[PATCH 2/2] ARM: mx53: Allow suspend/resume
Fabio Estevam
festevam at gmail.com
Thu Jul 25 23:17:36 EDT 2013
From: Fabio Estevam <fabio.estevam at freescale.com>
Current imx53_pm_init() implementation is incomplete as it lacks calling
suspend_set_ops().
Use a single imx5_pm_init() function to handle both mx51 and mx53.
This allows mx53 to enter in low-power mode.
Tested on a mx53qsb:
root at freescale /$ echo mem > /sys/power/state
PM: Syncing filesystems ... done.
mmc0: card e624 removed
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
... (Press Power button)
PM: suspend of devices complete after 17.067 msecs
PM: suspend devices took 0.020 seconds
PM: late suspend of devices complete after 0.954 msecs
PM: noirq suspend of devices complete after 1.288 msecs
Disabling non-boot CPUs ...
PM: noirq resume of devices complete after 0.680 msecs
PM: early resume of devices complete after 0.914 msecs
PM: resume of devices complete after 44.955 msecs
PM: resume devices took 0.050 seconds
Restarting tasks ... done.
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new SDHC card at address e624
mmcblk0: mmc0:e624 SU04G 3.69 GiB
mmcblk0: p1 p2 p3
libphy: 63fec000.etherne:00 - Link is Down
libphy: 63fec000.etherne:00 - Link is Up - 100/Full
root at freescale /$
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
arch/arm/mach-imx/common.h | 6 ++----
arch/arm/mach-imx/mm-imx5.c | 4 ++--
arch/arm/mach-imx/pm-imx5.c | 7 +------
3 files changed, 5 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index b96aff7..cdc9288 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -147,12 +147,10 @@ extern int imx_cpu_kill(unsigned int cpu);
#ifdef CONFIG_PM
extern void imx6q_pm_init(void);
-extern void imx51_pm_init(void);
-extern void imx53_pm_init(void);
+extern void imx5_pm_init(void);
#else
static inline void imx6q_pm_init(void) {}
-static inline void imx51_pm_init(void) {}
-static inline void imx53_pm_init(void) {}
+static inline void imx5_pm_init(void) {}
#endif
#ifdef CONFIG_NEON
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index cf193d8..a8229b7 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -153,10 +153,10 @@ void __init imx51_soc_init(void)
void __init imx51_init_late(void)
{
mx51_neon_fixup();
- imx51_pm_init();
+ imx5_pm_init();
}
void __init imx53_init_late(void)
{
- imx53_pm_init();
+ imx5_pm_init();
}
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 82e79c6..58aeaf5 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -169,14 +169,9 @@ static int __init imx5_pm_common_init(void)
return imx5_cpuidle_init();
}
-void __init imx51_pm_init(void)
+void __init imx5_pm_init(void)
{
int ret = imx5_pm_common_init();
if (!ret)
suspend_set_ops(&mx5_suspend_ops);
}
-
-void __init imx53_pm_init(void)
-{
- imx5_pm_common_init();
-}
--
1.8.1.2
More information about the linux-arm-kernel
mailing list