[PATCH 15/27] ARM: shmobile: r8a7778: use fixed ratio clock
Simon Horman
horms+renesas at verge.net.au
Fri Jun 7 03:51:45 EDT 2013
From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
R-Car M1 has many clocks, and it is possible to
read/use clock ratio of these clocks from FRQMRx.
But, these ratio are fixed value and
these are decided by MD pin status.
This patch reads MD pin status,
and used fixed ratio clock for other clocks.
It was tesed on bock-w board.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/mach-shmobile/clock-r8a7778.c | 149 ++++++++++++++++++++++++++++++---
1 file changed, 136 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index cd68552..5cc271e 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -23,9 +23,23 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+/*
+ * MD MD MD MD PLLA PLLB EXTAL clki clkz
+ * 19 18 12 11 (HMz) (MHz) (MHz)
+ *----------------------------------------------------------------------------
+ * 1 0 0 0 x21 x21 38.00 800 800
+ * 1 0 0 1 x24 x24 33.33 800 800
+ * 1 0 1 0 x28 x28 28.50 800 800
+ * 1 0 1 1 x32 x32 25.00 800 800
+ * 1 1 0 1 x24 x21 33.33 800 700
+ * 1 1 1 0 x28 x21 28.50 800 600
+ * 1 1 1 1 x32 x24 25.00 800 600
+ */
+
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
+#include <mach/clock.h>
#include <mach/common.h>
#define MSTPCR0 IOMEM(0xffc80030)
@@ -37,6 +51,9 @@
#define MSTPCR4 IOMEM(0xffc80050)
#define MSTPCR5 IOMEM(0xffc80054)
#define MSTPCR6 IOMEM(0xffc80058)
+#define MODEMR 0xFFCC0020
+
+#define MD(nr) BIT(nr)
/* ioremap() through clock mapping mandatory to avoid
* collision with ARM coherent DMA virtual memory range.
@@ -47,14 +64,42 @@ static struct clk_mapping cpg_mapping = {
.len = 0x80,
};
-static struct clk clkp = {
- .rate = 62500000, /* FIXME: shortcut */
- .flags = CLK_ENABLE_ON_INIT,
+static struct clk extal_clk = {
+ /* .rate will be updated on r8a7778_clock_init() */
.mapping = &cpg_mapping,
};
+/*
+ * clock ratio of these clock will be updated
+ * on r8a7778_clock_init()
+ */
+SH_FIXED_RATIO_CLK_SET(plla_clk, extal_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(pllb_clk, extal_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(i_clk, plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(s_clk, plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(s1_clk, plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(s3_clk, plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(s4_clk, plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(b_clk, plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(out_clk, plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(p_clk, plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(g_clk, plla_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(z_clk, pllb_clk, 1, 1);
+
static struct clk *main_clks[] = {
- &clkp,
+ &extal_clk,
+ &plla_clk,
+ &pllb_clk,
+ &i_clk,
+ &s_clk,
+ &s1_clk,
+ &s3_clk,
+ &s4_clk,
+ &b_clk,
+ &out_clk,
+ &p_clk,
+ &g_clk,
+ &z_clk,
};
enum {
@@ -64,15 +109,15 @@ enum {
MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
- [MSTP114] = SH_CLK_MSTP32(&clkp, MSTPCR1, 14, 0), /* Ether */
- [MSTP026] = SH_CLK_MSTP32(&clkp, MSTPCR0, 26, 0), /* SCIF0 */
- [MSTP025] = SH_CLK_MSTP32(&clkp, MSTPCR0, 25, 0), /* SCIF1 */
- [MSTP024] = SH_CLK_MSTP32(&clkp, MSTPCR0, 24, 0), /* SCIF2 */
- [MSTP023] = SH_CLK_MSTP32(&clkp, MSTPCR0, 23, 0), /* SCIF3 */
- [MSTP022] = SH_CLK_MSTP32(&clkp, MSTPCR0, 22, 0), /* SCIF4 */
- [MSTP021] = SH_CLK_MSTP32(&clkp, MSTPCR0, 21, 0), /* SCIF5 */
- [MSTP016] = SH_CLK_MSTP32(&clkp, MSTPCR0, 16, 0), /* TMU0 */
- [MSTP015] = SH_CLK_MSTP32(&clkp, MSTPCR0, 15, 0), /* TMU1 */
+ [MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */
+ [MSTP026] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 26, 0), /* SCIF0 */
+ [MSTP025] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 25, 0), /* SCIF1 */
+ [MSTP024] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 24, 0), /* SCIF2 */
+ [MSTP023] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 23, 0), /* SCIF3 */
+ [MSTP022] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 22, 0), /* SCIF4 */
+ [MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */
+ [MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */
+ [MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */
};
static struct clk_lookup lookups[] = {
@@ -90,8 +135,86 @@ static struct clk_lookup lookups[] = {
void __init r8a7778_clock_init(void)
{
+ void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
+ u32 mode;
int k, ret = 0;
+ BUG_ON(!modemr);
+ mode = ioread32(modemr);
+ iounmap(modemr);
+
+ switch (mode & (MD(19) | MD(18) | MD(12) | MD(11))) {
+ case MD(19):
+ extal_clk.rate = 38000000;
+ SH_CLK_SET_RATIO(&plla_clk_ratio, 21, 1);
+ SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1);
+ break;
+ case MD(19) | MD(11):
+ extal_clk.rate = 33333333;
+ SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1);
+ SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1);
+ break;
+ case MD(19) | MD(12):
+ extal_clk.rate = 28500000;
+ SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1);
+ SH_CLK_SET_RATIO(&pllb_clk_ratio, 28, 1);
+ break;
+ case MD(19) | MD(12) | MD(11):
+ extal_clk.rate = 25000000;
+ SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1);
+ SH_CLK_SET_RATIO(&pllb_clk_ratio, 32, 1);
+ break;
+ case MD(19) | MD(18) | MD(11):
+ extal_clk.rate = 33333333;
+ SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1);
+ SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1);
+ break;
+ case MD(19) | MD(18) | MD(12):
+ extal_clk.rate = 28500000;
+ SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1);
+ SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1);
+ break;
+ case MD(19) | MD(18) | MD(12) | MD(11):
+ extal_clk.rate = 25000000;
+ SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1);
+ SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1);
+ break;
+ default:
+ BUG();
+ }
+
+ if (mode & MD(1)) {
+ SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1);
+ SH_CLK_SET_RATIO(&s_clk_ratio, 1, 3);
+ SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 6);
+ SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4);
+ SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8);
+ SH_CLK_SET_RATIO(&p_clk_ratio, 1, 12);
+ SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12);
+ if (mode & MD(2)) {
+ SH_CLK_SET_RATIO(&b_clk_ratio, 1, 18);
+ SH_CLK_SET_RATIO(&out_clk_ratio, 1, 18);
+ } else {
+ SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12);
+ SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12);
+ }
+ } else {
+ SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1);
+ SH_CLK_SET_RATIO(&s_clk_ratio, 1, 4);
+ SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 8);
+ SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4);
+ SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8);
+ SH_CLK_SET_RATIO(&p_clk_ratio, 1, 16);
+ SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12);
+ if (mode & MD(2)) {
+ SH_CLK_SET_RATIO(&b_clk_ratio, 1, 16);
+ SH_CLK_SET_RATIO(&out_clk_ratio, 1, 16);
+ } else {
+ SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12);
+ SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12);
+ }
+ }
+
for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
ret = clk_register(main_clks[k]);
--
1.8.2.1
More information about the linux-arm-kernel
mailing list