[PATCH v2 0/5] ARM: vf610: Add DCU framebuffer driver for Vybrid VF610 platform
Wang Huan-B18965
B18965 at freescale.com
Mon Jul 29 02:13:51 EDT 2013
Hi, Jean-Christophe, Tomi,
Do you have any comments for these patches?
Thanks!
Best Regards,
Alison Wang
> -----Original Message-----
> From: linux-arm-kernel [mailto:linux-arm-kernel-
> bounces at lists.infradead.org] On Behalf Of Wang Huan-B18965
> Sent: Friday, July 19, 2013 11:49 AM
> To: plagnioj at jcrosoft.com; tomi.valkeinen at ti.com; shawn.guo at linaro.org;
> Estevam Fabio-R49496; linux-fbdev at vger.kernel.org; linux-arm-
> kernel at lists.infradead.org
> Cc: Jin Zhengxiong-R64188
> Subject: RE: [PATCH v2 0/5] ARM: vf610: Add DCU framebuffer driver for
> Vybrid VF610 platform
>
> Hi, Jean-Christophe,
>
> Could you please help to review these patches?
>
> Thanks a lot!
>
>
> Best Regards,
> Alison Wang
>
> > -----Original Message-----
> > From: linux-arm-kernel [mailto:linux-arm-kernel-
> > bounces at lists.infradead.org] On Behalf Of Alison Wang
> > Sent: Friday, July 12, 2013 2:08 PM
> > To: plagnioj at jcrosoft.com; tomi.valkeinen at ti.com;
> > shawn.guo at linaro.org; Estevam Fabio-R49496;
> > linux-fbdev at vger.kernel.org; linux-arm- kernel at lists.infradead.org
> > Cc: Jin Zhengxiong-R64188
> > Subject: [PATCH v2 0/5] ARM: vf610: Add DCU framebuffer driver for
> > Vybrid VF610 platform
> >
> > This series contain DCU framebuffer driver for Freescale Vybrid VF610
> > platform.
> >
> > The Display Controller Unit (DCU) module is a system master that
> > fetches graphics stored in internal or external memory and displays
> > them on a TFT LCD panel. A wide range of panel sizes is supported and
> > the timing of the interface signals is highly configurable.
> > Graphics are read directly from memory and then blended in real-time,
> > which allows for dynamic content creation with minimal CPU
> intervention.
> >
> > The features:
> >
> > (1) Full RGB888 output to TFT LCD panel.
> > (2) For the current LCD panel, WQVGA "480x272" is tested.
> > (3) Blending of each pixel using up to 4 source layers dependent on
> > size of panel.
> > (4) Each graphic layer can be placed with one pixel resolution in
> > either axis.
> > (5) Each graphic layer support RGB565 and RGB888 direct colors
> without
> > alpha channel and BGRA8888 direct colors with an alpha channel.
> > (6) Each graphic layer support alpha blending with 8-bit resolution.
> >
> > Changes in v2:
> > - Add a document for DCU framebuffer driver under
> > Documentation/devicetree/bindings/fb/.
> >
> > ----------------------------------------------------------------
> > Alison Wang (5):
> > ARM: dts: vf610: Add DCU and TCON nodes
> > ARM: dts: vf610-twr: Enable DCU and TCON devices
> > ARM: clk: vf610: Add DCU and TCON clock support
> > fb: Add DCU framebuffer driver for Vybrid VF610 platform
> > Documentation: DT: Add DCU framebuffer driver
> >
> > Documentation/devicetree/bindings/fb/fsl-dcu-fb.txt | 36 ++++
> > arch/arm/boot/dts/vf610-twr.dts | 10 +
> > arch/arm/boot/dts/vf610.dtsi | 19 +-
> > arch/arm/mach-imx/clk-vf610.c | 5 +
> > drivers/video/Kconfig | 9 +
> > drivers/video/Makefile | 1 +
> > drivers/video/fsl-dcu-fb.c | 1091
> >
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > +++++++++++++++++++++++++
> > include/dt-bindings/clock/vf610-clock.h | 3 +-
> > 8 files changed, 1172 insertions(+), 2 deletions(-) create mode
> > 100644 Documentation/devicetree/bindings/fb/fsl-dcu-fb.txt
> > create mode 100644 drivers/video/fsl-dcu-fb.c
> >
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list