[PATCH 06/10] pinctrl: sunxi: Fix inconsistent indentation

Maxime Ripard maxime.ripard at free-electrons.com
Tue Jul 30 10:59:50 EDT 2013


Some pin functions in the array were not indented like the other
functions in this array. Fix this.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
Cc: Linus Walleij <linus.walleij at linaro.org>
---
 drivers/pinctrl/pinctrl-sunxi-pins.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-sunxi-pins.h b/drivers/pinctrl/pinctrl-sunxi-pins.h
index 3368965..2c7446a 100644
--- a/drivers/pinctrl/pinctrl-sunxi-pins.h
+++ b/drivers/pinctrl/pinctrl-sunxi-pins.h
@@ -806,7 +806,7 @@ static const struct sunxi_desc_pin sun4i_a10_pins[] = {
 		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD13 */
 		  SUNXI_FUNCTION(0x4, "keypad"),	/* IN7 */
 		  SUNXI_FUNCTION(0x5, "sim"),		/* VCCEN */
-		SUNXI_FUNCTION_IRQ(0x6, 17),		/* EINT17 */
+		  SUNXI_FUNCTION_IRQ(0x6, 17),		/* EINT17 */
 		  SUNXI_FUNCTION(0x7, "csi1")),		/* D17 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH18,
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -815,7 +815,7 @@ static const struct sunxi_desc_pin sun4i_a10_pins[] = {
 		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD14 */
 		  SUNXI_FUNCTION(0x4, "keypad"),	/* OUT0 */
 		  SUNXI_FUNCTION(0x5, "sim"),		/* SCK */
-		SUNXI_FUNCTION_IRQ(0x6, 18),		/* EINT18 */
+		  SUNXI_FUNCTION_IRQ(0x6, 18),		/* EINT18 */
 		  SUNXI_FUNCTION(0x7, "csi1")),		/* D18 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH19,
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -824,7 +824,7 @@ static const struct sunxi_desc_pin sun4i_a10_pins[] = {
 		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD15 */
 		  SUNXI_FUNCTION(0x4, "keypad"),	/* OUT1 */
 		  SUNXI_FUNCTION(0x5, "sim"),		/* SDA */
-		SUNXI_FUNCTION_IRQ(0x6, 19),		/* EINT19 */
+		  SUNXI_FUNCTION_IRQ(0x6, 19),		/* EINT19 */
 		  SUNXI_FUNCTION(0x7, "csi1")),		/* D19 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH20,
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -832,7 +832,7 @@ static const struct sunxi_desc_pin sun4i_a10_pins[] = {
 		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D20 */
 		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAOE */
 		  SUNXI_FUNCTION(0x4, "can"),		/* TX */
-		SUNXI_FUNCTION_IRQ(0x6, 20),		/* EINT20 */
+		  SUNXI_FUNCTION_IRQ(0x6, 20),		/* EINT20 */
 		  SUNXI_FUNCTION(0x7, "csi1")),		/* D20 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH21,
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
@@ -840,7 +840,7 @@ static const struct sunxi_desc_pin sun4i_a10_pins[] = {
 		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D21 */
 		  SUNXI_FUNCTION(0x3, "pata"),		/* ATADREQ */
 		  SUNXI_FUNCTION(0x4, "can"),		/* RX */
-		SUNXI_FUNCTION_IRQ(0x6, 21),		/* EINT21 */
+		  SUNXI_FUNCTION_IRQ(0x6, 21),		/* EINT21 */
 		  SUNXI_FUNCTION(0x7, "csi1")),		/* D21 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH22,
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
-- 
1.8.3.4




More information about the linux-arm-kernel mailing list