[PATCH V2 14/14] ARM: OMAP4: hwmod data: Clean up the data file

[Tony Lindgren]

* Paul Walmsley <paul at pwsan.com> [130607 05:38]:
> On Fri, 7 Jun 2013, Sricharan R wrote:
> 
> > - The IO resource information like dma request lines, irq number and
> >   ocp address space can be populated via dt blob. So such data is stripped
> >   from OMAP4 SOC hwmod data file.
> > 
> > - The devices which are still missing the device tree bindings,
> >   address space entries are not removed yet. When such devices add
> >   the dt bindings, respective address space data can be deleted.
> > 
> > - Also other unnecessary hwmods like firewalls are removed as a part of this.
> >   Since emif was getting registered only because of this firewalls links,
> >   the mpu->emif direct link is added now.
> > 
> > The above update, results in reduction of about ~1650 lines of code.
> > 
> > Signed-off-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
> > Signed-off-by: Sricharan R <r.sricharan at ti.com>
> 
> Acked-by: Paul Walmsley <paul at pwsan.com>
> 
> Can't test this one since I don't have an OMAP4 DT config set up in the testbed
> yet.  Maybe will add that to the testbed after the v3.10 release.

OK thanks, applying into omap-for-v3.11/cleanup.

Regards,

Tony