUSTERS 6
+#define PRCC_PERIPHS_PER_CLUSTER 32
+
static struct clk *prcmu_clk[PRCMU_NUM_CLKS];
+static struct clk *prcc_pclk[(PRCC_NUM_PERIPH_CLUSTERS + 1) * PRCC_PERIPHS_PER_CLUSTER];
#define PRCC_SHOW(clk, base, bit) \
clk[(base * PRCC_PERIPHS_PER_CLUSTER) + bit]
+#define PRCC_PCLK_STORE(clk, base, bit) \
+ prcc_pclk[(base * PRCC_PERIPHS_PER_CLUSTER) + bit] = clk
struct clk *ux500_twocell_get(struct of_phandle_args *clkspec, void *data)
{
@@ -288,143 +294,176 @@ void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
clk = clk_reg_prcc_pclk("p1_pclk0", "per1clk", clkrst1_base,
BIT(0), 0);
clk_register_clkdev(clk, "apb_pclk", "uart0");
+ PRCC_PCLK_STORE(clk, 1, 0);
clk = clk_reg_prcc_pclk("p1_pclk1", "per1clk", clkrst1_base,
BIT(1), 0);
clk_register_clkdev(clk, "apb_pclk", "uart1");
+ PRCC_PCLK_STORE(clk, 1, 1);
clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", clkrst1_base,
BIT(2), 0);
clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1");
+ PRCC_PCLK_STORE(clk, 1, 2);
clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", clkrst1_base,
BIT(3), 0);
clk_register_clkdev(clk, "apb_pclk", "msp0");
clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.0");
+ PRCC_PCLK_STORE(clk, 1, 3);
clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", clkrst1_base,
BIT(4), 0);
clk_register_clkdev(clk, "apb_pclk", "msp1");
clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.1");
+ PRCC_PCLK_STORE(clk, 1, 4);
clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", clkrst1_base,
BIT(5), 0);
clk_register_clkdev(clk, "apb_pclk", "sdi0");
+ PRCC_PCLK_STORE(clk, 1, 5);
clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", clkrst1_base,
BIT(6), 0);
clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2");
+ PRCC_PCLK_STORE(clk, 1, 6);
clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", clkrst1_base,
BIT(7), 0);
clk_register_clkdev(clk, NULL, "spi3");
+ PRCC_PCLK_STORE(clk, 1, 7);
clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", clkrst1_base,
BIT(8), 0);
clk_register_clkdev(clk, "apb_pclk", "slimbus0");
+ PRCC_PCLK_STORE(clk, 1, 8);
clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", clkrst1_base,
BIT(9), 0);
clk_register_clkdev(clk, NULL, "gpio.0");
clk_register_clkdev(clk, NULL, "gpio.1");
clk_register_clkdev(clk, NULL, "gpioblock0");
+ PRCC_PCLK_STORE(clk, 1, 9);
clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", clkrst1_base,
BIT(10), 0);
clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4");
+ PRCC_PCLK_STORE(clk, 1, 10);
clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", clkrst1_base,
BIT(11), 0);
clk_register_clkdev(clk, "apb_pclk", "msp3");
clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.3");
+ PRCC_PCLK_STORE(clk, 1, 11);
clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", clkrst2_base,
BIT(0), 0);
clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3");
+ PRCC_PCLK_STORE(clk, 2, 0);
clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", clkrst2_base,
BIT(1), 0);
clk_register_clkdev(clk, NULL, "spi2");
+ PRCC_PCLK_STORE(clk, 2, 1);
clk = clk_reg_prcc_pclk("p2_pclk2", "per2clk", clkrst2_base,
BIT(2), 0);
clk_register_clkdev(clk, NULL, "spi1");
+ PRCC_PCLK_STORE(clk, 2, 2);
clk = clk_reg_prcc_pclk("p2_pclk3", "per2clk", clkrst2_base,
BIT(3), 0);
clk_register_clkdev(clk, NULL, "pwl");
+ PRCC_PCLK_STORE(clk, 2, 3);
clk = clk_reg_prcc_pclk("p2_pclk4", "per2clk", clkrst2_base,
BIT(4), 0);
clk_register_clkdev(clk, "apb_pclk", "sdi4");
+ PRCC_PCLK_STORE(clk, 2, 4);
clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", clkrst2_base,
BIT(5), 0);
clk_register_clkdev(clk, "apb_pclk", "msp2");
clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.2");
+ PRCC_PCLK_STORE(clk, 2, 5);
clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", clkrst2_base,
BIT(6), 0);
clk_register_clkdev(clk, "apb_pclk", "sdi1");
+ PRCC_PCLK_STORE(clk, 2, 6);
clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", clkrst2_base,
BIT(7), 0);
clk_register_clkdev(clk, "apb_pclk", "sdi3");
+ PRCC_PCLK_STORE(clk, 2, 7);
clk = clk_reg_prcc_pclk("p2_pclk8", "per2clk", clkrst2_base,
BIT(8), 0);
clk_register_clkdev(clk, NULL, "spi0");
+ PRCC_PCLK_STORE(clk, 2, 8);
clk = clk_reg_prcc_pclk("p2_pclk9", "per2clk", clkrst2_base,
BIT(9), 0);
