[PATCH 10/10] ARM: dts: mxs: add pinctrl header files to be able to use symbolic names in dts files

Lothar Waßmann LW at KARO-electronics.de
Wed Jul 31 10:38:00 EDT 2013


Signed-off-by: Lothar Waßmann <LW at KARO-electronics.de>
---
 arch/arm/boot/dts/imx28-apf28.dts      |    2 +-
 arch/arm/boot/dts/imx28-apf28dev.dts   |    2 +-
 arch/arm/boot/dts/imx28-apx4devkit.dts |    2 +-
 arch/arm/boot/dts/imx28-cfa10036.dts   |    2 +-
 arch/arm/boot/dts/imx28-cfa10037.dts   |    2 +-
 arch/arm/boot/dts/imx28-cfa10049.dts   |    2 +-
 arch/arm/boot/dts/imx28-cfa10055.dts   |    2 +-
 arch/arm/boot/dts/imx28-cfa10056.dts   |    2 +-
 arch/arm/boot/dts/imx28-cfa10057.dts   |    2 +-
 arch/arm/boot/dts/imx28-cfa10058.dts   |    2 +-
 arch/arm/boot/dts/imx28-evk.dts        |    2 +-
 arch/arm/boot/dts/imx28-m28evk.dts     |    2 +-
 arch/arm/boot/dts/imx28-sps1.dts       |    2 +-
 arch/arm/boot/dts/imx28-tx28.dts       |   94 +++---
 arch/arm/boot/dts/imx28.dtsi           |  179 ++++++------
 include/dt-bindings/pinctrl/mx23.h     |  333 +++++++++++++++++++++
 include/dt-bindings/pinctrl/mx28.h     |  506 ++++++++++++++++++++++++++++++++
 include/dt-bindings/pinctrl/mxs.h      |   31 ++
 18 files changed, 1020 insertions(+), 149 deletions(-)
 create mode 100644 include/dt-bindings/pinctrl/mx23.h
 create mode 100644 include/dt-bindings/pinctrl/mx28.h
 create mode 100644 include/dt-bindings/pinctrl/mxs.h

diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
index 7eb0758..7198fe3 100644
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ b/arch/arm/boot/dts/imx28-apf28.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Armadeus Systems APF28 module";
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index b602494..a71d38a 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -10,7 +10,7 @@
  */
 
 /* APF28Dev is a docking board for the APF28 SOM */
-/include/ "imx28-apf28.dts"
+#include "imx28-apf28.dts"
 
 / {
 	model = "Armadeus Systems APF28Dev docking/development board";
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 0e7fed4..11befa0 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -1,5 +1,5 @@
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Bluegiga APX4 Development Kit";
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 1ec8c94..db3edb8 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Crystalfontz CFA-10036 Board";
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index 182b99f..2935fa9 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -13,7 +13,7 @@
  * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10037 Board";
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 06e4cfa..4132bdd 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -13,7 +13,7 @@
  * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10049 Board";
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
index 171bcbe..dabc1d5 100644
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -14,7 +14,7 @@
  * The CFA-10055 is an expansion board for the CFA-10036 module and
  * CFA-10037, thus we need to include the CFA-10037 DTS.
  */
-/include/ "imx28-cfa10037.dts"
+#include "imx28-cfa10037.dts"
 
 / {
 	model = "Crystalfontz CFA-10055 Board";
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
index b45dd0e..8938744 100644
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -13,7 +13,7 @@
  * The CFA-10055 is an expansion board for the CFA-10036 module and
  * CFA-10037, thus we need to include the CFA-10037 DTS.
  */
-/include/ "imx28-cfa10037.dts"
+#include "imx28-cfa10037.dts"
 
 / {
 	model = "Crystalfontz CFA-10056 Board";
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 0333c05..d01eac9 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -14,7 +14,7 @@
  * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10057 Board";
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
index 64c64c5..3066188 100644
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -14,7 +14,7 @@
  * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10058 Board";
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 6556197..0b10f61 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Freescale i.MX28 Evaluation Kit";
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 0d322a2..b371b2a 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "DENX M28EVK";
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 6c6a544..1171676 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "SchulerControl GmbH, SC SPS 1";
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 7b2e6ce..49db94e 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -499,9 +499,9 @@
 	edt_ft5x06_pins: edt-ft5x06-pins at 0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x2063 /* MX28_PAD_SSP0_DATA6__GPIO_2_6	RESET */
-			0x2053 /* MX28_PAD_SSP0_DATA5__GPIO_2_5 IRQ */
-			0x4093 /* MX28_PAD_ENET0_RXD2__GPIO_4_9 WAKE */
+			MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
+			MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
+			MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
@@ -511,7 +511,7 @@
 	flexcan_xcvr_pins_a: flexcan-xcvr {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x1003 /* MX28_PAD_LCD_D00__GPIO_1_0 */
+			MX28_PAD_LCD_D00__GPIO_1_0
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
@@ -521,7 +521,7 @@
 	hog_pins_a: hog at 0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 - module LED */
+			MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
@@ -532,29 +532,29 @@
 		reg = <0>;
 		fsl,pinmux-ids = <
 			/* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
-			0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-			0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-			0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-			0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-			0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-			0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-			0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-			0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-			0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-			0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-			0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-			0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-			0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-			0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-			0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-			0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-			0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
