[PATCH v10 3/8] usb: phy: twl4030: use the new generic PHY framework
Kishon Vijay Abraham I
kishon at ti.com
Fri Jul 26 08:42:57 EDT 2013
Used the generic PHY framework API to create the PHY. For powering on
and powering off the PHY, power_on and power_off ops are used. Once the
MUSB OMAP glue is adapted to the new framework, the suspend and resume
ops of usb phy library will be removed. Also twl4030-usb driver is moved
to drivers/phy/.
However using the old usb phy library cannot be completely removed
because otg is intertwined with phy and moving to the new
framework completely will break otg. Once we have a separate otg state machine,
we can get rid of the usb phy library.
Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
Acked-by: Felipe Balbi <balbi at ti.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
---
drivers/phy/Kconfig | 11 ++++++
drivers/phy/Makefile | 1 +
drivers/{usb => }/phy/phy-twl4030-usb.c | 56 +++++++++++++++++++++++++++++--
drivers/usb/phy/Kconfig | 9 -----
drivers/usb/phy/Makefile | 1 -
include/linux/i2c/twl.h | 2 ++
6 files changed, 67 insertions(+), 13 deletions(-)
rename drivers/{usb => }/phy/phy-twl4030-usb.c (95%)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 38c3477..ac239ac 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -27,4 +27,15 @@ config OMAP_USB2
The USB OTG controller communicates with the comparator using this
driver.
+config TWL4030_USB
+ tristate "TWL4030 USB Transceiver Driver"
+ depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this to support the USB OTG transceiver on TWL4030
+ family chips (including the TWL5030 and TPS659x0 devices).
+ This transceiver supports high and full speed devices plus,
+ in host mode, low speed.
+
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index ed5b088..0dd8a98 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
+obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
diff --git a/drivers/usb/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
similarity index 95%
rename from drivers/usb/phy/phy-twl4030-usb.c
rename to drivers/phy/phy-twl4030-usb.c
index 8f78d2d..494f107 100644
--- a/drivers/usb/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -33,6 +33,7 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/usb/otg.h>
+#include <linux/phy/phy.h>
#include <linux/usb/musb-omap.h>
#include <linux/usb/ulpi.h>
#include <linux/i2c/twl.h>
@@ -431,6 +432,14 @@ static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off)
dev_dbg(twl->dev, "%s\n", __func__);
}
+static int twl4030_phy_power_off(struct phy *phy)
+{
+ struct twl4030_usb *twl = phy_get_drvdata(phy);
+
+ twl4030_phy_suspend(twl, 0);
+ return 0;
+}
+
static void __twl4030_phy_resume(struct twl4030_usb *twl)
{
twl4030_phy_power(twl, 1);
@@ -459,6 +468,14 @@ static void twl4030_phy_resume(struct twl4030_usb *twl)
}
}
+static int twl4030_phy_power_on(struct phy *phy)
+{
+ struct twl4030_usb *twl = phy_get_drvdata(phy);
+
+ twl4030_phy_resume(twl);
+ return 0;
+}
+
static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
{
/* Enable writing to power configuration registers */
@@ -602,13 +619,22 @@ static int twl4030_usb_phy_init(struct usb_phy *phy)
status = twl4030_usb_linkstat(twl);
twl->linkstat = status;
- if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID)
+ if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID) {
omap_musb_mailbox(twl->linkstat);
+ twl4030_phy_resume(twl);
+ }
sysfs_notify(&twl->dev->kobj, NULL, "vbus");
return 0;
}
+static int twl4030_phy_init(struct phy *phy)
+{
+ struct twl4030_usb *twl = phy_get_drvdata(phy);
+
+ return twl4030_usb_phy_init(&twl->phy);
+}
+
static int twl4030_set_suspend(struct usb_phy *x, int suspend)
{
struct twl4030_usb *twl = phy_to_twl(x);
@@ -646,13 +672,23 @@ static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host)
return 0;
}
+static const struct phy_ops ops = {
+ .init = twl4030_phy_init,
+ .power_on = twl4030_phy_power_on,
+ .power_off = twl4030_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
static int twl4030_usb_probe(struct platform_device *pdev)
{
struct twl4030_usb_data *pdata = pdev->dev.platform_data;
struct twl4030_usb *twl;
+ struct phy *phy;
int status, err;
struct usb_otg *otg;
struct device_node *np = pdev->dev.of_node;
+ struct phy_provider *phy_provider;
+ struct phy_init_data *init_data = NULL;
twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL);
if (!twl)
@@ -661,9 +697,10 @@ static int twl4030_usb_probe(struct platform_device *pdev)
if (np)
of_property_read_u32(np, "usb_mode",
(enum twl4030_usb_mode *)&twl->usb_mode);
- else if (pdata)
+ else if (pdata) {
twl->usb_mode = pdata->usb_mode;
- else {
+ init_data = pdata->init_data;
+ } else {
dev_err(&pdev->dev, "twl4030 initialized without pdata\n");
return -EINVAL;
}
@@ -689,6 +726,19 @@ static int twl4030_usb_probe(struct platform_device *pdev)
otg->set_host = twl4030_set_host;
otg->set_peripheral = twl4030_set_peripheral;
+ phy_provider = devm_of_phy_provider_register(twl->dev,
+ of_phy_simple_xlate);
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ phy = devm_phy_create(twl->dev, &ops, init_data);
+ if (IS_ERR(phy)) {
+ dev_dbg(&pdev->dev, "Failed to create PHY\n");
+ return PTR_ERR(phy);
+ }
+
+ phy_set_drvdata(phy, twl);
+
/* init spinlock for workqueue */
spin_lock_init(&twl->lock);
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 7813238..1e05b1d 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -102,15 +102,6 @@ config SAMSUNG_USB3PHY
Enable this to support Samsung USB 3.0 (Super Speed) phy controller
for samsung SoCs.
-config TWL4030_USB
- tristate "TWL4030 USB Transceiver Driver"
- depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
- help
- Enable this to support the USB OTG transceiver on TWL4030
- family chips (including the TWL5030 and TPS659x0 devices).
- This transceiver supports high and full speed devices plus,
- in host mode, low speed.
-
config TWL6030_USB
tristate "TWL6030 USB Transceiver Driver"
depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 56d2b03..7bcc9ed0 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -20,7 +20,6 @@ obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o
obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o
obj-$(CONFIG_SAMSUNG_USB2PHY) += phy-samsung-usb2.o
obj-$(CONFIG_SAMSUNG_USB3PHY) += phy-samsung-usb3.o
-obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o
obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o
obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 81cbbdb..673a3ce 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -26,6 +26,7 @@
#define __TWL_H_
#include <linux/types.h>
+#include <linux/phy/phy.h>
#include <linux/input/matrix_keypad.h>
/*
@@ -615,6 +616,7 @@ enum twl4030_usb_mode {
struct twl4030_usb_data {
enum twl4030_usb_mode usb_mode;
unsigned long features;
+ struct phy_init_data *init_data;
int (*phy_init)(struct device *dev);
int (*phy_exit)(struct device *dev);
--
1.7.10.4
More information about the linux-arm-kernel
mailing list