[PATCH 0/8] ARM: tegra: support LP1 suspend mode

[Dmitry Osipenko]

27.07.2013 23:03, Marc Dietrich пишет:
> On Saturday 27 July 2013 22:26:06 Dmitry Osipenko wrote:
>> 27.07.2013 22:09, Marc Dietrich пишет:
>>> On Saturday 27 July 2013 20:20:38 Dmitry Osipenko wrote:
>>>> 27.07.2013 20:12, Marc Dietrich пишет:
>>>>> On Friday 26 July 2013 17:15:02 Joseph Lo wrote:
>>>>>> This series adds the support of LP1 suspend mode for Tegra.
>>>>>>
>>>>>> Verified on Seaboard, Cardhu and Dalmore.
>>>>>
>>>>> tested on AC100 and worked fine, except
>>>>>
>>>>> [   68.448007] PM: Syncing filesystems ... done.
>>>>> [   71.370086] Freezing user space processes ... (elapsed 0.001 seconds)
>>>>> done. [   71.370088] Freezing remaining freezable tasks ... (elapsed
>>>>> 0.001 seconds) done.
>>>>> [   71.371253] Suspending console(s) (use no_console_suspend to debug)
>>>>> [   71.638481] PM: suspend of devices complete after 266.604 msecs
>>>>> [   71.638905] PM: late suspend of devices complete after 0.417 msecs
>>>>> [   71.639477] PM: noirq suspend of devices complete after 0.568 msecs
>>>>> [   71.639480] Disabling non-boot CPUs ...
>>>>> [   71.640242] CPU1: shutdown
>>>>> [   71.641216] Entering suspend state LP1
>>>>> [   71.641267] Enabling non-boot CPUs ...
>>>>> [   71.643125] CPU1: Booted secondary processor
>>>>> [   71.643449] CPU1 is up
>>>>> [   71.643786] PM: noirq resume of devices complete after 0.331 msecs
>>>>> [   71.644300] PM: early resume of devices complete after 0.364 msecs
>>>>> [   71.648038] ------------[ cut here ]------------
>>>>> [   71.648061] WARNING: CPU: 0 PID: 1025 at kernel/irq/manage.c:529
>>>>> irq_set_irq_wake+0xb8/0xf0()
>>>>> [   71.648064] Unbalanced IRQ 384 wake disable
>>>>> [   71.648068] Modules linked in:
>>>>> [   71.648075] CPU: 0 PID: 1025 Comm: bash Not tainted 3.11.0-rc2-
>>>>> next-20130726-00008-gef01509-dirty #6
> 
>>> Stephen Warren said on IRC that this is known and on the internal bug
>>> tracker already. I just posted it so others are not surprised. Well, I
>>> should have added that it's a know problem. Sorry for that.
>>
>> It might be a known problem only for those who faced with it. Since it's on
>> their internal irc, it wasn't a known issue.
>>
>> It also would be interesting to know if suspend with thumb2 works correctly.
>> On 3.8 I've ported lp0 suspend and it works fine with arm compiled kernel,
>> thumb2 also works but only for about 5-10 hours (resuming on each 5-30
>> minutes, default android behavior) and after I'm getting pmd corruption. I
>> have no idea from where that corruption comes from without ability for hw
>> debugging.
> 
> I don't think anyone can comment on this because lp0 support for mainline is 
> not published yet. On the other hand, if you have patches for which you want 
> some review, feel free to post them here.
> 
> Marc
> 
I'm not expecting comment on it, just for notice :) I'll try this patches in
some near future.