[PATCH 1/3] ARM: dts: exynos4210: Add LCD related pinctrl entries

[Tushar Behera]

On 06/11/2013 12:00 AM, Tomasz Figa wrote:
> On Monday 10 of June 2013 09:40:43 Tushar Behera wrote:
>> On 06/08/2013 04:16 PM, Tomasz Figa wrote:
>>> Hi Tushar, Sachin,
>>>
>>> On Friday 07 of June 2013 16:37:13 Tushar Behera wrote:
>>>> From: Sachin Kamat <sachin.kamat at linaro.org>
>>>>
>>>> Adds pinctrl entries required by FIMD.
>>>>
>>>> Signed-off-by: Sachin Kamat <sachin.kamat at linaro.org>
>>>> Signed-off-by: Tushar Behera <tushar.behera at linaro.org>
>>>> ---
>>>>
>>>>  arch/arm/boot/dts/exynos4210-pinctrl.dtsi |   75
>>>>
>>>> +++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+)
>>>>
>>>> diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
>>>> b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index 55a2efb..d241726
>>>> 100644
>>>> --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
>>>> +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
>>>> @@ -330,6 +330,81 @@
>>>>
>>>>  			samsung,pin-pud = <3>;
>>>>  			samsung,pin-drv = <0>;
>>>>  		
>>>>  		};
>>>>
>>>> +
>>>> +		pwm0_out: pwm0-out {
>>>> +			samsung,pins = "gpd0-0";
>>>> +			samsung,pin-function = <2>;
>>>> +			samsung,pin-pud = <0>;
>>>> +			samsung,pin-drv = <0>;
>>>> +		};
>>>> +
>>>> +		pwm1_out: pwm1-out {
>>>> +			samsung,pins = "gpd0-1";
>>>> +			samsung,pin-function = <2>;
>>>> +			samsung,pin-pud = <0>;
>>>> +			samsung,pin-drv = <0>;
>>>> +		};
>>>
>>> Hmm, these two seem to be unrelated. Rebase error? :)
>>
>> Not a rebase error. pwm0_out needs to configured to get display on LCD.
> 
> Please split this into two separate patches than, one adding LCD pin 
> configuration nodes and one adding PWM pin configuration nodes.
> 
> Also I think it would be better to just define all available PWM outputs 
> not only first two. if you are already at adding PWM pin configurations.
> 

Sure.

> Thanks,
> Tomasz
> 

Thanks.

-- 
Tushar Behera