[PATCH 21/33] clk: ux500: Add Device Tree support for the PRCC Kernel clock
Ulf Hansson
ulf.hansson at linaro.org
Mon Jun 10 17:24:20 EDT 2013
On 6 June 2013 14:17, Lee Jones <lee.jones at linaro.org> wrote:
> This patch enables clocks to be specified from Device Tree via phandles
> to the "prcc-kernel-clock" node.
>
> Cc: Mike Turquette <mturquette at linaro.org>
> Cc: Ulf Hansson <ulf.hansson at linaro.org>
> Signed-off-by: Lee Jones <lee.jones at linaro.org>
Could you please fold this patch into a "common PRCC device tree
support" patch instead. Thus handling both P and K clocks in the same
patch.
That would probaby solve the missmatch of the macro definitions as
well. Like were did the PRCC_KCLK_STORE come from?
Kind regards
Ulf Hansson
> ---
> drivers/clk/ux500/u8500_clk.c | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c
> index 86de1a7..c3ed09c 100644
> --- a/drivers/clk/ux500/u8500_clk.c
> +++ b/drivers/clk/ux500/u8500_clk.c
> @@ -20,6 +20,7 @@
>
> static struct clk *prcmu_clk[PRCMU_NUM_CLKS];
> static struct clk *prcc_pclk[(PRCC_NUM_PERIPH_CLUSTERS + 1) * PRCC_PERIPHS_PER_CLUSTER];
> +static struct clk *prcc_kclk[(PRCC_NUM_PERIPH_CLUSTERS + 1) * PRCC_PERIPHS_PER_CLUSTER];
>
> #define PRCC_SHOW(clk, base, bit) \
> clk[(base * PRCC_PERIPHS_PER_CLUSTER) + bit]
> @@ -540,110 +541,136 @@ void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
> clk = clk_reg_prcc_kclk("p1_uart0_kclk", "uartclk",
> clkrst1_base, BIT(0), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "uart0");
> + PRCC_KCLK_STORE(clk, 1, 0);
>
> clk = clk_reg_prcc_kclk("p1_uart1_kclk", "uartclk",
> clkrst1_base, BIT(1), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "uart1");
> + PRCC_KCLK_STORE(clk, 1, 1);
>
> clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk",
> clkrst1_base, BIT(2), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "nmk-i2c.1");
> + PRCC_KCLK_STORE(clk, 1, 2);
>
> clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk",
> clkrst1_base, BIT(3), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "msp0");
> clk_register_clkdev(clk, NULL, "ux500-msp-i2s.0");
> + PRCC_KCLK_STORE(clk, 1, 3);
>
> clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk",
> clkrst1_base, BIT(4), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "msp1");
> clk_register_clkdev(clk, NULL, "ux500-msp-i2s.1");
> + PRCC_KCLK_STORE(clk, 1, 4);
>
> clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk",
> clkrst1_base, BIT(5), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "sdi0");
> + PRCC_KCLK_STORE(clk, 1, 5);
>
> clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk",
> clkrst1_base, BIT(6), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "nmk-i2c.2");
> + PRCC_KCLK_STORE(clk, 1, 6);
>
> clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk",
> clkrst1_base, BIT(8), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "slimbus0");
> + PRCC_KCLK_STORE(clk, 1, 8);
>
> clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk",
> clkrst1_base, BIT(9), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "nmk-i2c.4");
> + PRCC_KCLK_STORE(clk, 1, 9);
>
> clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk",
> clkrst1_base, BIT(10), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "msp3");
> clk_register_clkdev(clk, NULL, "ux500-msp-i2s.3");
> + PRCC_KCLK_STORE(clk, 1, 10);
>
> /* Periph2 */
> clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk",
> clkrst2_base, BIT(0), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "nmk-i2c.3");
> + PRCC_KCLK_STORE(clk, 2, 0);
>
> clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk",
> clkrst2_base, BIT(2), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "sdi4");
> + PRCC_KCLK_STORE(clk, 2, 2);
>
> clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk",
> clkrst2_base, BIT(3), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "msp2");
> clk_register_clkdev(clk, NULL, "ux500-msp-i2s.2");
> + PRCC_KCLK_STORE(clk, 2, 3);
>
> clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk",
> clkrst2_base, BIT(4), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "sdi1");
> + PRCC_KCLK_STORE(clk, 2, 4);
>
> clk = clk_reg_prcc_kclk("p2_sdi3_kclk", "sdmmcclk",
> clkrst2_base, BIT(5), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "sdi3");
> + PRCC_KCLK_STORE(clk, 2, 5);
>
> /* Note that rate is received from parent. */
> clk = clk_reg_prcc_kclk("p2_ssirx_kclk", "hsirxclk",
> clkrst2_base, BIT(6),
> CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
> + PRCC_KCLK_STORE(clk, 2, 6);
> +
> clk = clk_reg_prcc_kclk("p2_ssitx_kclk", "hsitxclk",
> clkrst2_base, BIT(7),
> CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
> + PRCC_KCLK_STORE(clk, 2, 7);
>
> /* Periph3 */
> clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk",
> clkrst3_base, BIT(1), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "ssp0");
> + PRCC_KCLK_STORE(clk, 3, 1);
>
> clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk",
> clkrst3_base, BIT(2), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "ssp1");
> + PRCC_KCLK_STORE(clk, 3, 2);
>
> clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk",
> clkrst3_base, BIT(3), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "nmk-i2c.0");
> + PRCC_KCLK_STORE(clk, 3, 3);
>
> clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk",
> clkrst3_base, BIT(4), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "sdi2");
> + PRCC_KCLK_STORE(clk, 3, 4);
>
> clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k",
> clkrst3_base, BIT(5), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "ske");
> clk_register_clkdev(clk, NULL, "nmk-ske-keypad");
> + PRCC_KCLK_STORE(clk, 3, 5);
>
> clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk",
> clkrst3_base, BIT(6), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "uart2");
> + PRCC_KCLK_STORE(clk, 3, 6);
>
> clk = clk_reg_prcc_kclk("p3_sdi5_kclk", "sdmmcclk",
> clkrst3_base, BIT(7), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "sdi5");
> + PRCC_KCLK_STORE(clk, 3, 7);
>
> /* Periph6 */
> clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk",
> clkrst6_base, BIT(0), CLK_SET_RATE_GATE);
> clk_register_clkdev(clk, NULL, "rng");
> + PRCC_KCLK_STORE(clk, 6, 0);
>
> if (of_have_populated_dt())
> np = of_find_matching_node(NULL, u8500_clk_of_match);
> @@ -660,5 +687,8 @@ void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
> }
> if (!of_node_cmp(child->name, "prcc-periph-clock"))
> of_clk_add_provider(child, ux500_twocell_get, prcc_pclk);
> +
> + if (!of_node_cmp(child->name, "prcc-kernel-clock"))
> + of_clk_add_provider(child, ux500_twocell_get, prcc_kclk);
> }
> }
> --
> 1.7.10.4
>
More information about the linux-arm-kernel
mailing list