-			0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
-			0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
-			0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
-			0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
-			0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
-			0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+			MX28_PAD_LCD_D18__LCD_D18
+			MX28_PAD_LCD_D19__LCD_D19
+			MX28_PAD_LCD_D20__LCD_D20
+			MX28_PAD_LCD_D21__LCD_D21
+			MX28_PAD_LCD_D22__LCD_D22
+			MX28_PAD_LCD_D23__LCD_D23
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
@@ -564,8 +564,8 @@
 	lcdif_ctrl_pins_a: lcdif-ctrl at 0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x11f3	/* MX28_PAD_LCD_ENABLE__GPIO_1_31 - Enable */
-			0x31e3	/* MX28_PAD_LCD_RESET__GPIO_3_30 - Reset */
+			MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
+			MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
@@ -575,15 +575,15 @@
 	mac0_pins_gpio: mac0-gpio-mode at 0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
-			0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
-			0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
-			0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
-			0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
-			0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
-			0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
-			0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
-			0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
+			MX28_PAD_ENET0_MDC__GPIO_4_0
+			MX28_PAD_ENET0_MDIO__GPIO_4_1
+			MX28_PAD_ENET0_RX_EN__GPIO_4_2
+			MX28_PAD_ENET0_RXD0__GPIO_4_3
+			MX28_PAD_ENET0_RXD1__GPIO_4_4
+			MX28_PAD_ENET0_TX_EN__GPIO_4_6
+			MX28_PAD_ENET0_TXD0__GPIO_4_7
+			MX28_PAD_ENET0_TXD1__GPIO_4_8
+			MX28_PAD_ENET_CLK__GPIO_4_16
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
@@ -593,7 +593,7 @@
 	pca9554_pins: pca9554-pins at 0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 IRQ */
+			MX28_PAD_PWM3__GPIO_3_28
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
@@ -603,12 +603,12 @@
 	spi_pins_gpio: spi at 0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x3083	/* MX28_PAD_AUART2_RX__GPIO_3_8 SS0 */
-			0x3093	/* MX28_PAD_AUART2_TX__GPIO_3_9 SS1 */
-			0x2183	/* MX28_PAD_SSP3_SCK__GPIO_2_24 SCK */
-			0x2193	/* MX28_PAD_SSP3_MOSI__GPIO_2_25 MOSI */
-			0x21A3	/* MX28_PAD_SSP3_MISO__GPIO_2_26 MISO */
-			0x21B3	/* MX28_PAD_SSP3_SS0__GPIO_2_27 SS2 */
+			MX28_PAD_AUART2_RX__GPIO_3_8  /* SS0 */
+			MX28_PAD_AUART2_TX__GPIO_3_9  /* SS1 */
+			MX28_PAD_SSP3_SCK__GPIO_2_24  /* SCK */
+			MX28_PAD_SSP3_MOSI__GPIO_2_25 /* MOSI */
+			MX28_PAD_SSP3_MISO__GPIO_2_26 /* MISO */
+			MX28_PAD_SSP3_SS0__GPIO_2_27  /* SS2 */
 		>;
 		fsl,drive-strength = <1>;
 		fsl,voltage = <1>;
@@ -618,7 +618,7 @@
 	tsc2007_pins: tsc2007-pins at 0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x3143 /* MX28_PAD_SAIF0_MCLK__GPIO_3_20 - TSC2007 IRQ */
+			MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
 		>;
 		fsl,drive-strength = <0>;
 		fsl,voltage = <1>;
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index d9bf387..89c5e08 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -9,7 +9,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/mx28.h>
 
 / {
 	interrupt-parent = <&icoll>;
@@ -207,8 +208,8 @@
 				duart_pins_a: duart at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3102 /* MX28_PAD_PWM0__DUART_RX */
-						0x3112 /* MX28_PAD_PWM1__DUART_TX */
+						MX28_PAD_PWM0__DUART_RX
+						MX28_PAD_PWM1__DUART_TX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -218,8 +219,8 @@
 				duart_pins_b: duart at 1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
-						0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -229,10 +230,10 @@
 				duart_4pins_a: duart-4pins at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
-						0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
-						0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
-						0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+						MX28_PAD_AUART0_RX__DUART_CTS
+						MX28_PAD_AUART0_TX__DUART_RTS
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -242,21 +243,21 @@
 				gpmi_pins_a: gpmi-nand at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
-						0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
-						0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
-						0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
-						0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
-						0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
-						0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
-						0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
-						0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
-						0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
-						0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
-						0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
-						0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
-						0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
-						0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+						MX28_PAD_GPMI_D00__GPMI_D0
+						MX28_PAD_GPMI_D01__GPMI_D1
+						MX28_PAD_GPMI_D02__GPMI_D2
+						MX28_PAD_GPMI_D03__GPMI_D3
+						MX28_PAD_GPMI_D04__GPMI_D4
+						MX28_PAD_GPMI_D05__GPMI_D5
+						MX28_PAD_GPMI_D06__GPMI_D6
+						MX28_PAD_GPMI_D07__GPMI_D7
+						MX28_PAD_GPMI_CE0N__GPMI_CE0N
+						MX28_PAD_GPMI_RDY0__GPMI_READY0
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_ALE__GPMI_ALE
+						MX28_PAD_GPMI_CLE__GPMI_CLE
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -593,30 +594,30 @@
 				lcdif_24bit_pins_a: lcdif-24bit at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
-						0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
-						0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
-						0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
-						0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
-						0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
-						0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+						MX28_PAD_LCD_D18__LCD_D18
+						MX28_PAD_LCD_D19__LCD_D19
+						MX28_PAD_LCD_D20__LCD_D20
+						MX28_PAD_LCD_D21__LCD_D21
+						MX28_PAD_LCD_D22__LCD_D22
+						MX28_PAD_LCD_D23__LCD_D23
