[PATCH v2 00/42] ARM: at91: move to common clk framework
boris brezillon
b.brezillon at overkiz.com
Fri Jul 26 12:35:34 EDT 2013
On 26/07/2013 17:44, boris brezillon wrote:
> On 26/07/2013 16:10, Richard Genoud wrote:
>> On 17/07/2013 15:34, Boris BREZILLON wrote:
>>> Hello,
>>>
>>> This patch series is a proposal to move at91 clock implementation
>>> to common clk framework.
>>>
>>> Most of the clock provided by the PMC (Power Management Controller) are
>>> implemented :
>>> - main clock (main oscillator)
>>> - pll clocks
>>> - master clock
>>> - programmable clocks
>>> - utmi clock
>>> - peripheral clocks
>>> - system clocks
>>>
>>> This implementation is compatible with device tree: the goal is
>>> to define the whole clock tree in the device tree (all currently
>>> available dt SoCs and boards are patched to support dt clocks).
>>> Please feel free to comment the dt bindinds.
>>>
>>> I removed the register_clocks function in SoC supporting dt boards only:
>>> - at91sam9x5 SoCs
>>> - at91sam9n12 SoC
>>> - sama5d3 SoCs
>>>
>>> This patch series is based on linux-next and has been tested on
>>> sama5d31ek
>>> board using device tree. It compiles for other SoCs and both with and
>>> without
>>> dt support, but it has not been tested.
>>>
>>> BTW could other people test it on other boards (I only have a kizbox and
>>> a sama5d31ek dev kit).
>>>
>>> Best Regards,
>>> Boris
>>>
>>> Changes since v1:
>>> - fix bugs in pll, programmable and system clock implementations
>>> (wrong bit position).
>>> - add usb clock configuration support (ohci and udc drivers +
>>> clk_lookup for non dt boards)
>>> - rework of the system clock interfaces (no need to define a parent
>>> clock,
>>> system clock is a gate with no rate info)
>>> - change system, peripheral and programmable clk dt bindings (1
>>> master node
>>> and multiple child nodes each defining a system/peripheral or
>>> prog clock)
>>> - fix bugs in sama5 dt definition
>>>
>> Hi Boris,
>>
>> First of all: Big thumbs up for this work !
>>
>> Then, I tested the serie on at91sam9g35ek (sam9x5 familly), and I see
>> some problems:
>> kernel is next-20130725 with the v4 serie of "ARM: at91: prepare
>> transition to common clk framework"
>> and v2 serie of "ARM: at91: move to common clk framework"
>>
>> [ 0.000000] Booting Linux on physical CPU 0x0
>> [ 0.000000] Linux version 3.11.0-rc2-next-20130725+
>> (rgenoud at lnx-rg) (gcc version 4.7.3 (Buildroot
>> 2013.05-00157-g6d1e60b-dirty) ) #61 Fri Jul 26 15:30:13 CEST 2013
>> [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ),
>> cr=00053177
>> [ 0.000000] CPU: VIVT data cache, VIVT instruction cache
>> [ 0.000000] Machine: Atmel AT91SAM (Device Tree), model: Atmel
>> AT91SAM9G35-EK
>> [ 0.000000] bootconsole [earlycon0] enabled
>> [ 0.000000] Memory policy: ECC disabled, Data cache writeback
>> [ 0.000000] AT91: Detected soc type: at91sam9x5
>> [ 0.000000] AT91: Detected soc subtype: at91sam9g35
>> [ 0.000000] AT91: sram at 0x300000 of 0x8000 mapped at 0xfef70000
>> [ 0.000000] On node 0 totalpages: 32768
>> [ 0.000000] free_area_init_node: node 0, pgdat c039d208,
>> node_mem_map c03b5000
>> [ 0.000000] Normal zone: 256 pages used for memmap
>> [ 0.000000] Normal zone: 0 pages reserved
>> [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
>> [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
>> [ 0.000000] pcpu-alloc: [0] 0
>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
>> Total pages: 32512
>> [ 0.000000] Kernel command line: console=ttyS0,115200 loglevel=8
>> ip=dhcp root=/dev/nfs nfsroot=10.128.0.9:/nfsroot,v3 rw earlyprintk
>> [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
>> [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536
>> bytes)
>> [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768
>> bytes)
>> [ 0.000000] Memory: 126044K/131072K available (2804K kernel code,
>> 126K rwdata, 592K rodata, 141K init, 93K bss, 5028K reserved)
>> [ 0.000000] Virtual kernel memory layout:
>> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
>> [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
>> [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
>> [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
>> [ 0.000000] .text : 0xc0008000 - 0xc0359550 (3398 kB)
>> [ 0.000000] .init : 0xc035a000 - 0xc037d61c ( 142 kB)
>> [ 0.000000] .data : 0xc037e000 - 0xc039d920 ( 127 kB)
>> [ 0.000000] .bss : 0xc039d920 - 0xc03b4ff4 ( 94 kB)
>> [ 0.000000] NR_IRQS:16 nr_irqs:16 16
>> [ 0.000000] AT91: PIT: mck rate = 0
