[PATCH 04/13] ARM: dts: list the CPU nodes for Exynos5250

[Chander Kashyap]

Instead of having to specify the number for CPUs in Exynos5250 in platsmp.c
file, let the number of CPUs be determined by having this information listed
in Exynos5250 device tree file.

Signed-off-by: Chander Kashyap <chander.kashyap at linaro.org>
---
 arch/arm/boot/dts/exynos5250.dtsi |   14 ++++++++++++++
 arch/arm/mach-exynos/platsmp.c    |   10 +++++++---
 2 files changed, 21 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index e571d3b..7f6b1c7 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -50,6 +50,20 @@
 		pinctrl3 = &pinctrl_3;
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu at 0 {
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+		cpu at 1 {
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+	};
+
 	pd_gsc: gsc-power-domain at 0x10044000 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044000 0x20>;
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 1a4e4e5..85ea4ca 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -180,10 +180,14 @@ static void __init exynos_smp_init_cpus(void)
 	void __iomem *scu_base = scu_base_addr();
 	unsigned int i, ncores;
 
-	if (soc_is_exynos5250())
-		ncores = 2;
-	else
+	if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
 		ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+	else
+		/*
+		 * CPU Nodes are passed thru DT and set_cpu_possible
+		 * is set by "arm_dt_init_cpu_maps".
+		 */
+		return;
 
 	/* sanity check */
 	if (ncores > nr_cpu_ids) {
-- 
1.7.9.5