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -626,22 +627,22 @@
 				lcdif_16bit_pins_a: lcdif-16bit at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -651,10 +652,10 @@
 				lcdif_sync_pins_a: lcdif-sync at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -664,8 +665,8 @@
 				can0_pins_a: can0 at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
-						0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
+						MX28_PAD_GPMI_RDY2__CAN0_TX
+						MX28_PAD_GPMI_RDY3__CAN0_RX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -675,8 +676,8 @@
 				can1_pins_a: can1 at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
-						0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
+						MX28_PAD_GPMI_CE2N__CAN1_TX
+						MX28_PAD_GPMI_CE3N__CAN1_RX
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -686,10 +687,10 @@
 				spi2_pins_a: spi2 at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
-						0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
-						0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
-						0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -699,12 +700,12 @@
 				spi3_pins_a: spi3 at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3082 /* MX28_PAD_AUART2_RX__SSP3_D4 */
-						0x3092 /* MX28_PAD_AUART2_TX__SSP3_D5 */
-						0x2180 /* MX28_PAD_SSP3_SCK__SSP3_SCK */
-						0x2190 /* MX28_PAD_SSP3_MOSI__SSP3_CMD */
-						0x21A0 /* MX28_PAD_SSP3_MISO__SSP3_D0 */
-						0x21B0 /* MX28_PAD_SSP3_SS0__SSP3_D3 */
+						MX28_PAD_AUART2_RX__SSP3_D4
+						MX28_PAD_AUART2_TX__SSP3_D5
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -714,7 +715,7 @@
 				usbphy0_pins_a: usbphy0 at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
+						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
 					>;
 					fsl,drive-strength = <2>;
 					fsl,voltage = <1>;
@@ -724,7 +725,7 @@
 				usbphy0_pins_b: usbphy0 at 1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
+						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
 					>;
 					fsl,drive-strength = <2>;
 					fsl,voltage = <1>;
@@ -734,8 +735,8 @@
 				usbphy0_pins_c: usbphy0 at 2 {
 					reg = <2>;
 					fsl,pinmux-ids = <
-						0x0123 /* MX28_PAD_GPMI_CE2N__GPIO_0_18 - USBOTG_VBUSEN */
-						0x0133 /* MX28_PAD_GPMI_CE3N__GPIO_0_19 - USBOTH_OC */
+						MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
+						MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
 					>;
 					fsl,drive-strength = <2>;
 					fsl,voltage = <1>;
@@ -745,7 +746,7 @@
 				usbphy1_pins_a: usbphy1 at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
+						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
 					>;
 					fsl,drive-strength = <2>;
 					fsl,voltage = <1>;
@@ -755,8 +756,8 @@
 				usbphy1_pins_b: usbphy1 at 1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x31b3 /* MX28_PAD_SPDIF__GPIO_3_27 - USBH_VBUSEN */
-						0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 - USBH_OC */
+						MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
+						MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */
 					>;
 					fsl,drive-strength = <2>;
 					fsl,voltage = <1>;
diff --git a/include/dt-bindings/pinctrl/mx23.h b/include/dt-bindings/pinctrl/mx23.h
new file mode 100644
index 0000000..a31c969
--- /dev/null
+++ b/include/dt-bindings/pinctrl/mx23.h
@@ -0,0 +1,333 @@
+/*
+ * Header providing constants for i.MX23 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW at KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX23_PINCTRL_H__
+#define __DT_BINDINGS_MX23_PINCTRL_H__
+
+#include "mxs.h"
+
+#define MX23_PAD_GPMI_D00__GPMI_D00			0x0000
+#define MX23_PAD_GPMI_D01__GPMI_D01			0x0010
+#define MX23_PAD_GPMI_D02__GPMI_D02			0x0020
+#define MX23_PAD_GPMI_D03__GPMI_D03			0x0030
+#define MX23_PAD_GPMI_D04__GPMI_D04			0x0040
+#define MX23_PAD_GPMI_D05__GPMI_D05			0x0050
+#define MX23_PAD_GPMI_D06__GPMI_D06			0x0060
+#define MX23_PAD_GPMI_D07__GPMI_D07			0x0070
+#define MX23_PAD_GPMI_D08__GPMI_D08			0x0080
+#define MX23_PAD_GPMI_D09__GPMI_D09			0x0090
+#define MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
+#define MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
+#define MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
+#define MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
+#define MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
+#define MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
+#define MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
+#define MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
+#define MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
+#define MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
+#define MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
+#define MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
+#define MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
+#define MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
+#define MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
+#define MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
+#define MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
+#define MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
+#define MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
+#define MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
+#define MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
+#define MX23_PAD_LCD_D00__LCD_D00			0x1000
+#define MX23_PAD_LCD_D01__LCD_D01			0x1010
+#define MX23_PAD_LCD_D02__LCD_D02			0x1020
+#define MX23_PAD_LCD_D03__LCD_D03			0x1030
+#define MX23_PAD_LCD_D04__LCD_D04			0x1040
+#define MX23_PAD_LCD_D05__LCD_D05			0x1050
+#define MX23_PAD_LCD_D06__LCD_D06			0x1060
+#define MX23_PAD_LCD_D07__LCD_D07			0x1070
+#define MX23_PAD_LCD_D08__LCD_D08			0x1080
+#define MX23_PAD_LCD_D09__LCD_D09			0x1090
+#define MX23_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX23_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX23_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX23_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX23_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX23_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX23_PAD_LCD_D16__LCD_D16			0x1100
+#define MX23_PAD_LCD_D17__LCD_D17			0x1110
+#define MX23_PAD_LCD_RESET__LCD_RESET			0x1120
+#define MX23_PAD_LCD_RS__LCD_RS				0x1130
+#define MX23_PAD_LCD_WR__LCD_WR				0x1140
+#define MX23_PAD_LCD_CS__LCD_CS				0x1150
