[PATCH v4 1/6] drivers: bus: add a new driver for WEIM

Shawn Guo shawn.guo at linaro.org
Thu Jun 6 11:09:37 EDT 2013


On Tue, May 28, 2013 at 02:20:07PM +0800, Huang Shijie wrote:
> The WEIM(Wireless External Interface Module) works like a bus.
> You can attach many different devices on it, such as NOR, onenand.
> 
> In the case of i.MX6q-sabreauto, the NOR is connected to WEIM.
> 
> This patch also adds the devicetree binding document.
> The driver only works when the devicetree is enabled.
> 
> Signed-off-by: Huang Shijie <b32955 at freescale.com>
> ---
>  Documentation/devicetree/bindings/bus/imx-weim.txt |   49 +++++++
>  drivers/bus/Kconfig                                |    9 ++
>  drivers/bus/Makefile                               |    1 +
>  drivers/bus/imx-weim.c                             |  138 ++++++++++++++++++++
>  4 files changed, 197 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/bus/imx-weim.txt
>  create mode 100644 drivers/bus/imx-weim.c

Since no one is collecting drivers/bus/ patches right now, I just
applied the whole series to have the patch go via imx -> arm-soc.
Please let me know if there is any problem.

Shawn




More information about the linux-arm-kernel mailing list