[PATCH 1/2] ARM: mvebu: add support for the AXP WiFi AP board

[Thomas Petazzoni]

The AXP WiFi AP board is a Marvell platform based on the Armada XP
MV78230 SoC. It has two mini-PCIe connectors, one USB 3.0 port powered
by a USB 3.0 controller on PCIe, two Ethernet ports, 1 GB of RAM, 1 GB
of NAND, 16 MB of SPI flash, one SATA port and one button, two UARTs

Successfully tested: USB 3.0 port, the mini-PCIe connectors, SPI
flash, Ethernet ports, SATA port, button, UART.

Untested: NAND flash, due to lack of mainline support for the Armada
370/XP NAND controller for now.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 arch/arm/boot/dts/Makefile                |   1 +
 arch/arm/boot/dts/armada-xp-axpwifiap.dts | 164 ++++++++++++++++++++++++++++++
 2 files changed, 165 insertions(+)
 create mode 100644 arch/arm/boot/dts/armada-xp-axpwifiap.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 641b3c9..66bb64f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-370-mirabox.dtb \
 	armada-370-rd.dtb \
+	armada-xp-axpwifiap.dtb \
 	armada-xp-db.dtb \
 	armada-xp-gp.dtb \
 	armada-xp-openblocks-ax3-4.dtb
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
new file mode 100644
index 0000000..2a542bd
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -0,0 +1,164 @@
+/*
+ * Device Tree file for Marvell RD-AXPWiFiAP.
+ *
+ * Note: this board is shipped with a new generation boot loader that
+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
+ * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
+ * used.
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Marvell RD-AXPWiFiAP";
+	compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <0          0 0xf1000000 0x100000  /* Internal registers 1MiB */
+			  0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>;
+
+		internal-regs {
+			pinctrl {
+				pinctrl-0 = <&pmx_phy_int>;
+				pinctrl-names = "default";
+
+				pmx_ge0: pmx-ge0 {
+					marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+						       "mpp4", "mpp5", "mpp6", "mpp7",
+						       "mpp8", "mpp9", "mpp10", "mpp11";
+					marvell,function = "ge0";
+				};
+
+				pmx_ge1: pmx-ge1 {
+					marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
+						       "mpp16", "mpp17", "mpp18", "mpp19",
+						       "mpp20", "mpp21", "mpp22", "mpp23";
+					marvell,function = "ge1";
+				};
+
+				pmx_keys: pmx-keys {
+					marvell,pins = "mpp33";
+					marvell,function = "gpio";
+				};
+
+				pmx_spi: pmx-spi {
+					marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
+					marvell,function = "spi";
+				};
+
+				pmx_phy_int: pmx-phy-int {
+					marvell,pins = "mpp32";
+					marvell,function = "gpio";
+				};
+			};
+
+			serial at 12000 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+
+			serial at 12100 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+
+			sata at a0000 {
+				nr-ports = <1>;
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy at 0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy at 1 {
+					reg = <1>;
+				};
+			};
+
+			ethernet at 70000 {
+				pinctrl-0 = <&pmx_ge0>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet at 74000 {
+				pinctrl-0 = <&pmx_ge1>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			spi0: spi at 10600 {
+				status = "okay";
+				pinctrl-0 = <&pmx_spi>;
+				pinctrl-names = "default";
+
+				spi-flash at 0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			pcie-controller {
+				status = "okay";
+
+				/* First mini-PCIe port */
+				pcie at 1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+
+				/* Second mini-PCIe port */
+				pcie at 2,0 {
+					/* Port 0, Lane 1 */
+					status = "okay";
+				};
+
+				/* Renesas uPD720202 USB 3.0 controller */
+				pcie at 3,0 {
+					/* Port 0, Lane 3 */
+					status = "okay";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_keys>;
+		pinctrl-names = "default";
+
+		button at 1 {
+			label = "Factory Reset Button";
+			linux,code = <141>; /* KEY_SETUP */
+			gpios = <&gpio1 1 1>;
+		};
+	};
+};
-- 
1.8.1.2