+#define MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
+#define MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
+#define MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
+#define MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
+#define MX23_PAD_PWM0__PWM0				0x11a0
+#define MX23_PAD_PWM1__PWM1				0x11b0
+#define MX23_PAD_PWM2__PWM2				0x11c0
+#define MX23_PAD_PWM3__PWM3				0x11d0
+#define MX23_PAD_PWM4__PWM4				0x11e0
+#define MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
+#define MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
+#define MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
+#define MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
+#define MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
+#define MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
+#define MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
+#define MX23_PAD_ROTARYA__ROTARYA			0x2070
+#define MX23_PAD_ROTARYB__ROTARYB			0x2080
+#define MX23_PAD_EMI_A00__EMI_A00			0x2090
+#define MX23_PAD_EMI_A01__EMI_A01			0x20a0
+#define MX23_PAD_EMI_A02__EMI_A02			0x20b0
+#define MX23_PAD_EMI_A03__EMI_A03			0x20c0
+#define MX23_PAD_EMI_A04__EMI_A04			0x20d0
+#define MX23_PAD_EMI_A05__EMI_A05			0x20e0
+#define MX23_PAD_EMI_A06__EMI_A06			0x20f0
+#define MX23_PAD_EMI_A07__EMI_A07			0x2100
+#define MX23_PAD_EMI_A08__EMI_A08			0x2110
+#define MX23_PAD_EMI_A09__EMI_A09			0x2120
+#define MX23_PAD_EMI_A10__EMI_A10			0x2130
+#define MX23_PAD_EMI_A11__EMI_A11			0x2140
+#define MX23_PAD_EMI_A12__EMI_A12			0x2150
+#define MX23_PAD_EMI_BA0__EMI_BA0			0x2160
+#define MX23_PAD_EMI_BA1__EMI_BA1			0x2170
+#define MX23_PAD_EMI_CASN__EMI_CASN			0x2180
+#define MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
+#define MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
+#define MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
+#define MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
+#define MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
+#define MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
+#define MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
+#define MX23_PAD_EMI_D00__EMI_D00			0x3000
+#define MX23_PAD_EMI_D01__EMI_D01			0x3010
+#define MX23_PAD_EMI_D02__EMI_D02			0x3020
+#define MX23_PAD_EMI_D03__EMI_D03			0x3030
+#define MX23_PAD_EMI_D04__EMI_D04			0x3040
+#define MX23_PAD_EMI_D05__EMI_D05			0x3050
+#define MX23_PAD_EMI_D06__EMI_D06			0x3060
+#define MX23_PAD_EMI_D07__EMI_D07			0x3070
+#define MX23_PAD_EMI_D08__EMI_D08			0x3080
+#define MX23_PAD_EMI_D09__EMI_D09			0x3090
+#define MX23_PAD_EMI_D10__EMI_D10			0x30a0
+#define MX23_PAD_EMI_D11__EMI_D11			0x30b0
+#define MX23_PAD_EMI_D12__EMI_D12			0x30c0
+#define MX23_PAD_EMI_D13__EMI_D13			0x30d0
+#define MX23_PAD_EMI_D14__EMI_D14			0x30e0
+#define MX23_PAD_EMI_D15__EMI_D15			0x30f0
+#define MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
+#define MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
+#define MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
+#define MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
+#define MX23_PAD_EMI_CLK__EMI_CLK			0x3140
+#define MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
+#define MX23_PAD_GPMI_D00__LCD_D8			0x0001
+#define MX23_PAD_GPMI_D01__LCD_D9			0x0011
+#define MX23_PAD_GPMI_D02__LCD_D10			0x0021
+#define MX23_PAD_GPMI_D03__LCD_D11			0x0031
+#define MX23_PAD_GPMI_D04__LCD_D12			0x0041
+#define MX23_PAD_GPMI_D05__LCD_D13			0x0051
+#define MX23_PAD_GPMI_D06__LCD_D14			0x0061
+#define MX23_PAD_GPMI_D07__LCD_D15			0x0071
+#define MX23_PAD_GPMI_D08__LCD_D18			0x0081
+#define MX23_PAD_GPMI_D09__LCD_D19			0x0091
+#define MX23_PAD_GPMI_D10__LCD_D20			0x00a1
+#define MX23_PAD_GPMI_D11__LCD_D21			0x00b1
+#define MX23_PAD_GPMI_D12__LCD_D22			0x00c1
+#define MX23_PAD_GPMI_D13__LCD_D23			0x00d1
+#define MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
+#define MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
+#define MX23_PAD_GPMI_CLE__LCD_D16			0x0101
+#define MX23_PAD_GPMI_ALE__LCD_D17			0x0111
+#define MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
+#define MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
+#define MX23_PAD_AUART1_RX__IR_RX			0x01c1
+#define MX23_PAD_AUART1_TX__IR_TX			0x01d1
+#define MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
+#define MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
+#define MX23_PAD_LCD_D00__ETM_DA8			0x1001
+#define MX23_PAD_LCD_D01__ETM_DA9			0x1011
+#define MX23_PAD_LCD_D02__ETM_DA10			0x1021
+#define MX23_PAD_LCD_D03__ETM_DA11			0x1031
+#define MX23_PAD_LCD_D04__ETM_DA12			0x1041
+#define MX23_PAD_LCD_D05__ETM_DA13			0x1051
+#define MX23_PAD_LCD_D06__ETM_DA14			0x1061
+#define MX23_PAD_LCD_D07__ETM_DA15			0x1071
+#define MX23_PAD_LCD_D08__ETM_DA0			0x1081
+#define MX23_PAD_LCD_D09__ETM_DA1			0x1091
+#define MX23_PAD_LCD_D10__ETM_DA2			0x10a1
+#define MX23_PAD_LCD_D11__ETM_DA3			0x10b1
+#define MX23_PAD_LCD_D12__ETM_DA4			0x10c1
+#define MX23_PAD_LCD_D13__ETM_DA5			0x10d1
+#define MX23_PAD_LCD_D14__ETM_DA6			0x10e1
+#define MX23_PAD_LCD_D15__ETM_DA7			0x10f1
+#define MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
+#define MX23_PAD_LCD_RS__ETM_TCLK			0x1131
+#define MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
+#define MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
+#define MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
+#define MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
+#define MX23_PAD_PWM0__ROTARYA				0x11a1
+#define MX23_PAD_PWM1__ROTARYB				0x11b1
+#define MX23_PAD_PWM2__GPMI_RDY3			0x11c1
+#define MX23_PAD_PWM3__ETM_TCTL				0x11d1
+#define MX23_PAD_PWM4__ETM_TCLK				0x11e1
+#define MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
+#define MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
+#define MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
+#define MX23_PAD_ROTARYA__AUART2_RTS			0x2071
+#define MX23_PAD_ROTARYB__AUART2_CTS			0x2081
+#define MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
+#define MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
+#define MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
+#define MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
+#define MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
+#define MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
+#define MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
