[PATCH v6 03/11] irqchip: mmp: support MULTI_IRQ_HANDLER
Haojian Zhuang
haojian.zhuang at gmail.com
Fri Jul 26 06:05:25 EDT 2013
Support CONFIG_MULTI_IRQ_HANDLER in ARCH_MMP. So remove entry-macro.S.
Signed-off-by: Haojian Zhuang <haojian.zhuang at gmail.com>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-mmp/include/mach/entry-macro.S | 26 -----------------
drivers/irqchip/irq-mmp.c | 42 +++++++++++++++++++++++++++-
3 files changed, 42 insertions(+), 27 deletions(-)
delete mode 100644 arch/arm/mach-mmp/include/mach/entry-macro.S
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ba412e0..76793a6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -557,6 +557,7 @@ config ARCH_MMP
select GENERIC_CLOCKEVENTS
select GPIO_PXA
select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
select NEED_MACH_GPIO_H
select PINCTRL
select PLAT_PXA
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
deleted file mode 100644
index bd152e2..0000000
--- a/arch/arm/mach-mmp/include/mach/entry-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/entry-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/irq.h>
-#include <mach/regs-icu.h>
-
- .macro get_irqnr_preamble, base, tmp
- mrc p15, 0, \tmp, c0, c0, 0 @ CPUID
- and \tmp, \tmp, #0xff00
- cmp \tmp, #0x5800
- ldr \base, =mmp_icu_base
- ldr \base, [\base, #0]
- addne \base, \base, #0x10c @ PJ1 AP INT SEL register
- addeq \base, \base, #0x104 @ PJ4 IRQ SEL register
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \tmp, [\base, #0]
- and \irqnr, \tmp, #0x3f
- tst \tmp, #(1 << 6)
- .endm
diff --git a/drivers/irqchip/irq-mmp.c b/drivers/irqchip/irq-mmp.c
index 275709b..84d51ff 100644
--- a/drivers/irqchip/irq-mmp.c
+++ b/drivers/irqchip/irq-mmp.c
@@ -21,6 +21,9 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <asm/exception.h>
+#include <asm/mach/irq.h>
+
#include <mach/irqs.h>
#ifdef CONFIG_CPU_MMP2
@@ -34,6 +37,13 @@
#define MAX_ICU_NR 16
+#define PJ1_INT_SEL 0x10c
+#define PJ4_INT_SEL 0x104
+
+/* bit fields in PJ1_INT_SEL and PJ4_INT_SEL */
+#define SEL_INT_PENDING (1 << 6)
+#define SEL_INT_NUM_MASK 0x3f
+
struct icu_chip_data {
int nr_irqs;
unsigned int virq_base;
@@ -54,7 +64,7 @@ struct mmp_intc_conf {
unsigned int conf_mask;
};
-void __iomem *mmp_icu_base;
+static void __iomem *mmp_icu_base;
static struct icu_chip_data icu_data[MAX_ICU_NR];
static int max_icu_nr;
@@ -193,6 +203,32 @@ static struct mmp_intc_conf mmp2_conf = {
.conf_mask = 0x7f,
};
+static asmlinkage void __exception_irq_entry
+mmp_handle_irq(struct pt_regs *regs)
+{
+ int irq, hwirq;
+
+ hwirq = readl_relaxed(mmp_icu_base + PJ1_INT_SEL);
+ if (!(hwirq & SEL_INT_PENDING))
+ return;
+ hwirq &= SEL_INT_NUM_MASK;
+ irq = irq_find_mapping(icu_data[0].domain, hwirq);
+ handle_IRQ(irq, regs);
+}
+
+static asmlinkage void __exception_irq_entry
+mmp2_handle_irq(struct pt_regs *regs)
+{
+ int irq, hwirq;
+
+ hwirq = readl_relaxed(mmp_icu_base + PJ4_INT_SEL);
+ if (!(hwirq & SEL_INT_PENDING))
+ return;
+ hwirq &= SEL_INT_NUM_MASK;
+ irq = irq_find_mapping(icu_data[0].domain, hwirq);
+ handle_IRQ(irq, regs);
+}
+
/* MMP (ARMv5) */
void __init icu_init_irq(void)
{
@@ -214,6 +250,7 @@ void __init icu_init_irq(void)
set_irq_flags(irq, IRQF_VALID);
}
irq_set_default_host(icu_data[0].domain);
+ set_handle_irq(mmp_handle_irq);
#ifdef CONFIG_CPU_PXA910
icu_irq_chip.irq_set_wake = pxa910_set_wake;
#endif
@@ -320,6 +357,7 @@ void __init mmp2_init_icu(void)
set_irq_flags(irq, IRQF_VALID);
}
irq_set_default_host(icu_data[0].domain);
+ set_handle_irq(mmp2_handle_irq);
#ifdef CONFIG_CPU_MMP2
icu_irq_chip.irq_set_wake = mmp2_set_wake;
#endif
@@ -380,6 +418,7 @@ static int __init mmp_of_init(struct device_node *node,
icu_data[0].conf_disable = mmp_conf.conf_disable;
icu_data[0].conf_mask = mmp_conf.conf_mask;
irq_set_default_host(icu_data[0].domain);
+ set_handle_irq(mmp_handle_irq);
max_icu_nr = 1;
return 0;
}
@@ -398,6 +437,7 @@ static int __init mmp2_of_init(struct device_node *node,
icu_data[0].conf_disable = mmp2_conf.conf_disable;
icu_data[0].conf_mask = mmp2_conf.conf_mask;
irq_set_default_host(icu_data[0].domain);
+ set_handle_irq(mmp2_handle_irq);
max_icu_nr = 1;
return 0;
}
--
1.8.1.2
More information about the linux-arm-kernel
mailing list