[PATCH 0/9] ARM: dts: omap5-uevm: fixup wrong regulator configuration
nm at ti.com
Mon Jul 29 10:13:09 EDT 2013
On 07/29/2013 08:39 AM, Benoit Cousson wrote:
> Hi Nishanth,
> On 29/07/2013 15:17, Nishanth Menon wrote:
>> On 07/29/2013 04:57 AM, Keerthy wrote:
>>> Hi Nishanth,
>>> On Wednesday 17 July 2013 10:15 PM, Nishanth Menon wrote:
>>>> Due to wrong older revision of documentation used as reference, we
>>>> seem to have a bunch of LDOs wrongly configured on OMAP5 uEVM. This
>>>> series is based power tree on production board 750-2628-XXX platform.
>>>> Unfortunately, the wrong voltages may be detrimental to OMAP5 as they
>>>> supply hardware blocks at voltages that are out of specification.
>>> This series looks good to me.
>>> Acked-by: J Keerthy <j-keerthy at ti.com>
>> Tony, Benoit - this series could prevent OMAP5 from being damaged on
>> uEVMs with current 3.11 rc - could you suggest what we need to do to
>> get it in?
> I'm still on vacation with no way to pull any patch... but I can still
> comment on the series quickly.
Thanks for responding while on vacation.
> It seems to me that this series contains some real fixes that might
> damage the board due to hihest voltage than expected and some which are
> just improvement like for the SMPS9 or LDO. In theory they should no
> go necesseraly to -rc, but, I guess that's fine for that one.
> All the "fixes" are sharing more than 50% of the changelog content with
> only 2 changes in the code, so you'd better squash them into one patch
> to avoid repeating the same thing again and again.
Reason for keeping them separate was to allow any future git bisect to
narrow down to precise patch.
ARM: dts: omap5-uevm: update SMPS9 settings
ARM: dts: omap5-uevm: update and disable unused regulators LDO
ARM: dts: omap5-uevm: update LDO1 voltage to 1.5V and settings
ARM: dts: omap5-uevm: update LDO3 voltage to 1.5V and settings
ARM: dts: omap5-uevm: update LDO4 voltage to 1.5V and settings
ARM: dts: omap5-uevm: update LDO6 voltage to 1.2V
ARM: dts: omap5-uevm: update LDO7 voltage to 2V and settings
ARM: dts: omap5-uevm: update SDCARD LDO9 and resource REGEN3
Would you have suggestions on what to squash up?
More information about the linux-arm-kernel