+#define MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
+#define MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
+#define MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
+#define MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
+#define MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
+#define MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
+#define MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
+#define MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
+#define MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
+#define MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
+#define MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
+#define MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
+#define MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
+#define MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
+#define MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
+#define MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
+#define MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
+#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
+#define MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
+#define MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
+#define MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
+#define MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
+#define MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
+#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
+#define MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
+#define MX23_PAD_PWM0__DUART_RX				0x11a2
+#define MX23_PAD_PWM1__DUART_TX				0x11b2
+#define MX23_PAD_PWM3__AUART1_CTS			0x11d2
+#define MX23_PAD_PWM4__AUART1_RTS			0x11e2
+#define MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
+#define MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
+#define MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
+#define MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
+#define MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
+#define MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
+#define MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
+#define MX23_PAD_ROTARYA__SPDIF				0x2072
+#define MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
+#define MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
+#define MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
+#define MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
+#define MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
+#define MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
+#define MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
+#define MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
+#define MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
+#define MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
+#define MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
+#define MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
+#define MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
+#define MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
+#define MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
+#define MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
+#define MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
+#define MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
+#define MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
+#define MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
+#define MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
+#define MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
+#define MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
+#define MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
+#define MX23_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX23_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX23_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX23_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX23_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX23_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX23_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX23_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX23_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX23_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX23_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX23_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
+#define MX23_PAD_LCD_RS__GPIO_1_19			0x1133
+#define MX23_PAD_LCD_WR__GPIO_1_20			0x1143
+#define MX23_PAD_LCD_CS__GPIO_1_21			0x1153
+#define MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
+#define MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
+#define MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
+#define MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
+#define MX23_PAD_PWM0__GPIO_1_26			0x11a3
+#define MX23_PAD_PWM1__GPIO_1_27			0x11b3
+#define MX23_PAD_PWM2__GPIO_1_28			0x11c3
+#define MX23_PAD_PWM3__GPIO_1_29			0x11d3
+#define MX23_PAD_PWM4__GPIO_1_30			0x11e3
+#define MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
+#define MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
+#define MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
+#define MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
+#define MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
+#define MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
+#define MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
+#define MX23_PAD_ROTARYA__GPIO_2_7			0x2073
+#define MX23_PAD_ROTARYB__GPIO_2_8			0x2083
+#define MX23_PAD_EMI_A00__GPIO_2_9			0x2093
+#define MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
+#define MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
+#define MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
+#define MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
+#define MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
+#define MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
+#define MX23_PAD_EMI_A07__GPIO_2_16			0x2103
+#define MX23_PAD_EMI_A08__GPIO_2_17			0x2113
+#define MX23_PAD_EMI_A09__GPIO_2_18			0x2123
+#define MX23_PAD_EMI_A10__GPIO_2_19			0x2133
+#define MX23_PAD_EMI_A11__GPIO_2_20			0x2143
+#define MX23_PAD_EMI_A12__GPIO_2_21			0x2153
+#define MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
+#define MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