clk_register_clkdev(clk, "hsir_hclk", "ste_hsi.0");
+ PRCC_PCLK_STORE(clk, 2, 9);
clk = clk_reg_prcc_pclk("p2_pclk10", "per2clk", clkrst2_base,
BIT(10), 0);
clk_register_clkdev(clk, "hsit_hclk", "ste_hsi.0");
+ PRCC_PCLK_STORE(clk, 2, 10);
clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", clkrst2_base,
BIT(11), 0);
clk_register_clkdev(clk, NULL, "gpio.6");
clk_register_clkdev(clk, NULL, "gpio.7");
clk_register_clkdev(clk, NULL, "gpioblock1");
+ PRCC_PCLK_STORE(clk, 2, 1);
clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", clkrst2_base,
BIT(12), 0);
+ PRCC_PCLK_STORE(clk, 2, 12);
clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", clkrst3_base,
BIT(0), 0);
clk_register_clkdev(clk, "fsmc", NULL);
clk_register_clkdev(clk, NULL, "smsc911x");
+ PRCC_PCLK_STORE(clk, 3, 0);
clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", clkrst3_base,
BIT(1), 0);
clk_register_clkdev(clk, "apb_pclk", "ssp0");
+ PRCC_PCLK_STORE(clk, 3, 1);
clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", clkrst3_base,
BIT(2), 0);
clk_register_clkdev(clk, "apb_pclk", "ssp1");
+ PRCC_PCLK_STORE(clk, 3, 2);
clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", clkrst3_base,
BIT(3), 0);
clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0");
+ PRCC_PCLK_STORE(clk, 3, 3);
clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", clkrst3_base,
BIT(4), 0);
clk_register_clkdev(clk, "apb_pclk", "sdi2");
+ PRCC_PCLK_STORE(clk, 3, 4);
clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", clkrst3_base,
BIT(5), 0);
clk_register_clkdev(clk, "apb_pclk", "ske");
clk_register_clkdev(clk, "apb_pclk", "nmk-ske-keypad");
+ PRCC_PCLK_STORE(clk, 3, 5);
clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", clkrst3_base,
BIT(6), 0);
clk_register_clkdev(clk, "apb_pclk", "uart2");
+ PRCC_PCLK_STORE(clk, 3, 6);
clk = clk_reg_prcc_pclk("p3_pclk7", "per3clk", clkrst3_base,
BIT(7), 0);
clk_register_clkdev(clk, "apb_pclk", "sdi5");
+ PRCC_PCLK_STORE(clk, 3, 7);
clk = clk_reg_prcc_pclk("p3_pclk8", "per3clk", clkrst3_base,
BIT(8), 0);
@@ -433,48 +472,59 @@ void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
clk_register_clkdev(clk, NULL, "gpio.4");
clk_register_clkdev(clk, NULL, "gpio.5");
clk_register_clkdev(clk, NULL, "gpioblock2");
+ PRCC_PCLK_STORE(clk, 3, 8);
clk = clk_reg_prcc_pclk("p5_pclk0", "per5clk", clkrst5_base,
BIT(0), 0);
clk_register_clkdev(clk, "usb", "musb-ux500.0");
+ PRCC_PCLK_STORE(clk, 5, 0);
clk = clk_reg_prcc_pclk("p5_pclk1", "per5clk", clkrst5_base,
BIT(1), 0);
clk_register_clkdev(clk, NULL, "gpio.8");
clk_register_clkdev(clk, NULL, "gpioblock3");
+ PRCC_PCLK_STORE(clk, 5, 1);
clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", clkrst6_base,
BIT(0), 0);
clk_register_clkdev(clk, "apb_pclk", "rng");
+ PRCC_PCLK_STORE(clk, 6, 0);
clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", clkrst6_base,
BIT(1), 0);
clk_register_clkdev(clk, NULL, "cryp0");
clk_register_clkdev(clk, NULL, "cryp1");
+ PRCC_PCLK_STORE(clk, 6, 1);
clk = clk_reg_prcc_pclk("p6_pclk2", "per6clk", clkrst6_base,
BIT(2), 0);
clk_register_clkdev(clk, NULL, "hash0");
+ PRCC_PCLK_STORE(clk, 6, 2);
clk = clk_reg_prcc_pclk("p6_pclk3", "per6clk", clkrst6_base,
BIT(3), 0);
clk_register_clkdev(clk, NULL, "pka");
+ PRCC_PCLK_STORE(clk, 6, 3);
clk = clk_reg_prcc_pclk("p6_pclk4", "per6clk", clkrst6_base,
BIT(4), 0);
clk_register_clkdev(clk, NULL, "hash1");
+ PRCC_PCLK_STORE(clk, 6, 4);
clk = clk_reg_prcc_pclk("p6_pclk5", "per6clk", clkrst6_base,
BIT(5), 0);
clk_register_clkdev(clk, NULL, "cfgreg");
+ PRCC_PCLK_STORE(clk, 6, 5);
clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", clkrst6_base,
BIT(6), 0);
clk_register_clkdev(clk, "apb_pclk", "mtu0");
+ PRCC_PCLK_STORE(clk, 6, 6);
clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", clkrst6_base,
BIT(7), 0);
clk_register_clkdev(clk, "apb_pclk", "mtu1");
+ PRCC_PCLK_STORE(clk, 6, 7);
/* PRCC K-clocks
*
@@ -606,5 +656,7 @@ void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
clk_data.clk_num = ARRAY_SIZE(prcmu_clk);
of_clk_add_provider(child, of_clk_src_onecell_get, &clk_data);
}
+ if (!of_node_cmp(child->name, "prcc-periph-clock"))
+ of_clk_add_provider(child, ux500_twocell_get, prcc_pclk);
}
}
More information about the linux-arm-kernel
mailing list