[PATCH v8 06/12] ARM: dts: Add description of System MMU of Exynos SoCs

Sachin Kamat sachin.kamat at linaro.org
Mon Jul 29 04:05:28 EDT 2013


On 29 July 2013 13:27, Cho KyongHo <pullip.cho at samsung.com> wrote:
>> -----Original Message-----
>> From: Cho KyongHo [mailto:pullip.cho at samsung.com]
>> Sent: Monday, July 29, 2013 4:20 PM
>>
>> > -----Original Message-----
>> > From: Sachin Kamat [mailto:sachin.kamat at linaro.org]
>> > Sent: Monday, July 29, 2013 3:38 PM
>> >
>> > Hi KyongHo,
>> >
>> > On 26 July 2013 16:58, Cho KyongHo <pullip.cho at samsung.com> wrote:
>> > > Signed-off-by: Cho KyongHo <pullip.cho at samsung.com>
>> > > ---
>> > >  .../bindings/iommu/samsung,exynos4210-sysmmu.txt   |  103 +++++++
>> > >  arch/arm/boot/dts/exynos4.dtsi                     |  122 ++++++++
>> > >  arch/arm/boot/dts/exynos4210.dtsi                  |   25 ++
>> > >  arch/arm/boot/dts/exynos4x12.dtsi                  |   76 +++++
>> > >  arch/arm/boot/dts/exynos5250.dtsi                  |  291 ++++++++++++++++++++
>> > >  5 files changed, 617 insertions(+), 0 deletions(-)
>> > >  create mode 100644 Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt
>> >
>> > This patch does not apply on the mainline Linus' tree (3.11-rc2). Please rebase.
>> >
>>
>> OK. I will rebase the next patches on that.
>
> I don't get any conflict both on the latest of Linus's tree (3.11-rc3)
> and for-next branch  of Samsung git.
> Can you show me the diff?
>

I get the following error when I do git am on this patch (linus' tree
3.11-rc3). Other patches apply fine.

Applying: ARM: dts: Add description of System MMU of Exynos SoCs
<local_path>/linux/.git/rebase-apply/patch:120: new blank line at EOF.
+
error: patch failed: arch/arm/boot/dts/exynos4.dtsi:161
error: arch/arm/boot/dts/exynos4.dtsi: patch does not apply
error: patch failed: arch/arm/boot/dts/exynos4210.dtsi:119
error: arch/arm/boot/dts/exynos4210.dtsi: patch does not apply
error: patch failed: arch/arm/boot/dts/exynos4x12.dtsi:79
error: arch/arm/boot/dts/exynos4x12.dtsi: patch does not apply
error: patch failed: arch/arm/boot/dts/exynos5250.dtsi:614
error: arch/arm/boot/dts/exynos5250.dtsi: patch does not apply
Patch failed at 0001 ARM: dts: Add description of System MMU of Exynos SoCs
When you have resolved this problem run "git am --resolved".
If you would prefer to skip this patch, instead run "git am --skip".
To restore the original branch and stop patching run "git am --abort".


-- 
With warm regards,
Sachin



More information about the linux-arm-kernel mailing list