+#define MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
+#define MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
+#define MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
+#define MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
+#define MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
+#define MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
+#define MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
+#define MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
+
+#endif /* __DT_BINDINGS_MX23_PINCTRL_H__ */
diff --git a/include/dt-bindings/pinctrl/mx28.h b/include/dt-bindings/pinctrl/mx28.h
new file mode 100644
index 0000000..d491f49
--- /dev/null
+++ b/include/dt-bindings/pinctrl/mx28.h
@@ -0,0 +1,506 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW at KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX28_PINCTRL_H__
+#define __DT_BINDINGS_MX28_PINCTRL_H__
+
+#include "mxs.h"
+
+#define MX28_PAD_GPMI_D00__GPMI_D0			0x0000
+#define MX28_PAD_GPMI_D01__GPMI_D1			0x0010
+#define MX28_PAD_GPMI_D02__GPMI_D2			0x0020
+#define MX28_PAD_GPMI_D03__GPMI_D3			0x0030
+#define MX28_PAD_GPMI_D04__GPMI_D4			0x0040
+#define MX28_PAD_GPMI_D05__GPMI_D5			0x0050
+#define MX28_PAD_GPMI_D06__GPMI_D6			0x0060
+#define MX28_PAD_GPMI_D07__GPMI_D7			0x0070
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
+#define MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
+#define MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
+#define MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
+#define MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
+#define MX28_PAD_LCD_D00__LCD_D0			0x1000
+#define MX28_PAD_LCD_D01__LCD_D1			0x1010
+#define MX28_PAD_LCD_D02__LCD_D2			0x1020
+#define MX28_PAD_LCD_D03__LCD_D3			0x1030
+#define MX28_PAD_LCD_D04__LCD_D4			0x1040
+#define MX28_PAD_LCD_D05__LCD_D5			0x1050
+#define MX28_PAD_LCD_D06__LCD_D6			0x1060
+#define MX28_PAD_LCD_D07__LCD_D7			0x1070
+#define MX28_PAD_LCD_D08__LCD_D8			0x1080
+#define MX28_PAD_LCD_D09__LCD_D9			0x1090
+#define MX28_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX28_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX28_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX28_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX28_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX28_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX28_PAD_LCD_D16__LCD_D16			0x1100
+#define MX28_PAD_LCD_D17__LCD_D17			0x1110
+#define MX28_PAD_LCD_D18__LCD_D18			0x1120
+#define MX28_PAD_LCD_D19__LCD_D19			0x1130
+#define MX28_PAD_LCD_D20__LCD_D20			0x1140
+#define MX28_PAD_LCD_D21__LCD_D21			0x1150
+#define MX28_PAD_LCD_D22__LCD_D22			0x1160
+#define MX28_PAD_LCD_D23__LCD_D23			0x1170
+#define MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
+#define MX28_PAD_LCD_RS__LCD_RS				0x11a0
+#define MX28_PAD_LCD_CS__LCD_CS				0x11b0
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
+#define MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
+#define MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
+#define MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
+#define MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
+#define MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
+#define MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
+#define MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
+#define MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
+#define MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
+#define MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
+#define MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
+#define MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
+#define MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
+#define MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
+#define MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
+#define MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
+#define MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
+#define MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
+#define MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
+#define MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
+#define MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
+#define MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
+#define MX28_PAD_AUART0_RX__AUART0_RX			0x3000
+#define MX28_PAD_AUART0_TX__AUART0_TX			0x3010
+#define MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
+#define MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
+#define MX28_PAD_AUART1_RX__AUART1_RX			0x3040
+#define MX28_PAD_AUART1_TX__AUART1_TX			0x3050
+#define MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
+#define MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
+#define MX28_PAD_AUART2_RX__AUART2_RX			0x3080
+#define MX28_PAD_AUART2_TX__AUART2_TX			0x3090
+#define MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
+#define MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
+#define MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
+#define MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
+#define MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
+#define MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
+#define MX28_PAD_PWM0__PWM_0				0x3100
+#define MX28_PAD_PWM1__PWM_1				0x3110
+#define MX28_PAD_PWM2__PWM_2				0x3120
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
+#define MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
+#define MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
+#define MX28_PAD_SPDIF__SPDIF_TX			0x31b0
+#define MX28_PAD_PWM3__PWM_3				0x31c0
+#define MX28_PAD_PWM4__PWM_4				0x31d0
+#define MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
+#define MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
+#define MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
+#define MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
+#define MX28_PAD_EMI_D00__EMI_DATA0			0x5000
+#define MX28_PAD_EMI_D01__EMI_DATA1			0x5010
+#define MX28_PAD_EMI_D02__EMI_DATA2			0x5020
+#define MX28_PAD_EMI_D03__EMI_DATA3			0x5030
+#define MX28_PAD_EMI_D04__EMI_DATA4			0x5040
+#define MX28_PAD_EMI_D05__EMI_DATA5			0x5050
+#define MX28_PAD_EMI_D06__EMI_DATA6			0x5060
+#define MX28_PAD_EMI_D07__EMI_DATA7			0x5070
+#define MX28_PAD_EMI_D08__EMI_DATA8			0x5080
+#define MX28_PAD_EMI_D09__EMI_DATA9			0x5090
+#define MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
