[GIT PULL 00/23] Renesas ARM-based SoC updates for v3.11

[Simon Horman]

Apologies,

I thought I had testes this but I have discovered a build problem
relating to the absence of a clean-up patch. I will reshuffle this
pull request and the one for cleanups and repost.

On Thu, Jun 06, 2013 at 04:28:13PM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> The following changes since commit c7788792a5e7b0d5d7f96d0766b4cb6112d47d75:
> 
>   Linux 3.10-rc2 (2013-05-20 14:37:38 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc-for-v3.11
> 
> for you to fetch changes up to 022a815a9119270a485c4b00ea3dce4314605c35:
> 
>   ARM: shmobile: sh73a0: div4 clocks must check the kick bit before changing rate (2013-06-06 14:10:05 +0900)
> 
> ----------------------------------------------------------------
> Renesas ARM-based SoC updates for v3.11
> 
> * Increased clock coverage for r8a7740, r8a73a4, r8a7778 and r8a7790
> * Use fixed clock ratio for r8a7778
> * Always use shmobile_setup_delay for sh73a0
> * Add add CPUFreq support for sh73a0
> * Check kick bit before changing rate on sh73a0
> * Do not overwrite all div4 clock operations on sh73a0
> 
> A very small cleanup patch, "ARM: shmobile: remove ";" from
> SH_FIXED_RATIO_CLK*() macro", is included as it a dependency
> of r8a7790 clock changes.
> 
> ----------------------------------------------------------------
> Bastian Hecht (2):
>       ARM: shmobile: r8a7740: Add interim sh-eth device name to clocks list
>       ARM: shmobile: r8a7740: Add I2C DT clock names
> 
> Guennadi Liakhovetski (4):
>       ARM: shmobile: sh73a0: add support for adjusting CPU frequency
>       ARM: shmobile: sh73a0: add CPUFreq support
>       ARM: shmobile: sh73a0: do not overwrite all div4 clock operations
>       ARM: shmobile: sh73a0: div4 clocks must check the kick bit before changing rate
> 
> Kuninori Morimoto (12):
>       ARM: shmobile: r8a7778: fixup Ether setup code position
>       ARM: shmobile: r8a73a4: add main clock
>       ARM: shmobile: r8a73a4: add pll clocks
>       ARM: shmobile: r8a73a4: add div4 clocks
>       ARM: shmobile: r8a73a4: add div6 clocks
>       ARM: shmobile: r8a7778: use fixed ratio clock
>       ARM: shmobile: r8a7778: add SDHI clock support
>       ARM: shmobile: r8a7778: Register SDHI device
>       ARM: shmobile: remove ";" from SH_FIXED_RATIO_CLK*() macro
>       ARM: shmobile: r8a7790: add main clock
>       ARM: shmobile: r8a7790: add div4 clocks
>       ARM: shmobile: r8a7790: add div6 clocks
> 
> Laurent Pinchart (3):
>       ARM: shmobile: r8a7740: add TPU PWM support
>       ARM: shmobile: r8a7790: Make private clock arrays static
>       ARM: shmobile: r8a7790: add TPU PWM support
> 
> Magnus Damm (1):
>       ARM: shmobile: sh73a0: Always use shmobile_setup_delay()
> 
> Phil Edworthy (1):
>       ARM: shmobile: r8a7779: Add PCIe clocks
> 
>  arch/arm/mach-shmobile/Kconfig                |   2 +
>  arch/arm/mach-shmobile/clock-r8a73a4.c        | 375 ++++++++++++++++++++++++--
>  arch/arm/mach-shmobile/clock-r8a7740.c        |   7 +-
>  arch/arm/mach-shmobile/clock-r8a7778.c        | 156 ++++++++++-
>  arch/arm/mach-shmobile/clock-r8a7779.c        |   4 +-
>  arch/arm/mach-shmobile/clock-r8a7790.c        | 238 +++++++++++++++-
>  arch/arm/mach-shmobile/clock-sh73a0.c         | 111 +++++++-
>  arch/arm/mach-shmobile/include/mach/clock.h   |   4 +-
>  arch/arm/mach-shmobile/include/mach/r8a7778.h |   2 +
>  arch/arm/mach-shmobile/setup-r8a7778.c        |  52 +++-
>  arch/arm/mach-shmobile/setup-sh73a0.c         |  16 +-
>  11 files changed, 906 insertions(+), 61 deletions(-)
> 
> -- 
> 1.8.2.1
>