>> [ 0.000000] ------------[ cut here ]------------
>> [ 0.000000] WARNING: CPU: 0 PID: 0 at
>> arch/arm/mach-at91/at91sam926x_time.c:259
>> at91sam926x_pit_init+0x114/0x234()
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted
>> 3.11.0-rc2-next-20130725+ #61
>> [ 0.000000] [<c000ca18>] (unwind_backtrace+0x0/0xe0) from
>> [<c000b0f0>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c000b0f0>] (show_stack+0x10/0x14) from [<c00144e0>]
>> (warn_slowpath_common+0x5c/0x7c)
>> [ 0.000000] [<c00144e0>] (warn_slowpath_common+0x5c/0x7c) from
>> [<c00145b8>] (warn_slowpath_null+0x18/0x1c)
>> [ 0.000000] [<c00145b8>] (warn_slowpath_null+0x18/0x1c) from
>> [<c03607b0>] (at91sam926x_pit_init+0x114/0x234)
>> [ 0.000000] [<c03607b0>] (at91sam926x_pit_init+0x114/0x234) from
>> [<c035ca4c>] (time_init+0x1c/0x24)
>> [ 0.000000] [<c035ca4c>] (time_init+0x1c/0x24) from [<c035a650>]
>> (start_kernel+0x19c/0x2f4)
>> [ 0.000000] [<c035a650>] (start_kernel+0x19c/0x2f4) from
>> [<20008040>] (0x20008040)
>> [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]---
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W
>> 3.11.0-rc2-next-20130725+ #61
>> [ 0.000000] [<c000ca18>] (unwind_backtrace+0x0/0xe0) from
>> [<c000b0f0>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c000b0f0>] (show_stack+0x10/0x14) from [<c013f0a0>]
>> (Ldiv0_64+0x8/0x18)
>> [ 0.000000] [<c013f0a0>] (Ldiv0_64+0x8/0x18) from [<c003b864>]
>> (__clocksource_updatefreq_scale+0x30/0x104)
>> [ 0.000000] [<c003b864>]
>> (__clocksource_updatefreq_scale+0x30/0x104) from [<c003b944>]
>> (__clocksource_register_scale+0xc/0x48)
>> [ 0.000000] [<c003b944>] (__clocksource_register_scale+0xc/0x48)
>> from [<c0360810>] (at91sam926x_pit_init+0x174/0x234)
>> [ 0.000000] [<c0360810>] (at91sam926x_pit_init+0x174/0x234) from
>> [<c035ca4c>] (time_init+0x1c/0x24)
>> [ 0.000000] [<c035ca4c>] (time_init+0x1c/0x24) from [<c035a650>]
>> (start_kernel+0x19c/0x2f4)
>> [ 0.000000] [<c035a650>] (start_kernel+0x19c/0x2f4) from
>> [<20008040>] (0x20008040)
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W
>> 3.11.0-rc2-next-20130725+ #61
>> [ 0.000000] [<c000ca18>] (unwind_backtrace+0x0/0xe0) from
>> [<c000b0f0>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c000b0f0>] (show_stack+0x10/0x14) from [<c013f0a0>]
>> (Ldiv0_64+0x8/0x18)
>> [ 0.000000] [<c013f0a0>] (Ldiv0_64+0x8/0x18) from [<c003b76c>]
>> (clocks_calc_mult_shift+0x70/0xa4)
>> [ 0.000000] [<c003b76c>] (clocks_calc_mult_shift+0x70/0xa4) from
>> [<c003b8e4>] (__clocksource_updatefreq_scale+0xb0/0x104)
>> [ 0.000000] [<c003b8e4>]
>> (__clocksource_updatefreq_scale+0xb0/0x104) from [<c003b944>]
>> (__clocksource_register_scale+0xc/0x48)
>> [ 0.000000] [<c003b944>] (__clocksource_register_scale+0xc/0x48)
>> from [<c0360810>] (at91sam926x_pit_init+0x174/0x234)
>> [ 0.000000] [<c0360810>] (at91sam926x_pit_init+0x174/0x234) from
>> [<c035ca4c>] (time_init+0x1c/0x24)
>> [ 0.000000] [<c035ca4c>] (time_init+0x1c/0x24) from [<c035a650>]
>> (start_kernel+0x19c/0x2f4)
>> [ 0.000000] [<c035a650>] (start_kernel+0x19c/0x2f4) from
>> [<20008040>] (0x20008040)
>> [...]
>>
>> Best regards,
>> Richard
> Hi Richard,
>
> First, I'd like to thank you for your tests.
>
> Regarding your problem, it seems that mck rate is calculated as 0, which
> is either a bug in recalc_rate callback
> of master clock driver or a bug in master clock parent clk (no parent
> found or bug in the current parent clk recalc_rate function).
>
> I checked the dts[i] files and I found a missing clock-frequency
> property for main clock of some
> at91sam9x5 boards (those including at91sam9x5cm.dtsi).
>
> You'll find a patch adding this property in attachments.
> Tell me if this works for you. If not I'll make a patch adding pr_info
> to trace the bug.
>
> Anyway, it should work without this property (main clock rate can be
> computed using slow clock rate and MCFR register).
> I will investigate this bug...
I found 2 bugs:
1) the main frequency ready test in recalc_rate function is wrong
2) the common clk framework uses the first match for dt clk registration
and main clk has this compatible property:
compatible = "atmel,at91rm9200-clk-main", "fixed-clock";
As a result the main clk is always bound to the fixed-clock driver
which set the clock frequency to 0 if 'clock-frequency' property is
missing.
These bugs will be fixed in next version.
Tell me if you want need thesse patches for testing purpose.
>
> Best Regards,
> Boris
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
More information about the linux-arm-kernel
mailing list