[PATCH 034/130] ARM: shmobile: mackerel: Register pinctrl mapping for CEU
Simon Horman
horms+renesas at verge.net.au
Wed Jun 5 04:25:25 EDT 2013
From: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Replace the GPIO-based CEU pinmux configuration by a pinctrl mapping.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/mach-shmobile/board-mackerel.c | 24 +++++++++---------------
1 file changed, 9 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index d40d9da..fdd7e3f 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1312,6 +1312,15 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = {
/* ADXL34X */
PIN_MAP_MUX_GROUP_DEFAULT("1-0053", "pfc-sh7372",
"intc_irq21", "intc"),
+ /* CEU */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
+ "ceu_data_0_7", "ceu"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
+ "ceu_clk_0", "ceu"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
+ "ceu_sync", "ceu"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
+ "ceu_field", "ceu"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
"sdhi0_data4", "sdhi0"),
@@ -1497,21 +1506,6 @@ static void __init mackerel_init(void)
gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
- /* CEU */
- gpio_request(GPIO_FN_VIO_CLK, NULL);
- gpio_request(GPIO_FN_VIO_VD, NULL);
- gpio_request(GPIO_FN_VIO_HD, NULL);
- gpio_request(GPIO_FN_VIO_FIELD, NULL);
- gpio_request(GPIO_FN_VIO_CKO, NULL);
- gpio_request(GPIO_FN_VIO_D7, NULL);
- gpio_request(GPIO_FN_VIO_D6, NULL);
- gpio_request(GPIO_FN_VIO_D5, NULL);
- gpio_request(GPIO_FN_VIO_D4, NULL);
- gpio_request(GPIO_FN_VIO_D3, NULL);
- gpio_request(GPIO_FN_VIO_D2, NULL);
- gpio_request(GPIO_FN_VIO_D1, NULL);
- gpio_request(GPIO_FN_VIO_D0, NULL);
-
/* HDMI */
gpio_request(GPIO_FN_HDMI_HPD, NULL);
gpio_request(GPIO_FN_HDMI_CEC, NULL);
--
1.8.2.1
More information about the linux-arm-kernel
mailing list