[PATCH] serial: imx: Fix serial clock unbalance

Fabio Estevam festevam at gmail.com
Sun Jun 9 14:17:18 EDT 2013


From: Fabio Estevam <fabio.estevam at freescale.com>

Since commit 0c375501 (serial: imx: enable the clocks for console), the 
imx_startup() function calls clk_prepare_enable conditionally, so we need to 
call clk_disable_unprepare inside imx_shutdown() under the same condition to
avoid unbalanced clock calls.

This avoids the following warning:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 70 at drivers/clk/clk.c:780 __clk_disable+0x68/0x84()
Modules linked in:
CPU: 0 PID: 70 Comm: mountall Not tainted 3.10.0-rc4-next-20130607+ #435
Backtrace: 
[<800116a4>] (dump_backtrace+0x0/0x10c) from [<80011844>] (show_stack+0x18/0x1c)
 r6:8069f4e8 r5:0000030c r4:00000000 r3:00000000
[<8001182c>] (show_stack+0x0/0x1c) from [<8053bce0>] (dump_stack+0x78/0x94)
[<8053bc68>] (dump_stack+0x0/0x94) from [<80023df8>] (warn_slowpath_common+0x6c/0x8c)
 r4:00000000 r3:00000000
[<80023d8c>] (warn_slowpath_common+0x0/0x8c) from [<80023e3c>] (warn_slowpath_null+0x24/0x2c)
 r8:bf2ed008 r7:bfaa9810 r6:000f0013 r5:bf824b80 r4:bf824b80
[<80023e18>] (warn_slowpath_null+0x0/0x2c) from [<8041af84>] (__clk_disable+0x68/0x84)
[<8041af1c>] (__clk_disable+0x0/0x84) from [<8041b098>] (clk_disable+0x20/0x2c)
 r4:600f0013 r3:00000001
[<8041b078>] (clk_disable+0x0/0x2c) from [<802c93e8>] (imx_shutdown+0xbc/0xec)
 r5:bf824b80 r4:bfaa9810
[<802c932c>] (imx_shutdown+0x0/0xec) from [<802c63a0>] (uart_port_shutdown+0x34/0x40)
 r5:bf86f860 r4:bfaa9810
[<802c636c>] (uart_port_shutdown+0x0/0x40) from [<802c68c0>] (uart_shutdown+0x98/0xc4)
 r4:bf86f800 r3:00000000
[<802c6828>] (uart_shutdown+0x0/0xc4) from [<802c7514>] (uart_close+0x5c/0x198)
 r7:bfaa9810 r6:bf274400 r5:bf86f86c r4:bf86f800
[<802c74b8>] (uart_close+0x0/0x198) from [<802ac648>] (tty_release+0xf8/0x500)
[<802ac550>] (tty_release+0x0/0x500) from [<800c5a30>] (__fput+0x9c/0x208)
[<800c5994>] (__fput+0x0/0x208) from [<800c5bac>] (____fput+0x10/0x14)
[<800c5b9c>] (____fput+0x0/0x14) from [<80040234>] (task_work_run+0xb4/0xec)
[<80040180>] (task_work_run+0x0/0xec) from [<80029238>] (do_exit+0x2b0/0x920)
 r8:8000e144 r7:000000f8 r6:bf306300 r5:00000000 r4:bfac1180
[<80028f88>] (do_exit+0x0/0x920) from [<80029a4c>] (do_group_exit+0x50/0xd4)
 r7:000000f8
[<800299fc>] (do_group_exit+0x0/0xd4) from [<80029ae8>] (__wake_up_parent+0x0/0x28)
 r7:000000f8 r6:00000001 r5:0006f7ae r4:0006f79a
[<80029ad0>] (SyS_exit_group+0x0/0x18) from [<8000dfc0>] (ret_fast_syscall+0x0/0x30)
---[ end trace 16d080eb7efea4e9 ]---

Reported-by: Shawn Guo <shawn.guo at linaro.org>
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 drivers/tty/serial/imx.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 78f8097..415cec6 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -901,8 +901,10 @@ static void imx_shutdown(struct uart_port *port)
 	writel(temp, sport->port.membase + UCR1);
 	spin_unlock_irqrestore(&sport->port.lock, flags);
 
-	clk_disable_unprepare(sport->clk_per);
-	clk_disable_unprepare(sport->clk_ipg);
+	if (!uart_console(&sport->port)) {
+		clk_disable_unprepare(sport->clk_per);
+		clk_disable_unprepare(sport->clk_ipg);
+	}
 }
 
 static void
-- 
1.8.1.2




More information about the linux-arm-kernel mailing list