[PATCH v6] clk: add MOXA ART SoCs clock driver

[Jonas Jensen]

This patch adds MOXA ART SoCs clock driver support.

Signed-off-by: Jonas Jensen <jonas.jensen at gmail.com>
---

Notes:
    Changes since v5:
    
    1. corrected of_iomap return value check
    2. don't panic, print the error and return
    
    Applies to next-20130729

 .../bindings/clock/moxa,moxart-core-clock.txt      | 23 +++++++
 drivers/clk/Makefile                               |  1 +
 drivers/clk/clk-moxart.c                           | 71 ++++++++++++++++++++++
 3 files changed, 95 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/moxa,moxart-core-clock.txt
 create mode 100644 drivers/clk/clk-moxart.c

diff --git a/Documentation/devicetree/bindings/clock/moxa,moxart-core-clock.txt b/Documentation/devicetree/bindings/clock/moxa,moxart-core-clock.txt
new file mode 100644
index 0000000..379ae79
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/moxa,moxart-core-clock.txt
@@ -0,0 +1,23 @@
+Device Tree Clock bindings for arch-moxart
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+MOXA ART SoCs allow to determine core clock frequencies by reading
+a register.
+
+Required properties:
+- compatible : Must be "moxa,moxart-core-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clock-output-names : Should be "coreclk"
+
+For example:
+
+	coreclk: core-clock at 98100000 {
+		compatible = "moxa,moxart-core-clock";
+		#clock-cells = <0>;
+		reg = <0x98100000 0x34>;
+		clock-output-names = "coreclk";
+	};
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 4038c2b..933622f 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_COMMON_CLK)	+= clk-composite.o
 
 # SoCs specific
 obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o
+obj-$(CONFIG_ARCH_MOXART)	+= clk-moxart.o
 obj-$(CONFIG_ARCH_NOMADIK)	+= clk-nomadik.o
 obj-$(CONFIG_ARCH_HIGHBANK)	+= clk-highbank.o
 obj-$(CONFIG_ARCH_NSPIRE)	+= clk-nspire.o
diff --git a/drivers/clk/clk-moxart.c b/drivers/clk/clk-moxart.c
new file mode 100644
index 0000000..14d5b26
--- /dev/null
+++ b/drivers/clk/clk-moxart.c
@@ -0,0 +1,71 @@
+/*
+ * MOXA ART SoCs clock driver.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen at gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/clkdev.h>
+
+void __init moxart_of_clk_init(struct device_node *node)
+{
+	static void __iomem *base;
+	struct clk *clk;
+	unsigned long rate;
+	unsigned int mul, val, div;
+	const char *name;
+
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("%s: of_iomap failed\n", node->full_name);
+		return;
+	}
+
+	mul = (readl(base + 0x30) >> 3) & 0x1ff;
+	val = (readl(base + 0x0c) >> 4) & 0x7;
+
+	switch (val) {
+	case 1:
+		div = 3;
+		break;
+	case 2:
+		div = 4;
+		break;
+	case 3:
+		div = 6;
+		break;
+	case 4:
+		div = 8;
+		break;
+	default:
+		div = 2;
+		break;
+	}
+
+	/*
+	 * the rate calculation below is only tested and proven
+	 * to be true for UC-7112-LX
+	 *
+	 * UC-7112-LX: mul=80 val=0
+	 *
+	 * to support other moxart SoC hardware, this may need
+	 * a change, though it's possible it works there too
+	 */
+	rate = (mul * 1200000 / div);
+
+	of_property_read_string(node, "clock-output-names", &name);
+	clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+	clk_register_clkdev(clk, NULL, name);
+	of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+	iounmap(base);
+}
+CLK_OF_DECLARE(moxart_core_clock, "moxa,moxart-core-clock", moxart_of_clk_init);
-- 
1.8.2.1