[PATCH 03/07] ARM: shmobile: Use shared SCU SMP boot code on r8a7779

[Magnus Damm]

From: Magnus Damm <damm at opensource.se>

Use shared SCU code on r8a7779 for SMP boot.

Signed-off-by: Magnus Damm <damm at opensource.se>
---

 arch/arm/mach-shmobile/Makefile      |    2 +-
 arch/arm/mach-shmobile/smp-r8a7779.c |   23 ++++++++++++-----------
 2 files changed, 13 insertions(+), 12 deletions(-)

--- 0003/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile	2013-07-31 11:56:16.000000000 +0900
@@ -33,7 +33,7 @@ endif
 # SMP objects
 smp-y				:= platsmp.o headsmp.o
 smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o headsmp-scu.o platsmp-scu.o
-smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o headsmp-scu.o
+smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o headsmp-scu.o platsmp-scu.o
 smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o
 
 # IRQ objects
--- 0001/arch/arm/mach-shmobile/smp-r8a7779.c
+++ work/arch/arm/mach-shmobile/smp-r8a7779.c	2013-07-31 11:55:30.000000000 +0900
@@ -84,33 +84,34 @@ static int r8a7779_platform_cpu_kill(uns
 static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	struct r8a7779_pm_ch *ch = NULL;
-	int ret = -EIO;
+	unsigned int lcpu = cpu_logical_map(cpu);
+	int ret;
 
-	cpu = cpu_logical_map(cpu);
+	ret = shmobile_smp_scu_boot_secondary(cpu, idle);
+	if (ret)
+		return ret;
 
-	if (cpu < ARRAY_SIZE(r8a7779_ch_cpu))
-		ch = r8a7779_ch_cpu[cpu];
+	if (lcpu < ARRAY_SIZE(r8a7779_ch_cpu))
+		ch = r8a7779_ch_cpu[lcpu];
 
 	if (ch)
 		ret = r8a7779_sysc_power_up(ch);
+	else
+		ret = -EIO;
 
 	return ret;
 }
 
 static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 {
-
-	/* setup r8a7779 specific SCU base */
-	shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);
-	scu_enable(shmobile_scu_base);
-
 	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
 	__raw_writel(__pa(shmobile_boot_vector), AVECR);
 	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
 	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
 
-	/* enable cache coherency on booting CPU */
-	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
+	/* setup r8a7779 specific SCU bits */
+	shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);
+	shmobile_smp_scu_prepare_cpus(max_cpus);
 
 	r8a7779_pm_init();