Re[2]: [PATCH V2] serial: imx: enable the clocks only when the uart is used

[Alexander Shiyan]

> On Sat, Jun 08, 2013 at 02:22:39PM +0800, Huang Shijie wrote:
> > 于 2013年06月08日 14:01, Shawn Guo 写道:
> > >Running linux-next 20130607, I just found that the serial console stops
> > >working due to this patch.  I think the clocks need to be enabled for
> > >console as well.
> > could you tell me the board?
> > i tested on imx6q-sabreauto boards, the console is ok.
> 
> imx6q-sabresd

I confirm that console not work correct after this patch on the i.MX27 PCM038 board.

---