[PATCH v2] mfd: vexpress: Make the driver optional for arm and arm64
Pawel Moll
pawel.moll at arm.com
Tue Jun 11 06:56:02 EDT 2013
The driver can be used on either arm or arm64 platforms, but
the latter doesn't have any platform-specific configuration
options, so it must be possible to manually enable the driver.
As the gpiolib is optional for arm64 arch, the gpio/led code
must be compiled conditionally.
Signed-off-by: Pawel Moll <pawel.moll at arm.com>
Acked-by: Catalin Marinas <catalin.marinas at arm.com>
---
drivers/mfd/Kconfig | 3 ++-
drivers/mfd/vexpress-sysreg.c | 10 ++++++++--
2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d54e985..6959b8d 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1144,7 +1144,8 @@ config MCP_UCB1200_TS
endmenu
config VEXPRESS_CONFIG
- bool
+ bool "ARM Versatile Express platform infrastructure"
+ depends on ARM || ARM64
help
Platform configuration infrastructure for the ARM Ltd.
Versatile Express.
diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
index 96a020b..981bef4 100644
--- a/drivers/mfd/vexpress-sysreg.c
+++ b/drivers/mfd/vexpress-sysreg.c
@@ -351,6 +351,8 @@ void __init vexpress_sysreg_of_early_init(void)
}
+#ifdef CONFIG_GPIOLIB
+
#define VEXPRESS_SYSREG_GPIO(_name, _reg, _value) \
[VEXPRESS_GPIO_##_name] = { \
.reg = _reg, \
@@ -445,6 +447,8 @@ struct gpio_led_platform_data vexpress_sysreg_leds_pdata = {
.leds = vexpress_sysreg_leds,
};
+#endif
+
static ssize_t vexpress_sysreg_sys_id_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -480,6 +484,9 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
setup_timer(&vexpress_sysreg_config_timer,
vexpress_sysreg_config_complete, 0);
+ vexpress_sysreg_dev = &pdev->dev;
+
+#ifdef CONFIG_GPIOLIB
vexpress_sysreg_gpio_chip.dev = &pdev->dev;
err = gpiochip_add(&vexpress_sysreg_gpio_chip);
if (err) {
@@ -490,11 +497,10 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
return err;
}
- vexpress_sysreg_dev = &pdev->dev;
-
platform_device_register_data(vexpress_sysreg_dev, "leds-gpio",
PLATFORM_DEVID_AUTO, &vexpress_sysreg_leds_pdata,
sizeof(vexpress_sysreg_leds_pdata));
+#endif
device_create_file(vexpress_sysreg_dev, &dev_attr_sys_id);
--
1.8.1.2
More information about the linux-arm-kernel
mailing list