[PATCH v2 00/42] ARM: at91: move to common clk framework

[boris brezillon]

On 29/07/2013 16:18, Richard Genoud wrote:
> 2013/7/29 boris brezillon <b.brezillon at overkiz.com>:
>> On 29/07/2013 10:00, Richard Genoud wrote:
>>> 2013/7/26 boris brezillon <b.brezillon at overkiz.com>:
>>>> On 26/07/2013 17:44, boris brezillon wrote:
>>>> I found 2 bugs:
>>>> 1) the main frequency ready test in recalc_rate function is wrong
>>>> 2) the common clk framework uses the first match for dt clk registration
>>>>      and main clk has this compatible property:
>>>>      compatible = "atmel,at91rm9200-clk-main", "fixed-clock";
>>>>      As a result the main clk is always bound to the fixed-clock driver
>>>>      which set the clock frequency to 0 if 'clock-frequency' property is
>>>>      missing.
>>>>
>>>> These bugs will be fixed in next version.
>>>> Tell me if you want need thesse patches for testing purpose.
>>> Hi Boris,
>>>
>>> I tested your patch, the clock is not at 0 anymore:
>>> AT91: PIT: mck rate = 8333333
>>>
>>> And it's booting correctly.
>>> There's a small bug I found in the at91sam9x5 dtsi file (ssc id is 28,
>>> not 27). (patch attached)
>>>
>>> And yes, I could use your patches for some more tests !
>>>
>>> Thanks,
>>>
>>> Richard.
>> Hi Richard,
>>
>> Thanks for the bug report.
>>
>> You'll find in attachements the pre-v3 series fixing the detected bugs
>> (including the ssc clock id bug).
>>
>> If you need anything else please let me know.
> Working on sam9g35ek !
> you can add my:
> Tested-by: Richard Genoud <richard.genoud at gmail.com>
>
>
> One remark though:
> Maybe it would be interesting to keep using the defines in the device
> tree for peripheral IDs.
> For instance, in arch/arm/boot/dts/at91sam9x5.dtsi : (patch 33)
> ssc_clk at 28 {
> 	id = <28>;
> };
> May be more readable with the SSC id AT91SAM9X5_ID_SSC, as it was
> defined in arch/arm/mach-at91/at91sam9x5.c (removed with patch 20)
>
> IMHO, all AT91SAM9X5_ID_xxx in
> arch/arm/mach-at91/include/mach/at91sam9x5.h can me moved in
> include/dt-bindings/ and used in at91sam9x5.dtsi
This was requested by Jean-Christophe too.
I'll add these macro files and make use of it in next version.

BTW where should I put these macro files 
(include/dt-bindings/at91/'soc-name'/peripherals.h) ?
Should I use macros for address fied of clocks or just for id property 
(or drop the address) ?

ssc_clk at AT91SAM9X5_ID_SSC {
         id = <AT91SAM9X5_ID_SSC>;
};

or

ssc_clk at 28 {
         id = <AT91SAM9X5_ID_SSC>;
};

or

ssc_clk {
         id = <AT91SAM9X5_ID_SSC>;
};
>
> Best regards,
> Richard.