[PATCH 4/4] ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap
Quadros, Roger
rogerq at ti.com
Mon Jun 10 08:31:54 EDT 2013
Hi Tony, (sorry, on Outlook web)
- compatible = "ti,omap4-padconf", "pinctrl-single";
+ compatible = "ti,omap4-padconf";
This change is not necessary if we make sure the pinctrl-single-omap driver
gets registered early enough, before the pinctrl devices are probed.
(e.g. subsys_initcall())
I've commented about this in the other patch.
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
________________________________________
From: Tony Lindgren [tony at atomide.com]
Sent: Friday, June 07, 2013 11:50 PM
To: linus.walleij at linaro.org
Cc: devicetree-discuss at lists.ozlabs.org; Haojian Zhuang; Ujfalusi, Peter; linux-omap at vger.kernel.org; linux-arm-kernel at lists.infradead.org; Quadros, Roger
Subject: [PATCH 4/4] ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap
Now pinctrl-single-omap can handle the wake-up events for us now
as long as the events are configured in the .dts files.
Done in collaboration with Roger Quadros <rogerq at ti.com>.
Cc: Haojian Zhuang <haojian.zhuang at gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi at ti.com>
Cc: devicetree-discuss at lists.ozlabs.org
Signed-off-by: Roger Quadros <rogerq at ti.com>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
arch/arm/boot/dts/omap3.dtsi | 4 ++--
arch/arm/boot/dts/omap4.dtsi | 4 ++--
arch/arm/boot/dts/omap5.dtsi | 4 ++--
arch/arm/mach-omap2/mux.c | 8 ++++++--
arch/arm/mach-omap2/pm34xx.c | 2 ++
arch/arm/mach-omap2/prm_common.c | 26 ++++++++++++++++++++++++++
6 files changed, 40 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 99ba6e1..847af56 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -94,7 +94,7 @@
};
omap3_pmx_core: pinmux at 48002030 {
- compatible = "ti,omap3-padconf", "pinctrl-single";
+ compatible = "ti,omap3-padconf";
reg = <0x48002030 0x05cc>;
#address-cells = <1>;
#size-cells = <0>;
@@ -103,7 +103,7 @@
};
omap3_pmx_wkup: pinmux at 0x48002a00 {
- compatible = "ti,omap3-padconf", "pinctrl-single";
+ compatible = "ti,omap3-padconf";
reg = <0x48002a00 0x5c>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 2a56428..2a4f099 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -107,7 +107,7 @@
};
omap4_pmx_core: pinmux at 4a100040 {
- compatible = "ti,omap4-padconf", "pinctrl-single";
+ compatible = "ti,omap4-padconf";
reg = <0x4a100040 0x0196>;
#address-cells = <1>;
#size-cells = <0>;
@@ -115,7 +115,7 @@
pinctrl-single,function-mask = <0x7fff>;
};
omap4_pmx_wkup: pinmux at 4a31e040 {
- compatible = "ti,omap4-padconf", "pinctrl-single";
+ compatible = "ti,omap4-padconf";
reg = <0x4a31e040 0x0038>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 3dd7ff8..5515d58 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -100,7 +100,7 @@
};
omap5_pmx_core: pinmux at 4a002840 {
- compatible = "ti,omap4-padconf", "pinctrl-single";
+ compatible = "ti,omap4-padconf";
reg = <0x4a002840 0x01b6>;
#address-cells = <1>;
#size-cells = <0>;
@@ -108,7 +108,7 @@
pinctrl-single,function-mask = <0x7fff>;
};
omap5_pmx_wkup: pinmux at 4ae0c840 {
- compatible = "ti,omap4-padconf", "pinctrl-single";
+ compatible = "ti,omap4-padconf";
reg = <0x4ae0c840 0x0038>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index f82cf87..48094b58 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -811,6 +811,12 @@ int __init omap_mux_late_init(void)
}
}
+ omap_mux_dbg_init();
+
+ /* see pinctrl-single-omap for the wake-up interrupt handling */
+ if (of_have_populated_dt())
+ return 0;
+
ret = request_irq(omap_prcm_event_to_irq("io"),
omap_hwmod_mux_handle_irq, IRQF_SHARED | IRQF_NO_SUSPEND,
"hwmod_io", omap_mux_late_init);
@@ -818,8 +824,6 @@ int __init omap_mux_late_init(void)
if (ret)
pr_warning("mux: Failed to setup hwmod io irq %d\n", ret);
- omap_mux_dbg_init();
-
return 0;
}
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c018593..9b19b14 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -172,6 +172,8 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
wkst = omap2_prm_read_mod_reg(module, wkst_off);
wkst &= ~ignore_bits;
c++;
+ if (c > 10)
+ break;
}
omap2_cm_write_mod_reg(iclk, module, iclk_off);
omap2_cm_write_mod_reg(fclk, module, fclk_off);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 228b850..b9af6a7 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -22,8 +22,10 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/platform_data/pinctrl-single-omap.h>
#include <linux/slab.h>
+#include "soc.h"
#include "prm2xxx_3xxx.h"
#include "prm2xxx.h"
#include "prm3xxx.h"
@@ -95,6 +97,7 @@ static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc)
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned int virtirq;
int nr_irq = prcm_irq_setup->nr_regs * 32;
+ int retries = 20;
/*
* If we are suspended, mask all interrupts from PRCM level,
@@ -136,6 +139,9 @@ static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc)
/* Serve normal events next */
for_each_set_bit(virtirq, pending, nr_irq)
generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
+
+ if (retries-- < 1)
+ break;
}
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
@@ -234,6 +240,15 @@ void omap_prcm_irq_complete(void)
prcm_irq_setup->restore_irqen(prcm_irq_setup->saved_mask);
}
+static struct pcs_omap_pdata pcs_pdata;
+
+static struct platform_device pinctrl_single_omap = {
+ .name = "pinctrl-single-omap-soc",
+ .dev = {
+ .platform_data = &pcs_pdata,
+ },
+};
+
/**
* omap_prcm_register_chain_handler - initializes the prcm chained interrupt
* handler based on provided parameters
@@ -322,6 +337,17 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
prcm_irq_chips[i] = gc;
}
+ if (of_have_populated_dt()) {
+ pcs_pdata.irq = omap_prcm_event_to_irq("io");
+ if (cpu_is_omap34xx())
+ pcs_pdata.reconfigure_io_chain =
+ omap3xxx_prm_reconfigure_io_chain;
+ else
+ pcs_pdata.reconfigure_io_chain =
+ omap44xx_prm_reconfigure_io_chain;
+ platform_device_register(&pinctrl_single_omap);
+ }
+
return 0;
err:
More information about the linux-arm-kernel
mailing list