[PATCH 2/3] ARM: dts: Add FIMD node to Origen4210 board

[Tushar Behera]

On 06/08/2013 04:19 PM, Tomasz Figa wrote:
> On Friday 07 of June 2013 16:37:14 Tushar Behera wrote:
>> From: Sachin Kamat <sachin.kamat at linaro.org>
>>
>> Added FIMD and display timing node to Origen4210 board.
>>
>> Signed-off-by: Sachin Kamat <sachin.kamat at linaro.org>
>> Signed-off-by: Tushar Behera <tushar.behera at linaro.org>
>> ---
>>  arch/arm/boot/dts/exynos4210-origen.dts |   21 +++++++++++++++++++++
>>  1 file changed, 21 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos4210-origen.dts
>> b/arch/arm/boot/dts/exynos4210-origen.dts index bcf8079..4c6c3cd 100644
>> --- a/arch/arm/boot/dts/exynos4210-origen.dts
>> +++ b/arch/arm/boot/dts/exynos4210-origen.dts
>> @@ -290,4 +290,25 @@
>>  			clock-frequency = <24000000>;
>>  		};
>>  	};
>> +
>> +	fimd at 11c00000 {
>> +		pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
> 
> Ahh, this would explain the two pwm pin groups from previous patch.
> 
> This seems somehow incorrect, though. AFAIK PWM outputs are not managed by 
> FIMD in any way.
> 

I couldn't find any better place to put the pwm0_out pin configurations.
Without configuring pwm0_out pins, display doesn't come up on the LCD.
Any suggestions?

>> +		pinctrl-names = "default";
>> +		status = "okay";
>> +	};
>> +
>> +	display-timings {
>> +		native-mode = <&timing0>;
>> +		timing0: timing {
>> +			clock-frequency = <50000>;
> 
> Hmm, 50 KHz for pixel clock? Isn't it a bit too low? Or am I missing 
> something?
> 

Actually clock-frequency value is not used by DRM-FIMD, but instead
required by the framework.

Still it would be better to provide the actual pixel clock value here.
So I would update this with 40MHz which is actual pixel clock used on my
board.

> Best regards,
> Tomasz
> 
>> +			hactive = <1024>;
>> +			vactive = <600>;
>> +			hfront-porch = <64>;
>> +			hback-porch = <16>;
>> +			hsync-len = <48>;
>> +			vback-porch = <64>;
>> +			vfront-porch = <16>;
>> +			vsync-len = <3>;
>> +		};
>> +	};
>>  };

Thanks for your review.

-- 
Tushar Behera