+#define MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
+#define MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
+#define MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
+#define MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
+#define MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
+#define MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
+#define MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
+#define MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
+#define MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
+#define MX28_PAD_EMI_CLK__EMI_CLK			0x5150
+#define MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
+#define MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
+#define MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
+#define MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
+#define MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
+#define MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
+#define MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
+#define MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
+#define MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
+#define MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
+#define MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
+#define MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
+#define MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
+#define MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
+#define MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
+#define MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
+#define MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
+#define MX28_PAD_EMI_BA0__EMI_BA0			0x6100
+#define MX28_PAD_EMI_BA1__EMI_BA1			0x6110
+#define MX28_PAD_EMI_BA2__EMI_BA2			0x6120
+#define MX28_PAD_EMI_CASN__EMI_CASN			0x6130
+#define MX28_PAD_EMI_RASN__EMI_RASN			0x6140
+#define MX28_PAD_EMI_WEN__EMI_WEN			0x6150
+#define MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
+#define MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
+#define MX28_PAD_EMI_CKE__EMI_CKE			0x6180
+#define MX28_PAD_GPMI_D00__SSP1_D0			0x0001
+#define MX28_PAD_GPMI_D01__SSP1_D1			0x0011
+#define MX28_PAD_GPMI_D02__SSP1_D2			0x0021
+#define MX28_PAD_GPMI_D03__SSP1_D3			0x0031
+#define MX28_PAD_GPMI_D04__SSP1_D4			0x0041
+#define MX28_PAD_GPMI_D05__SSP1_D5			0x0051
+#define MX28_PAD_GPMI_D06__SSP1_D6			0x0061
+#define MX28_PAD_GPMI_D07__SSP1_D7			0x0071
+#define MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
+#define MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
+#define MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
+#define MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
+#define MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
+#define MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
+#define MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
+#define MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
+#define MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
+#define MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
+#define MX28_PAD_LCD_D03__ETM_DA8			0x1031
+#define MX28_PAD_LCD_D04__ETM_DA9			0x1041
+#define MX28_PAD_LCD_D08__ETM_DA3			0x1081
+#define MX28_PAD_LCD_D09__ETM_DA4			0x1091
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
+#define MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
+#define MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
+#define MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
+#define MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
+#define MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
+#define MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
+#define MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
+#define MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
+#define MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
+#define MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
+#define MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
+#define MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
+#define MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
+#define MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
+#define MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
+#define MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
+#define MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
+#define MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
+#define MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
+#define MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
+#define MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
+#define MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
+#define MX28_PAD_AUART1_RTS__USB0_ID			0x3071
+#define MX28_PAD_AUART2_RX__SSP3_D1			0x3081
+#define MX28_PAD_AUART2_TX__SSP3_D2			0x3091
+#define MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
+#define MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
+#define MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
+#define MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
+#define MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
+#define MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
+#define MX28_PAD_PWM0__I2C1_SCL				0x3101
+#define MX28_PAD_PWM1__I2C1_SDA				0x3111
+#define MX28_PAD_PWM2__USB0_ID				0x3121
+#define MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
+#define MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
+#define MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
+#define MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
+#define MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
+#define MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
+#define MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
+#define MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
+#define MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
+#define MX28_PAD_LCD_D00__ETM_DA0			0x1002
+#define MX28_PAD_LCD_D01__ETM_DA1			0x1012
+#define MX28_PAD_LCD_D02__ETM_DA2			0x1022
+#define MX28_PAD_LCD_D03__ETM_DA3			0x1032
+#define MX28_PAD_LCD_D04__ETM_DA4			0x1042
+#define MX28_PAD_LCD_D05__ETM_DA5			0x1052
+#define MX28_PAD_LCD_D06__ETM_DA6			0x1062
+#define MX28_PAD_LCD_D07__ETM_DA7			0x1072
+#define MX28_PAD_LCD_D08__ETM_DA8			0x1082
+#define MX28_PAD_LCD_D09__ETM_DA9			0x1092
+#define MX28_PAD_LCD_D10__ETM_DA10			0x10a2
+#define MX28_PAD_LCD_D11__ETM_DA11			0x10b2
+#define MX28_PAD_LCD_D12__ETM_DA12			0x10c2
+#define MX28_PAD_LCD_D13__ETM_DA13			0x10d2
+#define MX28_PAD_LCD_D14__ETM_DA14			0x10e2
+#define MX28_PAD_LCD_D15__ETM_DA15			0x10f2
+#define MX28_PAD_LCD_D16__ETM_DA7			0x1102
+#define MX28_PAD_LCD_D17__ETM_DA6			0x1112
+#define MX28_PAD_LCD_D18__ETM_DA5			0x1122
+#define MX28_PAD_LCD_D19__ETM_DA4			0x1132
+#define MX28_PAD_LCD_D20__ETM_DA3			0x1142
+#define MX28_PAD_LCD_D21__ETM_DA2			0x1152
+#define MX28_PAD_LCD_D22__ETM_DA1			0x1162
+#define MX28_PAD_LCD_D23__ETM_DA0			0x1172
+#define MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
+#define MX28_PAD_AUART0_RX__DUART_CTS			0x3002
+#define MX28_PAD_AUART0_TX__DUART_RTS			0x3012
+#define MX28_PAD_AUART0_CTS__DUART_RX			0x3022
+#define MX28_PAD_AUART0_RTS__DUART_TX			0x3032
+#define MX28_PAD_AUART1_RX__PWM_0			0x3042
+#define MX28_PAD_AUART1_TX__PWM_1			0x3052
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
+#define MX28_PAD_AUART2_RX__SSP3_D4			0x3082
+#define MX28_PAD_AUART2_TX__SSP3_D5			0x3092
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
+#define MX28_PAD_PWM0__DUART_RX				0x3102
+#define MX28_PAD_PWM1__DUART_TX				0x3112
+#define MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
+#define MX28_PAD_I2C0_SCL__DUART_RX			0x3182
+#define MX28_PAD_I2C0_SDA__DUART_TX			0x3192
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
+#define MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
+#define MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
+#define MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
+#define MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
+#define MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
+#define MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
+#define MX28_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX28_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX28_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX28_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX28_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX28_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX28_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX28_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX28_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX28_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX28_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX28_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX28_PAD_LCD_D18__GPIO_1_18			0x1123
+#define MX28_PAD_LCD_D19__GPIO_1_19			0x1133
+#define MX28_PAD_LCD_D20__GPIO_1_20			0x1143
+#define MX28_PAD_LCD_D21__GPIO_1_21			0x1153
+#define MX28_PAD_LCD_D22__GPIO_1_22			0x1163
+#define MX28_PAD_LCD_D23__GPIO_1_23			0x1173
+#define MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
+#define MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
+#define MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
+#define MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
+#define MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
+#define MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
+#define MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
+#define MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
+#define MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
+#define MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
+#define MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
+#define MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
+#define MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
+#define MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
+#define MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
+#define MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
+#define MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
+#define MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
+#define MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
+#define MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
+#define MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
+#define MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
+#define MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
+#define MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
+#define MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
+#define MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
+#define MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
+#define MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
+#define MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
+#define MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
+#define MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
+#define MX28_PAD_PWM0__GPIO_3_16			0x3103
+#define MX28_PAD_PWM1__GPIO_3_17			0x3113
+#define MX28_PAD_PWM2__GPIO_3_18			0x3123
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
+#define MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
+#define MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
+#define MX28_PAD_SPDIF__GPIO_3_27			0x31b3
+#define MX28_PAD_PWM3__GPIO_3_28			0x31c3
+#define MX28_PAD_PWM4__GPIO_3_29			0x31d3
+#define MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
+#define MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
+#define MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
+#define MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
+#define MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
+
+#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */
diff --git a/include/dt-bindings/pinctrl/mxs.h b/include/dt-bindings/pinctrl/mxs.h
new file mode 100644
index 0000000..c6da987
--- /dev/null
+++ b/include/dt-bindings/pinctrl/mxs.h
@@ -0,0 +1,31 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW at KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
+#define __DT_BINDINGS_MXS_PINCTRL_H__
+
+/* fsl,drive-strength property */
+#define MXS_DRIVE_4mA		0
+#define MXS_DRIVE_8mA		1
+#define MXS_DRIVE_12mA		2
+#define MXS_DRIVE_16mA		3
+
+/* fsl,voltage property */
+#define MXS_VOLTAGE_LOW		0
+#define MXS_VOLTAGE_HIGH	1
+
+/* fsl,pull-up property */
+#define MXS_PULL_DISABLE	0
+#define MXS_PULL_ENABLE		1
+
+#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
-- 
1.7.2.5




More information about the linux-arm-kernel mailing list